i typed into the terminal: sudo bearerbox /etc/init.d/kannel [sudo] password for drew: 2009-01-07 15:50:57 [30787] [0] INFO: Debug_lvl = -1, log_file = <none>, log_lvl = 0 2009-01-07 15:50:58 [30787] [0] ERROR: Group does not contain variable 'group'. 2009-01-07 15:50:58 [30787] [0] ERROR: Error found on line 26 of file `/etc/init.d/kannel'. 2009-01-07 15:50:58 [30787] [0] PANIC: Couldn't read configuration from `/etc/init.d/kannel'. 2009-01-07 15:50:58 [30787] [0] PANIC: bearerbox(gw_panic+0x107) [0x80c5227] 2009-01-07 15:50:58 [30787] [0] PANIC: bearerbox(main+0xc2d) [0x80536cd] 2009-01-07 15:50:58 [30787] [0] PANIC: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb78b9050] 2009-01-07 15:50:58 [30787] [0] PANIC: bearerbox [0x8051d51]
-- On Wed, 1/7/09, Nikos Balkanas <[email protected]> wrote: From: Nikos Balkanas <[email protected]> Subject: Re: Ubuntu Installation with DLR mysql To: "Drew Stockler" <[email protected]>, [email protected], "Alvaro Cornejo" <[email protected]> Date: Wednesday, January 7, 2009, 3:44 PM I see nothing wrong here. All configuration seems good. You are using a 2 year old gateway, though. That's what you get for working with binaries... This doesn't seem as the same logfile, though. As Alvaro suggested, which log file listed the error? BR, Nikos ----- Original Message ----- From: Drew Stockler To: [email protected] ; Alvaro Cornejo ; Nikos Balkanas Sent: Wednesday, January 07, 2009 11:07 PM Subject: Re: Ubuntu Installation with DLR mysql Version 1.4.1-2 here is the first 100 lines at start up 2009-01-07 14:57:48 [29955] [0] INFO: Added logfile `/var/log/kannel/bearerbox.txt' with level `0'. 2009-01-07 14:57:48 [29955] [0] INFO: HTTP: Opening server at port 13000. 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread) 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run) 2009-01-07 14:57:48 [29955] [0] DEBUG: starting smsbox connection module 2009-01-07 14:57:48 [29955] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 4 (gw/bb_boxc.c:sms_to_smsboxes) 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 5 (gw/bb_boxc.c:smsboxc_run) 2009-01-07 14:57:48 [29955] [0] INFO: Set SMS resend frequency to 60 seconds. 2009-01-07 14:57:48 [29955] [0] INFO: SMS resend retry set to unlimited. 2009-01-07 14:57:48 [29955] [0] INFO: DLR rerouting for smsc id <(null)> disabled. 2009-01-07 14:57:48 [29955] [0] INFO: AT2[/dev/ttyS0]: configuration doesn't show modemtype. will autodetect 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 7 (gw/bb_smscconn.c:sms_router) 2009-01-07 14:57:48 [29955] [0] DEBUG: starting UDP sender/receiver module 2009-01-07 14:57:48 [29955] [0] INFO: Adding interface * 2009-01-07 14:57:48 [29955] [0] DEBUG: udpc_create: Bound to UDP <0.0.0.0:9200> 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 8 (gw/bb_udp.c:udp_receiver) 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 9 (gw/bb_udp.c:udp_sender) 2009-01-07 14:57:48 [29955] [0] DEBUG: udpc_create: Bound to UDP <0.0.0.0:9201> 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 10 (gw/bb_udp.c:udp_receiver) 2009-01-07 14:57:48 [29955] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 29955. 2009-01-07 14:57:48 [29955] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 29955. 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 11 (gw/bb_udp.c:udp_sender) 2009-01-07 14:57:48 [29955] [0] DEBUG: starting wapbox connection module 2009-01-07 14:57:48 [29955] [0] ERROR: Missing wapbox-port variable, cannot start WAP 2009-01-07 14:57:48 [29955] [0] DEBUG: starting WDP router 2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 12 (gw/bearerbox.c:wdp_router) 2009-01-07 14:57:48 [29955] [0] INFO: ---------------------------------------- 2009-01-07 14:57:48 [29955] [0] INFO: Kannel bearerbox II version 1.4.1 starting 2009-01-07 14:57:48 [29955] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 29955. 2009-01-07 14:57:48 [29955] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps to pid 29955. 2009-01-07 14:57:48 [29955] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 29955. 2009-01-07 14:57:48 [29955] [6] DEBUG: AT2[/dev/ttyS0]: detecting modem speed. 2009-01-07 14:57:48 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device 2009-01-07 14:57:48 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2009-01-07 14:57:48 [29955] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps to pid 29955. 2009-01-07 14:57:48 [29955] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) maps to pid 29955. 2009-01-07 14:57:48 [29955] [7] DEBUG: sms_router: time to sleep 30.00 secs. 2009-01-07 14:57:48 [29955] [8] DEBUG: Thread 8 (gw/bb_udp.c:udp_receiver) maps to pid 29955. 2009-01-07 14:57:48 [29955] [9] DEBUG: Thread 9 (gw/bb_udp.c:udp_sender) maps to pid 29955. 2009-01-07 14:57:48 [29955] [10] DEBUG: Thread 10 (gw/bb_udp.c:udp_receiver) maps to pid 29955. 2009-01-07 14:57:48 [29955] [11] DEBUG: Thread 11 (gw/bb_udp.c:udp_sender) maps to pid 29955. 2009-01-07 14:57:48 [29955] [12] DEBUG: Thread 12 (gw/bearerbox.c:wdp_router) maps to pid 29955. 2009-01-07 14:57:48 [29955] [12] DEBUG: udp_die: removing producers from udp-lists 2009-01-07 14:57:48 [29955] [12] DEBUG: Thread 12 (gw/bearerbox.c:wdp_router) terminates. 2009-01-07 14:57:48 [29955] [0] INFO: MAIN: Start-up done, entering mainloop 2009-01-07 14:57:48 [29955] [0] DEBUG: AT2[/dev/ttyS0]: start called 2009-01-07 14:57:48 [29955] [7] DEBUG: sms_router: gwlist_len = 0 2009-01-07 14:57:49 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2009-01-07 14:57:49 [29955] [6] INFO: AT2[/dev/ttyS0]: speed set to 115200 2009-01-07 14:57:49 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M 2009-01-07 14:57:49 [29955] [5] INFO: Client connected from <127.0.0.1> 2009-01-07 14:57:49 [29955] [5] DEBUG: Started thread 13 (gw/bb_boxc.c:function) 2009-01-07 14:57:49 [29955] [13] DEBUG: Thread 13 (gw/bb_boxc.c:function) maps to pid 29955. 2009-01-07 14:57:49 [29955] [13] DEBUG: Started thread 14 (gw/bb_boxc.c:boxc_sender) 2009-01-07 14:57:49 [29955] [14] DEBUG: Thread 14 (gw/bb_boxc.c:boxc_sender) maps to pid 29955. 2009-01-07 14:57:51 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:57:55 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:57:59 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:03 [29955] [6] INFO: AT2[/dev/ttyS0]: closing device 2009-01-07 14:58:03 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device 2009-01-07 14:58:03 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2009-01-07 14:58:04 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2009-01-07 14:58:04 [29955] [6] INFO: AT2[/dev/ttyS0]: speed set to 57600 2009-01-07 14:58:04 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M 2009-01-07 14:58:06 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:10 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:14 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:18 [29955] [6] INFO: AT2[/dev/ttyS0]: closing device 2009-01-07 14:58:18 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device 2009-01-07 14:58:18 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2009-01-07 14:58:19 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2009-01-07 14:58:19 [29955] [6] INFO: AT2[/dev/ttyS0]: speed set to 38400 2009-01-07 14:58:19 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M 2009-01-07 14:58:21 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:25 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:29 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:33 [29955] [6] INFO: AT2[/dev/ttyS0]: closing device 2009-01-07 14:58:33 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device 2009-01-07 14:58:33 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2009-01-07 14:58:34 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2009-01-07 14:58:34 [29955] [6] INFO: AT2[/dev/ttyS0]: speed set to 19200 2009-01-07 14:58:34 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M 2009-01-07 14:58:36 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:40 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:44 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:48 [29955] [6] INFO: AT2[/dev/ttyS0]: closing device 2009-01-07 14:58:48 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device 2009-01-07 14:58:48 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2009-01-07 14:58:49 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2009-01-07 14:58:49 [29955] [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 2009-01-07 14:58:49 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M 2009-01-07 14:58:51 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2009-01-07 14:58:51 [29955] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2009-01-07 14:58:51 [29955] [6] INFO: AT2[/dev/ttyS0]: closing device 2009-01-07 14:58:51 [29955] [6] INFO: AT2[/dev/ttyS0]: detect speed is 9600 2009-01-07 14:58:51 [29955] [6] DEBUG: AT2[/dev/ttyS0]: detecting modem type 2009-01-07 14:58:51 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device --- On Wed, 1/7/09, Nikos Balkanas <[email protected]> wrote: From: Nikos Balkanas <[email protected]> Subject: Re: Ubuntu Installation with DLR mysql To: "Drew Stockler" <[email protected]>, [email protected], "Alvaro Cornejo" <[email protected]> Date: Wednesday, January 7, 2009, 2:30 PM This looks bad. It is complaining that it cannot find "group = core" in the configuration file. Which clearly you do have. Furthermore it shouldn't start if it didn't have a correct core group. Smells like memory corruption... What version gateway are you using? Could you send an excerpt from the bearerbox (100 or so lines) from its startup? BR, Nikos ----- Original Message ----- From: Drew Stockler To: [email protected] ; Alvaro Cornejo Sent: Wednesday, January 07, 2009 9:42 PM Subject: Re: Ubuntu Installation with DLR mysql I get this: 2009-01-07 13:39:22 [27781] [0] INFO: Debug_lvl = -1, log_file = <none>, log_lvl = 0 2009-01-07 13:39:23 [27781] [0] PANIC: DLR: can't find group core 2009-01-07 13:39:23 [27781] [0] PANIC: bearerbox(gw_panic+0x107) [0x80c5227] 2009-01-07 13:39:23 [27781] [0] PANIC: bearerbox(dlr_init+0x1c8) [0x805ce48] 2009-01-07 13:39:23 [27781] [0] PANIC: bearerbox(main+0x10a) [0x8052baa] 2009-01-07 13:39:23 [27781] [0] PANIC: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb789b050] 2009-01-07 13:39:23 [27781] [0] PANIC: bearerbox [0x8051d51] --- On Wed, 1/7/09, Alvaro Cornejo <[email protected]> wrote: From: Alvaro Cornejo <[email protected]> Subject: Re: Ubuntu Installation with DLR mysql To: "Drew Stockler" <[email protected]>, "[email protected]" <[email protected]> Date: Wednesday, January 7, 2009, 12:54 PM Please cc to kannel list so you can receive better support. the ./configure make, make install is only needed when downloading sources from kannel. otherwise apt-get install is enough try bearerbox pathtoconfigfile to see if there are errors when running bearerbox and if it finds mysql files |-----------------------------------------------------------------------------------------------------------------| Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com On Wed, Jan 7, 2009 at 1:15 PM, Drew Stockler <[email protected]> wrote: > http://packages.ubuntu.com/hardy/i386/kannel/filelist > > According to ubuntu, there is no files called configure to run in the > directory in which kannel is installed /etc/init.d/kannel > > On the page below it says that it is compiled with ssl, mysql and native > malloc > > http://packages.ubuntu.com/hardy/i386/kannel/filelist > > When you downloaded kannel from the hardy repositories did you have to do > the configure; make; install? > > The tables are set up and the config is below > > group = core > admin-port = 13000 > admin-password = bar > admin-deny-ip = "" > admin-allow-ip = "127.0.0.1" > smsbox-port = 13003 > wdp-interface-name = "*" > log-file = "/var/log/kannel/bearerbox.txt" > log-level = 0 > box-deny-ip = "*.*.*.*" > box-allow-ip = "127.0.0.1" > dlr-storage = mysql > > > group = smsc > smsc = at > modemtype = auto > device = /dev/ttyS0 > my-number = 3124010078 > sms-center = +13123149810 > connect-allow-ip = 127.0.0.1 > > > > group = sms-service > keyword = > keyword-regex = .* > catch-all = yes > max-messages = 0 > get-url = "http://localhost/sms?phone=%p&text=%a"; > > group = sendsms-user > username = ***** > password = ***** > max-messages = 10 > concatenation = true > > group = smsbox > bearerbox-host = 127.0.0.1 > sendsms-port = 13004 > global-sender = 3124010078 > log-file = "/var/log/kannel/smsbox.txt" > log-level = 0 > > include= "/usr/share/doc/kannel/examples/modems.conf" > > group = mysql-connection > id = mydlr > host = localhost > username = *** > password = ****** > database = dlr > max-connections = 1 > > group = dlr-db > id = mydlr > table = dlr > field-smsc = smsc > field-timestamp = ts > field-destination = destination > field-source = source > field-service = service > field-url = url > field-mask = mask > field-status = status > field-boxc-id = boxc > > > > > > --- On Wed, 1/7/09, Alvaro Cornejo <[email protected]> wrote: > > From: Alvaro Cornejo <[email protected]> > Subject: Re: Ubuntu Installation with DLR mysql > To: "Drew Stockler" <[email protected]>, "[email protected]" > <[email protected]> > Date: Wednesday, January 7, 2009, 9:30 AM > > Just run > > (mysql must be installed before this) > > ./configure --with-mysql --enable-start-stop-daemon > > on the dir where you downloaded kannel > > then make > > and make install (if you want to change default install dir doit here > > > > > > |-----------------------------------------------------------------------------------------------------------------| > Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el > Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias via > SMS y GPRS online > Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com > > > > On Tue, Jan 6, 2009 at 9:04 PM, Drew Stockler <[email protected]> > wrote: >> I have the tables created correctly. Here are my confige enteries which > are >> correct. The only thing I am having trouble with is the make ./configure > I >> don't understand the syntax via the command line. Is there any > documentation >> for that. i have searched the user guide, and google. I see ./configure > and >> type make all the time but when i put them into the command line i get >> nothing. >> >> Thanks for all the help, >> >> Drew >> >> --- On Tue, 1/6/09, Alvaro Cornejo <[email protected]> wrote: >> >> From: Alvaro Cornejo <[email protected]> >> Subject: Re: > Ubuntu Installation with DLR mysql >> To: "Drew Stockler" <[email protected]> >> Cc: [email protected] >> Date: Tuesday, January 6, 2009, 7:09 PM >> >> Just follow indications on documentation about creation of dlr tables, >> make of kannel with mysql support and the appropiate config entries. >> >> I use ubuntu hardy with kannel & mysql from packages with no problem >> >> Regards >> >> Alvaro >> >> >> On Tue, 2009-01-06 at 16:41 -0800, Drew Stockler wrote: >>> Is there anyone out there who installed kannel from the ubuntu >>> repositories and successfully integrated kannel with mysql for > dlr's? >>> >>> All the documenation i saw was for a downloaded install from >>> kannel.org then do a ./configure make and include the mysql commands. >>> >>> Is their a procedure for a debian install/ubuntu repository I > can >>> follow? >>> >>> Thanks >>> Drew >>> >>> >>> >>> >> >> >> > >
