Thanks, Falco.
Always a pleasure to learn a few new tricks ;-)
----- Original Message -----
From: "Falko Ziemann" <[email protected]>
To: "Nikos Balkanas" <[email protected]>; <[email protected]>
Cc: <[email protected]>
Sent: Thursday, February 12, 2009 9:51 AM
Subject: Re: send sms to application on specific port on phone
Sorry Nikos, this time you are wrong.
Mariella, You can send SMS to a specified port. But this is not
defined inside kannel. You have to set a special UDH. Inside the UDH a
Port can be specified. But I currently don't find the specification
for it in my archives. Please google a little bit, try searching for
UDH, Port and Smart Messaging. And when you find something, please
post it to the list.
Regards
Falko
Am 12.02.2009 um 01:03 schrieb Nikos Balkanas:
Hi Mariella,
What you describe is not possible. It is not even a kannel issue.
PPG is sent as a binary SMS. It follows the same route as regular
SMS. From bearerbox it is delivered to an SMSc and from there to the
mobile. Therefore the SMSc is responsible for delivering the content
to the mobile. This happens according to the SMS spec and is not
configurable.
BR,
Nikos
----- Original Message ----- From: <[email protected]>
To: <[email protected]>
Sent: Wednesday, February 11, 2009 12:21 PM
Subject: send sms to application on specific port on phone
Hi everyone, I have installed kannel and i sended successfully
simple sms and
wap push sms to my nokia phone. Now i would send with kannel a sms
(simple or
wap push) to a midlet installed on my phone on port 50000. What i
must specifed
in file.conf and where? Thanks in advance..
Mariella...
