;-)
And now I found the real trick in my archives:
The UDH has to be 060504ddddssss
where "dddd" is the destination- and ssss is the source-port in hex.
You can find the technical details in GSM 03.40 specification Chapter
9.2.3.24.3 "Application Port Addressing 8 bit address"
Regards
Falko
Am 12.02.2009 um 17:37 schrieb Nikos Balkanas:
Thanks, Falco.
Always a pleasure to learn a few new tricks ;-)
----- Original Message ----- From: "Falko Ziemann" <[email protected]>
To: "Nikos Balkanas" <[email protected]>;
<[email protected]>
Cc: <[email protected]>
Sent: Thursday, February 12, 2009 9:51 AM
Subject: Re: send sms to application on specific port on phone
Sorry Nikos, this time you are wrong.
Mariella, You can send SMS to a specified port. But this is not
defined inside kannel. You have to set a special UDH. Inside the
UDH a Port can be specified. But I currently don't find the
specification for it in my archives. Please google a little bit,
try searching for UDH, Port and Smart Messaging. And when you find
something, please post it to the list.
Regards
Falko
Am 12.02.2009 um 01:03 schrieb Nikos Balkanas:
Hi Mariella,
What you describe is not possible. It is not even a kannel issue.
PPG is sent as a binary SMS. It follows the same route as regular
SMS. From bearerbox it is delivered to an SMSc and from there to
the mobile. Therefore the SMSc is responsible for delivering the
content to the mobile. This happens according to the SMS spec and
is not configurable.
BR,
Nikos
----- Original Message ----- From: <[email protected]>
To: <[email protected]>
Sent: Wednesday, February 11, 2009 12:21 PM
Subject: send sms to application on specific port on phone
Hi everyone, I have installed kannel and i sended successfully
simple sms and
wap push sms to my nokia phone. Now i would send with kannel a
sms (simple or
wap push) to a midlet installed on my phone on port 50000. What
i must specifed
in file.conf and where? Thanks in advance..
Mariella...
