Hi, What part do you not understand? "You need CNMI in your modem configuration". Try different settings. Also if you need further help please attach detailed bearerbox logs.
BR, Nikos ----- Original Message ----- From: Pavan Gupta To: Nikos Balkanas Cc: [email protected] Sent: Sunday, October 04, 2009 10:08 AM Subject: Re: Nokia 5200 with Kannel Hello, Thank you for your reply. I am a newbie to Kannel. 1. I have changed my config file for core group based on your suggestions. Following is the configuration file. 2. I am not sure what do you mean by: "Also noone said to skip the CNMI from your modem configuration. It means "New Message Indication", or how the modem should handle incoming SMS. 1,2,0,0 might be work for you." This is the modem config: group = modems id = generic name = "Generic Modem" detect-string = "NOKIA" detect-string2 = "5200" init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" #init-string = "AT+CNMI=1,2,0,0" #keepalive-cmd = "AT+CBC;+CSQ;+CMGF=0? reset-string = "ATZ" message-storage = "SM" Thanking you for your help. Pavan ----- Original Message ----- From: Nikos Balkanas To: Pavan Gupta Cc: [email protected] Sent: Sunday, October 04, 2009 11:50 AM Subject: Re: Nokia 5200 with Kannel Hi, You have several problems in your configuration. Please read the User's guide on how to configure it. Hint: you need store-type and store-location. Also noone said to skip the CNMI from your modem configuration. It means "New Message Indication", or how the modem should handle incoming SMS. 1,2,0,0 might be work for you. If you still have problems with it, please post your bearerbox logs. BR, Nikos ----- Original Message ----- From: Pavan Gupta To: Nikos Balkanas ; Alejandro Guerrieri Cc: [email protected] Sent: Sunday, October 04, 2009 8:47 AM Subject: Re: Nokia 5200 with Kannel Hello, I tried your suggestion and it worked!!! Tried init-string of other modems in modems.conf and one of them clicked for Nokia 5200. This is configuration that worked. group = modems id = generic name = "Generic Modem" init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" The configuration file has been pasted below: However, now Kannel is unable to grab a SMS from the phone. I am not sure what is going wrong. group = core admin-port = 13000 smsbox-port = 13001 admin-password = bar #status-password = foo #admin-deny-ip = "" #admin-allow-ip = "" #log-file = "/tmp/kannel.log" #log-level = 0 box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" #unified-prefix = "+358,00358,0;+,00" #access-log = "/tmp/access.log" #store-file = "kannel.store" #ssl-server-cert-file = "cert.pem" #ssl-server-key-file = "key.pem" #ssl-certkey-file = "mycertandprivkeyfile.pem" #--------------------------------------------- # SMSC CONNECTIONS # # SMSC connections are created in bearerbox and they handle SMSC specific # protocol and message relying. You need these to actually receive and send # messages to handset, but can use GSM modems as virtual SMSCs # This is a fake smsc connection, _only_ used to test the system and services. # It really cannot relay messages to actual handsets! group = smsc smsc = at modemtype = auto #device = /dev/ACM0 device = /dev/ttyS10 #device = /dev/ttyUSB0 smsc-id = UPLIFT port = 10000 speed = 0 connect-allow-ip = 127.0.0.1 #--------------------------------------------- # SMSBOX SETUP # # Smsbox(es) do higher-level SMS handling after they have been received from # SMS centers by bearerbox, or before they are given to bearerbox for delivery group = smsbox bearerbox-host = 127.0.0.1 sendsms-port = 13013 global-sender = 13013 #sendsms-chars = "0123456789 +-" #log-file = "/tmp/smsbox.log" #log-level = 0 #access-log = "/tmp/access.log" #--------------------------------------------- # SEND-SMS USERS # # These users are used when Kannel smsbox sendsms interface is used to # send PUSH sms messages, i.e. calling URL like # http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar... group = sendsms-user username = tester password = foobar #user-deny-ip = "" #user-allow-ip = "" #--------------------------------------------- # SERVICES # # These are 'responses' to sms PULL messages, i.e. messages arriving from # handsets. The response is based on message content. Only one sms-service is # applied, using the first one to match. group = sms-service keyword = nop text = "You asked nothing and I did it!" # There should be always a 'default' service. This service is used when no # other 'sms-service' is applied. group = sms-service keyword = default text = "No service specified" get-url = "http://localhost:8080/examples/servlets/servlet/RequestParamExample?phone=%p&text=%a"; Regards, Pavan Gupta ----- Original Message ----- From: Nikos Balkanas To: Alejandro Guerrieri ; Pavan Gupta Cc: [email protected] Sent: Sunday, October 04, 2009 12:25 AM Subject: Re: Nokia 5200 with Kannel Hi, A faster way might be to just look at the modems.conf file and use some of the different CNMI values you find in there (trial & error). Of course you will need to copy the nokia definition to your own and modify the init-string. BR, Nikos ----- Original Message ----- From: Alejandro Guerrieri To: Pavan Gupta Cc: [email protected] Sent: Saturday, October 03, 2009 9:40 PM Subject: Re: Nokia 5200 with Kannel The AT+CNMI init string varies wildly from device to device. You'll probably need to change the init string according to your device's requirement. Sadly, there's not a once-fits-all init string and you'll need to find your phone's technical documentation in order to be able to create the proper init string for it (have you tried googling around for it?). BTW, if you do so, please share it over the list so others can benefit from your findings. Regards, Alejandro On Sat, Oct 3, 2009 at 7:43 PM, Pavan Gupta <[email protected]> wrote: Hello, I have been trying to use Nokia 5200 with Kannel. This is the error I get: 2009-10-03 23:07:45 [48708] [6] DEBUG: AT2[UPLIFT]: <-- OK 2009-10-03 23:07:45 [48708] [6] DEBUG: AT2[UPLIFT]: --> AT+CNMI=1,2,0,1,0^M 2009-10-03 23:07:45 [48708] [6] DEBUG: AT2[UPLIFT]: <-- ERROR 2009-10-03 23:07:45 [48708] [6] ERROR: AT2[UPLIFT]: Generic error: ERROR 2009-10-03 23:07:45 [48708] [6] ERROR: AT2[UPLIFT]: Initialization of device fai led. 2009-10-03 23:07:45 [48708] [6] INFO: AT2[UPLIFT]: Closing device 1. Does Kannel work with Nokia 5200? Is there an updated list of cell phones that interoperate with Kannel? 2. What should be done resolve above error? Thanking you and looking forward to your prompt reply. Regards, Pavan Gupta
