Hey guys, Basically, that's what we are trying to do. Except that Pavan was doing it the wrong way (i.e. modifying the generic modem or using modemtype = auto in the smsc) so I am walking him step by step. Sorry for the spam.
BR, Nikos ----- Original Message ----- From: Alejandro Guerrieri To: Alvaro Cornejo Cc: [email protected] Sent: Monday, October 05, 2009 4:34 PM Subject: Re: Nokia 5200 with Kannel The CNMI format and meaning varies from phone to phone. Maybe the phone does support CNMI, only with a different format than the one configured. Try searching for your phone's technical manual or AT command set, or try with other formats present on modems.conf as Nikos suggested a couple of days ago. Regards, Alejandro On Mon, Oct 5, 2009 at 3:25 PM, Alvaro Cornejo <[email protected]> wrote: Hi Use minicom or vwdial or any other communication software to test your modem type in cnmi=? of cnmi? if you did get an error, this most probably means your modem does NOT support CNMI command and therefore you will NOT BE ABLE to receive inccoming messages in your application... To be sure google for your modem specs and find if it support CNMI commmand. Your option: look for another phone Regards Alvaro |-----------------------------------------------------------------------------------------------------------------| Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com 2009/10/4 Pavan Gupta <[email protected]>: > Hi, > 1. How do I configure that? Sorry if this is a trivial question. I don't > know much about modem settings. > 2. The bearer logs are attached to this email. > 3. Modem Config is: > > group = modems > > id = generic > > name = "Generic Modem" > > detect-string = "NOKIA" > > detect-string2 = "5200" > > init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > #keepalive-cmd = "AT+CBC;+CSQ;+CMGF=0? > > reset-string = "ATZ" > > message-storage = "SM" > > 4. Bearer config: > > > group = core > > admin-port = 13000 > > smsbox-port = 13001 > > admin-password = bar > > status-password = foo > > admin-deny-ip = "*.*.*.*" > > admin-allow-ip = "127.0.0.1" > > #log-file = "/tmp/kannel.log" > > #log-level = 0 > > log-file = "kannel.log" > > log-level = 0 > > box-deny-ip = "*.*.*.*" > > box-allow-ip = "127.0.0.1" > > #unified-prefix = "+358,00358,0;+,00" > > #access-log = "/tmp/access.log" > > #store-file = "kannel.store" > > access-log = "access.log" > > store-type = file > > store-location = "/cygdrive/c/kannel/gateway-1.4.3/gw/kannel.store" > > > > I would appreciate if you could help us to resolve the problem. > > Thanking You. > > Regards, > > Pavan > > ----- Original Message ----- > From: Nikos Balkanas > To: Pavan Gupta > Cc: [email protected] > Sent: Sunday, October 04, 2009 4:38 PM > Subject: Re: Nokia 5200 with Kannel > Hi, > > What part do you not understand? "You need CNMI in your modem > configuration". Try different settings. Also if you need further help please > attach detailed bearerbox logs. > > BR, > Nikos > > ----- Original Message ----- > From: Pavan Gupta > To: Nikos Balkanas > Cc: [email protected] > Sent: Sunday, October 04, 2009 10:08 AM > Subject: Re: Nokia 5200 with Kannel > Hello, > Thank you for your reply. I am a newbie to Kannel. > > 1. I have changed my config file for core group based on your suggestions. > Following is the configuration file. > > > 2. I am not sure what do you mean by: > "Also noone said to skip the CNMI from your modem configuration. It means > "New Message Indication", or how the modem should handle incoming SMS. > 1,2,0,0 might be work for you." > > This is the modem config: > > group = modems > > id = generic > > name = "Generic Modem" > > detect-string = "NOKIA" > > detect-string2 = "5200" > > init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > #init-string = "AT+CNMI=1,2,0,0" > > #keepalive-cmd = "AT+CBC;+CSQ;+CMGF=0? > > reset-string = "ATZ" > > message-storage = "SM" > > > > Thanking you for your help. > > Pavan > > ----- Original Message ----- > From: Nikos Balkanas > To: Pavan Gupta > Cc: [email protected] > Sent: Sunday, October 04, 2009 11:50 AM > Subject: Re: Nokia 5200 with Kannel > Hi, > > You have several problems in your configuration. Please read the User's > guide on how to configure it. Hint: you need store-type and store-location. > Also noone said to skip the CNMI from your modem configuration. It means > "New Message Indication", or how the modem should handle incoming SMS. > 1,2,0,0 might be work for you. > > If you still have problems with it, please post your bearerbox logs. > > BR, > Nikos > > ----- Original Message ----- > From: Pavan Gupta > To: Nikos Balkanas ; Alejandro Guerrieri > Cc: [email protected] > Sent: Sunday, October 04, 2009 8:47 AM > Subject: Re: Nokia 5200 with Kannel > Hello, > I tried your suggestion and it worked!!! Tried init-string of other modems > in modems.conf and one of them clicked for Nokia 5200. > > This is configuration that worked. > > group = modems > > id = generic > > name = "Generic Modem" > > init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > The configuration file has been pasted below: > > However, now Kannel is unable to grab a SMS from the phone. I am not sure > what is going wrong. > > group = core > > admin-port = 13000 > > smsbox-port = 13001 > > admin-password = bar > > #status-password = foo > > #admin-deny-ip = "" > > #admin-allow-ip = "" > > #log-file = "/tmp/kannel.log" > > #log-level = 0 > > box-deny-ip = "*.*.*.*" > > box-allow-ip = "127.0.0.1" > > #unified-prefix = "+358,00358,0;+,00" > > #access-log = "/tmp/access.log" > > #store-file = "kannel.store" > > #ssl-server-cert-file = "cert.pem" > > #ssl-server-key-file = "key.pem" > > #ssl-certkey-file = "mycertandprivkeyfile.pem" > > #--------------------------------------------- > > # SMSC CONNECTIONS > > # > > # SMSC connections are created in bearerbox and they handle SMSC specific > > # protocol and message relying. You need these to actually receive and send > > # messages to handset, but can use GSM modems as virtual SMSCs > > > > # This is a fake smsc connection, _only_ used to test the system and > services. > > # It really cannot relay messages to actual handsets! > > group = smsc > > smsc = at > > modemtype = auto > > #device = /dev/ACM0 > > device = /dev/ttyS10 > > #device = /dev/ttyUSB0 > > smsc-id = UPLIFT > > port = 10000 > > speed = 0 > > connect-allow-ip = 127.0.0.1 > > #--------------------------------------------- > > # SMSBOX SETUP > > # > > # Smsbox(es) do higher-level SMS handling after they have been received from > > # SMS centers by bearerbox, or before they are given to bearerbox for > delivery > > group = smsbox > > bearerbox-host = 127.0.0.1 > > sendsms-port = 13013 > > global-sender = 13013 > > #sendsms-chars = "0123456789 +-" > > #log-file = "/tmp/smsbox.log" > > #log-level = 0 > > #access-log = "/tmp/access.log" > > #--------------------------------------------- > > # SEND-SMS USERS > > # > > # These users are used when Kannel smsbox sendsms interface is used to > > # send PUSH sms messages, i.e. calling URL like > > # > http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar... > > group = sendsms-user > > username = tester > > password = foobar > > #user-deny-ip = "" > > #user-allow-ip = "" > > #--------------------------------------------- > > # SERVICES > > # > > # These are 'responses' to sms PULL messages, i.e. messages arriving from > > # handsets. The response is based on message content. Only one sms-service > is > > # applied, using the first one to match. > > group = sms-service > > keyword = nop > > text = "You asked nothing and I did it!" > > # There should be always a 'default' service. This service is used when no > > # other 'sms-service' is applied. > > group = sms-service > > keyword = default > > text = "No service specified" > > get-url = > "http://localhost:8080/examples/servlets/servlet/RequestParamExample?phone=%p&text=%a"; > > Regards, > > Pavan Gupta > > ----- Original Message ----- > From: Nikos Balkanas > To: Alejandro Guerrieri ; Pavan Gupta > Cc: [email protected] > Sent: Sunday, October 04, 2009 12:25 AM > Subject: Re: Nokia 5200 with Kannel > Hi, > > A faster way might be to just look at the modems.conf file and use some of > the different CNMI values you find in there (trial & error). Of course you > will need to copy the nokia definition to your own and modify the > init-string. > > BR, > Nikos > > ----- Original Message ----- > From: Alejandro Guerrieri > To: Pavan Gupta > Cc: [email protected] > Sent: Saturday, October 03, 2009 9:40 PM > Subject: Re: Nokia 5200 with Kannel > The AT+CNMI init string varies wildly from device to device. You'll probably > need to change the init string according to your device's requirement. > Sadly, there's not a once-fits-all init string and you'll need to find your > phone's technical documentation in order to be able to create the proper > init string for it (have you tried googling around for it?). > BTW, if you do so, please share it over the list so others can benefit from > your findings. > Regards, > Alejandro > > On Sat, Oct 3, 2009 at 7:43 PM, Pavan Gupta <[email protected]> wrote: >> >> Hello, >> I have been trying to use Nokia 5200 with Kannel. This is the error I get: >> >> 2009-10-03 23:07:45 [48708] [6] DEBUG: AT2[UPLIFT]: <-- OK >> 2009-10-03 23:07:45 [48708] [6] DEBUG: AT2[UPLIFT]: --> >> AT+CNMI=1,2,0,1,0^M >> 2009-10-03 23:07:45 [48708] [6] DEBUG: AT2[UPLIFT]: <-- ERROR >> 2009-10-03 23:07:45 [48708] [6] ERROR: AT2[UPLIFT]: Generic error: ERROR >> 2009-10-03 23:07:45 [48708] [6] ERROR: AT2[UPLIFT]: Initialization of >> device fai >> led. >> 2009-10-03 23:07:45 [48708] [6] INFO: AT2[UPLIFT]: Closing device >> >> >> 1. Does Kannel work with Nokia 5200? Is there an updated list of cell >> phones that interoperate with Kannel? >> 2. What should be done resolve above error? >> >> Thanking you and looking forward to your prompt reply. >> Regards, >> Pavan Gupta >
