Hi Alejando Guerrieri,
I fallowed the same document and the parameters as below i saw over
there in the userguide.
*add-smsc** : *Adds an SMSC link previously removed or created
after the service was started. Password required. Additionally the smsc
parameter must be given (see above).* *
*remove-smsc:** *Removes an existing SMSC link. Password required.
Additionally the smsc parameter must be given (see above). If you want a
permanent removal, you should also remove the entry from the
configuration file or it will be recreated after a service restart.
http://192.168.1.94:13000/add-smsc?password=xxxxx&smsc=kiran is this
correct ?
http://192.168.1.94:13000/remove-smsc?password=xxxxx&smsc=reddy is this
correct ?
**
Regards,
Kiran Reddy
Alejandro Guerrieri wrote:
The CVS documentation is on the "Download" page on Kannel's site.
If you'd REALLY googled a bit, for example "kannel cvs documentation"
would have pointed you to that place as well:
http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#AEN876
READ the text on the right of each command. If that's not enough for
you, take a hint from the error codes you get when you miss the extra
parameters, but you MUST be able to figure out from there.
On Fri, Feb 19, 2010 at 7:17 AM, [email protected]
<mailto:[email protected]> <[email protected]
<mailto:[email protected]>> wrote:
Hi Alejandro,
I am not lazy and I spend more time on googling then i started
posting questions. I already gone through kannel user guide but
there is one example is there.How to understand other parameters
passing through kannel http admin commands.
Thanks and Regards,
Kiran Reddy
Alejandro Guerrieri wrote:
... and we don't need to know which stuff _works_ for you, only
the ones that _doesn't_ work (well, they work, you're just don't
using adding the proper parameters).
Besides, everything's perfectly documented. Don't be lazy and
spend some time googling and reading instead of resending the
same questions again and again...
On Thu, Feb 18, 2010 at 5:19 PM, Garth Patil
<[email protected] <mailto:[email protected]>> wrote:
Posting multiple times to the list and to members
individually is a
really great way to have your question ignored. The log-level
method
is documented in the current release user guide. The
add-smsc, and
remove-smsc methods are documented in the user guide for the CVS
version, as they were recently added:
http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#AEN876
http://www.kannel.org/pipermail/devel/2009-July/002753.html
On Thu, Feb 18, 2010 at 5:23 AM, [email protected]
<mailto:[email protected]>
<[email protected]
<mailto:[email protected]>> wrote:
>
> Dear All,
>
> Please help me below mentioned urls which i don't know how
to use. I fallowed the Kannel User guide but there is
explanation is there please help me.
>
> http://192.168.1.94:13000/status?password=xxxxx (it is
working for me)
>
> http://192.168.1.94:13000/store-status?password=xxxxx (it
is working for me)
>
> http://192.168.1.94:13000/log-level?password=xxxxx ( How to
use this with URL example ?)
>
> http://192.168.1.94:13000/shutdown?password=xxxxx (It is
working for me)
>
> http://192.168.1.94:13000/suspend?password=xxxxx (it is
working for me)
>
> http://192.168.1.94:13000/isolate?password=xxxxx(It
<http://192.168.1.94:13000/isolate?password=xxxxx%28It> is
working for me)
>
> http://192.168.1.94:13000/resume?password=xxxxx(it
<http://192.168.1.94:13000/resume?password=xxxxx%28it> is
working for me)
>
> http://192.168.1.94:13000/restart?password=xxxxx(it
<http://192.168.1.94:13000/restart?password=xxxxx%28it> is
working for me)
>
> http://192.168.1.94:13000/flush-dlr?password=xxxxx(it
<http://192.168.1.94:13000/flush-dlr?password=xxxxx%28it> is
working for me)
>
>
http://192.168.1.94:13000/stop-smsc?password=xxxxx&smsc=xxxx(it
<http://192.168.1.94:13000/stop-smsc?password=xxxxx&smsc=xxxx%28it>
is working for me)
>
>
http://192.168.1.94:13000/start-smsc?password=xxxxx&smsc=xxxx(it
<http://192.168.1.94:13000/start-smsc?password=xxxxx&smsc=xxxx%28it>
is working for me)
>
> http://192.168.1.94:13000/add-smsc?password=xxxxx (How to
use this with URL example ?)
>
> http://192.168.1.94:13000/remove-smsc?password=xxxxx (How
to use this with URL Example ?)
>
> http://192.168.1.94:13000/reload-lists?password=xxxxx (it
is working for me)
>
>
> Thanks and Regards,
> --
>
> Kiran Reddy
>
> Network Admin/System Admin
>
> MPOWER Global Access India Pvt Ltd
>
> +91-9036971573
>
> [email protected]
<mailto:[email protected]>
>
> http://www.mpowerglobal.in
>
> http://www.pushsms.in
>
> Bangalore, India
>
>
