Yes... assuming that you have smsc's with names "kiran" and "reddy" configured on kannel.conf
Give it at try, don't be shy ;) On Fri, Feb 19, 2010 at 12:29 PM, [email protected] < [email protected]> wrote: > Hi Alejando Guerrieri, > > I fallowed the same document and the parameters as below i saw over there > in the userguide. > > *add-smsc** : *Adds an SMSC link previously removed or created > after the service was started. Password required. Additionally the > smscparameter must be given (see above). > * * > > *remove-smsc:** *Removes an existing SMSC link. Password required. > Additionally the smsc parameter must be given (see above). If you want a > permanent removal, you should also remove the entry from the configuration > file or it will be recreated after a service restart. > > http://192.168.1.94:13000/add-smsc?password=xxxxx&smsc=kiran<http://192.168.1.94:13000/add-smsc?password=xxxxx> > is this correct ? > > http://192.168.1.94:13000/remove-smsc?password=xxxxx&smsc=reddy is this > correct ? > ** > Regards, > > Kiran Reddy > > Alejandro Guerrieri wrote: > > The CVS documentation is on the "Download" page on Kannel's site. > > If you'd REALLY googled a bit, for example "kannel cvs documentation" > would have pointed you to that place as well: > > > http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#AEN876 > > READ the text on the right of each command. If that's not enough for you, > take a hint from the error codes you get when you miss the extra parameters, > but you MUST be able to figure out from there. > > On Fri, Feb 19, 2010 at 7:17 AM, [email protected] < > [email protected]> wrote: > >> Hi Alejandro, >> >> I am not lazy and I spend more time on googling then i started posting >> questions. I already gone through kannel user guide but there is one example >> is there.How to understand other parameters passing through kannel http >> admin commands. >> >> >> Thanks and Regards, >> Kiran Reddy >> >> Alejandro Guerrieri wrote: >> >> ... and we don't need to know which stuff _works_ for you, only the ones >> that _doesn't_ work (well, they work, you're just don't using adding the >> proper parameters). >> >> Besides, everything's perfectly documented. Don't be lazy and spend some >> time googling and reading instead of resending the same questions again and >> again... >> >> On Thu, Feb 18, 2010 at 5:19 PM, Garth Patil <[email protected]>wrote: >> >>> Posting multiple times to the list and to members individually is a >>> really great way to have your question ignored. The log-level method >>> is documented in the current release user guide. The add-smsc, and >>> remove-smsc methods are documented in the user guide for the CVS >>> version, as they were recently added: >>> >>> http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#AEN876 >>> http://www.kannel.org/pipermail/devel/2009-July/002753.html >>> >>> On Thu, Feb 18, 2010 at 5:23 AM, [email protected] >>> <[email protected]> wrote: >>> > >>> > Dear All, >>> > >>> > Please help me below mentioned urls which i don't know how to use. I >>> fallowed the Kannel User guide but there is explanation is there please help >>> me. >>> > >>> > http://192.168.1.94:13000/status?password=xxxxx (it is working for me) >>> > >>> > http://192.168.1.94:13000/store-status?password=xxxxx (it is working >>> for me) >>> > >>> > http://192.168.1.94:13000/log-level?password=xxxxx ( How to use this >>> with URL example ?) >>> > >>> > http://192.168.1.94:13000/shutdown?password=xxxxx (It is working for >>> me) >>> > >>> > http://192.168.1.94:13000/suspend?password=xxxxx (it is working for >>> me) >>> > >>> > http://192.168.1.94:13000/isolate?password=xxxxx(It<http://192.168.1.94:13000/isolate?password=xxxxx%28It>is >>> > working for me) >>> > >>> > http://192.168.1.94:13000/resume?password=xxxxx(it<http://192.168.1.94:13000/resume?password=xxxxx%28it>is >>> > working for me) >>> > >>> > http://192.168.1.94:13000/restart?password=xxxxx(it<http://192.168.1.94:13000/restart?password=xxxxx%28it>is >>> > working for me) >>> > >>> > http://192.168.1.94:13000/flush-dlr?password=xxxxx(it<http://192.168.1.94:13000/flush-dlr?password=xxxxx%28it>is >>> > working for me) >>> > >>> > http://192.168.1.94:13000/stop-smsc?password=xxxxx&smsc=xxxx(it<http://192.168.1.94:13000/stop-smsc?password=xxxxx&smsc=xxxx%28it>is >>> > working for me) >>> > >>> > http://192.168.1.94:13000/start-smsc?password=xxxxx&smsc=xxxx(it<http://192.168.1.94:13000/start-smsc?password=xxxxx&smsc=xxxx%28it>is >>> > working for me) >>> > >>> > http://192.168.1.94:13000/add-smsc?password=xxxxx (How to use this >>> with URL example ?) >>> > >>> > http://192.168.1.94:13000/remove-smsc?password=xxxxx (How to use this >>> with URL Example ?) >>> > >>> > http://192.168.1.94:13000/reload-lists?password=xxxxx (it is working >>> for me) >>> > >>> > >>> > Thanks and Regards, >>> > -- >>> > >>> > Kiran Reddy >>> > >>> > Network Admin/System Admin >>> > >>> > MPOWER Global Access India Pvt Ltd >>> > >>> > +91-9036971573 >>> > >>> > [email protected] >>> > >>> > http://www.mpowerglobal.in >>> > >>> > http://www.pushsms.in >>> > >>> > Bangalore, India >>> > >>> > >>> >>> >> >
