Nikos, Thanks a lot for your reply. The init-strings I have used are the 'Init1' and 'Init2' values of 'wvdialconf' file. And the following lines are displayed when the bearerbox starts.
DEBUG: AT2[/dev/ttyUSB0]: --> AT+CNMI=1,2,0,1,0^M DEBUG: AT2[/dev/ttyUSB0]: <-- OK Can't I use the above method for finding the init-string because I am having trouble finding the modem manual? ________________________________ From: Nikos Balkanas <[email protected]> To: mpl li <[email protected]>; [email protected] Sent: Sun, March 7, 2010 9:32:56 PM Subject: Re: Re : Kannel Configuration to set up an SMS gateway Hi, You need to configure AT+CNMI in your init-string. That tells your modem what to do with incoming SMS. It is modem specific and should consult your modem manual or manufacturer for it. BR, Nikos ----- Original Message ----- >From: mpl li >To: [email protected] >Sent: Sunday, March 07, 2010 5:35 >PM >Subject: Re: Re : Kannel Configuration to > set up an SMS gateway > > >Kidi > Kidi, >Thank you very much for your quick reply. Can you also help me with > the SMS receiving problem. > > > > ________________________________ From: Kidi Kidi <[email protected]> >To: mpl li <[email protected]> >Sent: Sun, March 7, 2010 7:38:42 > PM >Subject: Re : Kannel > Configuration to set up an SMS gateway > > >For me this happens whenever my sim card has > run out of units. So buy Mobile >(Prepaid Recharge) > Card to try. > > > > > ________________________________ From : mpl li > <[email protected]> >To : > [email protected] >Sent : Dim 7 > Mars 2010, 13 h 23 min 46 s >Subject > : Kannel Configuration to set up an SMS gateway > > >Dear All, >I am trying to configure Kannel to send and receive SMS > using a Huawei E156G USB modem. I have 2 questions. > >(1) When an SMS is > sent to the modem though the modem receives the SMS but Kannel does not > detect > it. nothing is recorded in the log files. Is this because of an error in the > specified get-url, or some other error in configuration parameters? > >(2) > I was able to send SMSs for a while but now even though the message > "Accepted > for Delivery" is displayed the following error occurs > >DEBUG: re-queing > SMS not-yet-to-be resent >DEBUG: sms_router: time to sleep 30.00 > secs. >DEBUG: AT2[/dev/ttyUSB0]: <-- +CMS ERROR: 500 >ERROR: > AT2[/dev/ttyUSB0]: CMS ERROR: +CMS ERROR: 500 >ERROR: AT2[/dev/ttyUSB0]: CMS > ERROR: Unknown error. -> maybe Sim storage is full? I'll have a look at it. > (500) >DEBUG: sms_router: gwlist_len = 1 >DEBUG: sms_router: handling > message (0x97cf278 vs 0x97cf278) >DEBUG: re-queing SMS not-yet-to-be > resent >DEBUG: sms_router: handling message (0x97cf278 vs > 0x97cf278) > >I am very new to all this and have read the user guide and > also other posts in the mailing list, but cannot find a solution. Any help > will be greatly appreciated. Below is my configuration > file. > >#--------------------------------------------- ># > CORE ># >group = core >admin-port = 13000 >smsbox-port = > 13001 >admin-password = bar >box-deny-ip = "*.*.*.*" >box-allow-ip = > "127.0.0.1" >#--------------------------------------------- ># SMSC > CONNECTIONS ># >group = smsc >smsc = > at >modemtype=auto >device=/dev/ttyUSB0 >my-number=+947xxxxxxxx >port > = 10000 >connect-allow-ip = 127.0.0.1 >log-level = > 0 >#--------------------------------------------- ># SMSBOX > SETUP ># >group = smsbox >bearerbox-host = 127.0.0.1 >sendsms-port = > 13013 >global-sender = +947xxxxxxxx >log-level = > 0 >#--------------------------------------------- ># SEND-SMS > USERS ># >group = sendsms-user >username = tester >password = > foobar >concatenation= true >max-messages = > 10 >#--------------------------------------------- ># > SERVICES ># >group = sms-service >keyword-regex = .* >catch-all = > yes >max-messages = 0 >get-url = "http://localhost/sms?phone=%p&text=%a"; > >group > = sms-service >keyword = default >text = "No service > specified" >#--------------------------------------------- ># > MODEMS ># >group = modems >id = huawei >name = > "Huawei" >detect-string = "huawei" >detect-string2 = "e156" >init-string > = "ATZ" >init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 > +FCLASS=0" >message-storage = > "SM" > > > > > > > > >
