Hi, As Nikos said I went through the modems.conf file. According to the init-string I found in the wvdialconf file, the modem I am using has the same init-string as the following group in the examples. I am not clear on how to include the AT+CNMI in to this. Should I replace this init-string with something in the form of "AT+CNMI=3,1,0,0". I would be very grateful if anyone help me with this.
________________________________ From: Nikos Balkanas <[email protected]> To: mpl li <[email protected]>; [email protected] Sent: Mon, March 8, 2010 1:29:20 PM Subject: Re: Re : Kannel Configuration to set up an SMS gateway Hi, In your configuration you have only init-string without AT+CNMI. Kannel doesn't understand init1 or init2, just a single init-string. For examples how to use it see modems.conf. Wvdialconf should be fine. BR, Nikos ----- Original Message ----- >From: mpl li >To: Nikos Balkanas ; [email protected] >Sent: Monday, March 08, 2010 2:29 >AM >Subject: Re: Re : Kannel Configuration to > set up an SMS gateway > > >Nikos, >Thanks a lot for your reply. >The init-strings I have used > are the 'Init1' and 'Init2' values of 'wvdialconf' file. And the > following lines are displayed when the bearerbox starts. > >DEBUG: > AT2[/dev/ttyUSB0]: --> AT+CNMI=1,2,0,1,0^M >DEBUG: AT2[/dev/ttyUSB0]: > <-- OK > >Can't I use the above method for finding the init-string > because I am having trouble finding the modem manual? > > > ________________________________ From: Nikos Balkanas > <[email protected]> >To: mpl li <[email protected]>; > [email protected] >Sent: Sun, > March 7, 2010 9:32:56 PM >Subject: Re: Re : Kannel Configuration to > set up an SMS gateway > > > >Hi, > >You need to configure AT+CNMI in your init-string. That > tells your modem what to do with incoming SMS. It is modem specific and > should > consult your modem manual or manufacturer for it. > >BR, >Nikos >----- >> Original Message ----- >>From: mpl li >>To: [email protected] >>Sent: >> Sunday, March 07, 2010 5:35 PM >>Subject: >> Re: Re : Kannel Configuration to set up an SMS gateway >> >> >>Kidi >> Kidi, >>Thank you very much for your quick reply. Can you also help me with >> the SMS receiving problem. >> >> >> >> ________________________________ From: Kidi Kidi <[email protected]> >>To: mpl li <[email protected]> >>Sent: Sun, March 7, 2010 7:38:42 >> PM >>Subject: Re : Kannel >> Configuration to set up an SMS gateway >> >> >>For me this happens whenever my sim card >> has run out of units. So buy Mobile >>(Prepaid Recharge) >> Card to try. >> >> >> >> >> ________________________________ From : mpl li >> <[email protected]> >>To >> : [email protected] >>Sent >> : Dim 7 Mars 2010, 13 h 23 min 46 s >>Subject : Kannel Configuration to set >> up an SMS gateway >> >> >>Dear All, >>I am trying to configure Kannel to send and receive SMS >> using a Huawei E156G USB modem. I have 2 questions. >> >>(1) When an SMS >> is sent to the modem though the modem receives the SMS but Kannel does >> not >> detect it. nothing is recorded in the log files. Is this because of an >> error >> in the specified get-url, or some other error in configuration >> parameters? >> >>(2) I was able to send SMSs for a while but now even >> though the message "Accepted for Delivery" is displayed the following >> error >> occurs >> >>DEBUG: re-queing SMS not-yet-to-be resent >>DEBUG: >> sms_router: time to sleep 30.00 secs. >>DEBUG: AT2[/dev/ttyUSB0]: <-- >> +CMS ERROR: 500 >>ERROR: AT2[/dev/ttyUSB0]: CMS ERROR: +CMS ERROR: >> 500 >>ERROR: AT2[/dev/ttyUSB0]: CMS ERROR: Unknown error. -> maybe Sim >> storage is full? I'll have a look at it. (500) >>DEBUG: sms_router: >> gwlist_len = 1 >>DEBUG: sms_router: handling message (0x97cf278 vs >> 0x97cf278) >>DEBUG: re-queing SMS not-yet-to-be resent >>DEBUG: >> sms_router: handling message (0x97cf278 vs 0x97cf278) >> >>I am very new >> to all this and have read the user guide and also other posts in the >> mailing >> list, but cannot find a solution. Any help will be greatly appreciated. >> Below is my configuration >> file. >> >>#--------------------------------------------- >># >> CORE >># >>group = core >>admin-port = 13000 >>smsbox-port = >> 13001 >>admin-password = bar >>box-deny-ip = "*.*.*.*" >>box-allow-ip = >> "127.0.0.1" >>#--------------------------------------------- >># SMSC >> CONNECTIONS >># >>group = smsc >>smsc = >> at >>modemtype=auto >>device=/dev/ttyUSB0 >>my-number=+947xxxxxxxx >>port >> = 10000 >>connect-allow-ip = 127.0.0.1 >>log-level = >> 0 >>#--------------------------------------------- >># SMSBOX >> SETUP >># >>group = smsbox >>bearerbox-host = 127.0.0.1 >>sendsms-port = >> 13013 >>global-sender = +947xxxxxxxx >>log-level = >> 0 >>#--------------------------------------------- >># SEND-SMS >> USERS >># >>group = sendsms-user >>username = tester >>password = >> foobar >>concatenation= true >>max-messages = >> 10 >>#--------------------------------------------- >># >> SERVICES >># >>group = sms-service >>keyword-regex = .* >>catch-all = >> yes >>max-messages = 0 >>get-url = "http://localhost/sms?phone=%p&text=%a"; >> >>group >> = sms-service >>keyword = default >>text = "No service >> specified" >>#--------------------------------------------- >># >> MODEMS >># >>group = modems >>id = huawei >>name = >> "Huawei" >>detect-string = "huawei" >>detect-string2 = >> "e156" >>init-string = "ATZ" >>init-string = "ATQ0 V1 E1 S0=0 &C1 >> &D2 +FCLASS=0" >>message-storage = >> "SM" >> >> >> >> >> >> >> >> >> >
