>From the logs you have sent I can't tell. I'd recommend re-submitting with full debug logs with information about what driver you are using (SMPP, AT, etc) and maybe someone can help.
>From what I can see you are looking in the smsbox logs - you have triggered a DLR (failure?) and you want the reason code to be submitted back your app? Just guessing here. Cheers, Alan Alberto Antillon wrote: > Alan, thanks for your response. I work with Sergio, we need to do it > on a per message basis so checking the logs it's not an option. Is > there another way? Thanks. > > Alan McNatty wrote: >> >> Hi Sergio, >> >> >> Is this a one-off problem or something you wish to do on a per >> message basis (on-going)? If it's for debugging only you could you >> run tcpdump or equivalent to capture raw traffic. Otherwise try >> setting log-level=0 in your kannel config and see if you can find the >> information you are after in the logs (or include the full logs in >> reply to the list for more help). >> >> >> HTH's, >> >> Alan >> >> >> Sergio Gallegos wrote: >> >>> Hi, >>> >>> i hope can u help me with this problem , i need recover the answer >>> of the operator , but i can't, the answer is of type message , the >>> log is this: >>> >>> 2010-04-23 13:17:20 [14852] [3] INFO: smsbox: Got HTTP request >>> </cgi-bin/sendsms> from <192.168.1.1> >>> 2010-04-23 13:17:20 [14852] [3] INFO: sendsms used by <outis> >>> 2010-04-23 13:17:20 [14852] [3] INFO: sendsms sender:(outis:XXXX> >>> (192.168.1.1) to:(111111> msg:( Respuesta desde la XXXX> >>> 2010-04-23 13:17:20 [14852] [4] INFO: Starting delivery report >>> <outis> from <XXXX> >>> 2010-04-23 13:17:26 [14852] [4] INFO: Starting to service <ID: 8c52c >>> STAT: false AUTH: 13> from <XXXX> to <111111> >>> >>> >>> >>> Needed sending to URL the value of AUTH , but i dont know how to. >>> >> >
