Hi Zak, Have you checked the init string? you can use wvdialconf from the command prompt to find out the inits string of your modem.
Are you able to send SMS using the AT commands. You can use minicom program. Cheers, Gjergji On Sun, Aug 29, 2010 at 10:32 AM, Zak <[email protected]> wrote: > Here's more log from kannel: > > > > > 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = <none>, > log_lvl = 0 > 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for > storage type. > 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal > 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile > `/usr/local/kannel/logs/kannel.log' with level `0'. > 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile > `/usr/local/kannel/logs/core_access.log'. > 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. > 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, > using default (100). > 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 > seconds. > 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. > 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id <modem> > disabled. > 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile > `/usr/local/kannel/logs/modem.log' with level `1'. > 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows > modemtype <Nokia> > 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition for > <Nokia> > 2010-08-28 21:28:41 [4145] [0] INFO: > ---------------------------------------- > 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 > starting > 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering mainloop > 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile > `/usr/local/kannel/logs/modem.log' with level `1'. > 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin > command received, shutting down... > 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads have died, killing > core > 2010-08-28 21:28:54 [4145] [0] INFO: Total WDP messages: received 0, sent 0 > 2010-08-28 21:28:54 [4145] [0] INFO: Total SMS messages: received 0, sent 0 > > > > -----Original Message----- > From: Nikos Balkanas <[email protected]> > To: [email protected]; Zak <[email protected]> > Sent: Sun, Aug 29, 2010 1:24 am > Subject: Re: Nokia N73 > > Please repost same logs at maximum detail. > > BR, > Nikos > ----- Original Message ----- From: Zak > To: [email protected] > Sent: Saturday, August 28, 2010 11:43 PM > Subject: Nokia N73 > > Hi All, > > I have a Nokia N73 that I could use to send SMS with minicom and also > managed to get the init string using wvdial. > > But not been able to use kannel to get it send or receive SMS. > > The log from kannel is below and it just keeps on openning and closing > device. > 2010-08-28 21:28:41 [4145] [6] INFO: AT2[modem]: opening device > 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: Logging in > 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: init device > 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: speed set to 460800 > 2010-08-28 21:28:43 [4145] [6] INFO: AT2[modem]: AT SMSC successfully > opened. > 2010-08-28 21:28:45 [4145] [6] INFO: AT2[modem]: Closing device > 2010-08-28 21:28:45 [4145] [6] ERROR: AT2[modem]: Couldn't connect > (retrying in 10 seconds). > > My modem config is: > > group = modems > id = Nokia > name = "Nokia" > detect-string = "Nokia Mobile Phones" > detect-string2 = "N93" > need-sleep = true > init-string="ATZ" > enable-mms = true > > and SMSC > > group = smsc > smsc = at > smsc-id = modem > modemtype = Nokia > device = /dev/ttyACM0 > speed = 460800 > sim-buffering = true > keepalive = 180 > idle-timeout = 160 > denied-prefix = "633;213;286;200;633;8001;277" > log-file = "/usr/local/kannel/logs/modem.log" > log-level=1 > > My wvdialconf file generated: > > [Dialer Defaults] > Modem = /dev/ttyACM0 > Baud = 460800 > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ISDN = 0 > Modem Type = USB Modem > ; Phone = <Target Phone Number> > ; Username = <Your Login Name> > ; Password = <Your Password> > > Any help appreciated. > > Thanks, > > Zak >
