Hello Zak, What's report 'AT+CNMI' command when using your mobile with minicom ?
My Nokia gives the following output (Nokia 6230) *AT+CNMI=? +CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1) OK* If your gives ERROR then I think you won't be able to use it with Kannel BR, Emmanuel 2010/8/30 Zak <xi...@netscape.net> > Hi All, > > Anyone at all who used a Nokia N93 or N95 or N97 that can share their > config with me? > > If the phones work on minicom and vwdial, am I correct to assume they > should work with kannel as well? but need the correct init string? > > > thanks, > > Zak > > > > > -----Original Message----- > From: Gjergji Guri <gjergji.g...@facilization.com> > To: Zak <xi...@netscape.net> > Cc: nbalka...@gmail.com; users@kannel.org > Sent: Sun, Aug 29, 2010 10:24 am > Subject: Re: Nokia N73 > > Hi Zak, > > Have you checked the init string? you can use wvdialconf from the > command prompt to find out the inits string of your modem. > > Are you able to send SMS using the AT commands. You can use minicom > program. > > Cheers, > Gjergji > > > > On Sun, Aug 29, 2010 at 10:32 AM, Zak <xi...@netscape.net> wrote: > >> Here's more log from kannel: >> >> >> >> >> 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = <none>, >> log_lvl = 0 >> 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for >> storage type. >> 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal >> 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile >> `/usr/local/kannel/logs/kannel.log' with level `0'. >> 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile >> `/usr/local/kannel/logs/core_access.log'. >> 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. >> 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, >> using default (100). >> 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 >> seconds. >> 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. >> 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id <modem> >> disabled. >> 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile >> `/usr/local/kannel/logs/modem.log' with level `1'. >> 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows >> modemtype <Nokia> >> 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition for >> <Nokia> >> 2010-08-28 21:28:41 [4145] [0] INFO: >> ---------------------------------------- >> 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 >> starting >> 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering >> mainloop >> 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile >> `/usr/local/kannel/logs/modem.log' with level `1'. >> 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin >> command received, shutting down... >> 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads have died, killing >> core >> 2010-08-28 21:28:54 [4145] [0] INFO: Total WDP messages: received 0, sent >> 0 >> 2010-08-28 21:28:54 [4145] [0] INFO: Total SMS messages: received 0, sent >> 0 >> >> >> >> -----Original Message----- >> From: Nikos Balkanas <nbalka...@gmail.com> >> To: users@kannel.org; Zak <xi...@netscape.net> >> Sent: Sun, Aug 29, 2010 1:24 am >> Subject: Re: Nokia N73 >> >> Please repost same logs at maximum detail. >> >> BR, >> Nikos >> ----- Original Message ----- From: Zak >> To: users@kannel.org >> Sent: Saturday, August 28, 2010 11:43 PM >> Subject: Nokia N73 >> >> Hi All, >> >> I have a Nokia N73 that I could use to send SMS with minicom and also >> managed to get the init string using wvdial. >> >> But not been able to use kannel to get it send or receive SMS. >> >> The log from kannel is below and it just keeps on openning and closing >> device. >> 2010-08-28 21:28:41 [4145] [6] INFO: AT2[modem]: opening device >> 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: Logging in >> 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: init device >> 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: speed set to 460800 >> 2010-08-28 21:28:43 [4145] [6] INFO: AT2[modem]: AT SMSC successfully >> opened. >> 2010-08-28 21:28:45 [4145] [6] INFO: AT2[modem]: Closing device >> 2010-08-28 21:28:45 [4145] [6] ERROR: AT2[modem]: Couldn't connect >> (retrying in 10 seconds). >> >> My modem config is: >> >> group = modems >> id = Nokia >> name = "Nokia" >> detect-string = "Nokia Mobile Phones" >> detect-string2 = "N93" >> need-sleep = true >> init-string="ATZ" >> enable-mms = true >> >> and SMSC >> >> group = smsc >> smsc = at >> smsc-id = modem >> modemtype = Nokia >> device = /dev/ttyACM0 >> speed = 460800 >> sim-buffering = true >> keepalive = 180 >> idle-timeout = 160 >> denied-prefix = "633;213;286;200;633;8001;277" >> log-file = "/usr/local/kannel/logs/modem.log" >> log-level=1 >> >> My wvdialconf file generated: >> >> [Dialer Defaults] >> Modem = /dev/ttyACM0 >> Baud = 460800 >> Init1 = ATZ >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> ISDN = 0 >> Modem Type = USB Modem >> ; Phone = <Target Phone Number> >> ; Username = <Your Login Name> >> ; Password = <Your Password> >> >> Any help appreciated. >> >> Thanks, >> >> Zak >> > >