Yes it works perfectly with Kannel for incoming and outgoing SMS. For yours as I said in a previous post for a N70:
*"For newer models of Nokia phones, e.g., N70, N80, the "+CNMI" is not supported, and you have no way of detecting incoming SMS." *from this url<http://webcache.googleusercontent.com/search?q=cache:ILAJeyI50cAJ:www.codeproject.com/KB/vb/phonesmsrecv.aspx+nokia+Nseries+at%2Bcnmi&cd=4&hl=fr&ct=clnk&gl=fr> * *I noticed that many nSeries phones does not support AT+CNMI command ie can not forward SMS to Kannel. Maybe someone can confirm this ? Regards, Emmanuel 2010/8/30 Zak <[email protected]> > Hi Emmanuel, > > Mine gives Error when I do AT+CNMI. > > Is your Nokia 6230 working fine for both sending/receiving SMS? > > > > > > > -----Original Message----- > From: Emmanuel CHANSON <[email protected]> > To: Zak <[email protected]> > Cc: [email protected]; [email protected] > Sent: Mon, Aug 30, 2010 11:19 am > Subject: Re: Nokia N73 > > Hello Zak, > > What's report 'AT+CNMI' command when using your mobile with minicom ? > > My Nokia gives the following output (Nokia 6230) > > *AT+CNMI=? > +CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1) > > OK* > > If your gives ERROR then I think you won't be able to use it with Kannel > > BR, > > Emmanuel > > 2010/8/30 Zak <[email protected]> > >> Hi All, >> >> Anyone at all who used a Nokia N93 or N95 or N97 that can share their >> config with me? >> >> If the phones work on minicom and vwdial, am I correct to assume they >> should work with kannel as well? but need the correct init string? >> >> >> thanks, >> >> Zak >> >> >> >> >> -----Original Message----- >> From: Gjergji Guri <[email protected]> >> To: Zak <[email protected]> >> Cc: [email protected]; [email protected] >> Sent: Sun, Aug 29, 2010 10:24 am >> Subject: Re: Nokia N73 >> >> Hi Zak, >> >> Have you checked the init string? you can use wvdialconf from the >> command prompt to find out the inits string of your modem. >> >> Are you able to send SMS using the AT commands. You can use minicom >> program. >> >> Cheers, >> Gjergji >> >> >> >> On Sun, Aug 29, 2010 at 10:32 AM, Zak <[email protected]> wrote: >> >>> Here's more log from kannel: >>> >>> >>> >>> >>> 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = <none>, >>> log_lvl = 0 >>> 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for >>> storage type. >>> 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal >>> 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile >>> `/usr/local/kannel/logs/kannel.log' with level `0'. >>> 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile >>> `/usr/local/kannel/logs/core_access.log'. >>> 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. >>> 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, >>> using default (100). >>> 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 >>> seconds. >>> 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. >>> 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id <modem> >>> disabled. >>> 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile >>> `/usr/local/kannel/logs/modem.log' with level `1'. >>> 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows >>> modemtype <Nokia> >>> 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition >>> for <Nokia> >>> 2010-08-28 21:28:41 [4145] [0] INFO: >>> ---------------------------------------- >>> 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 >>> starting >>> 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering >>> mainloop >>> 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile >>> `/usr/local/kannel/logs/modem.log' with level `1'. >>> 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin >>> command received, shutting down... >>> 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads have died, killing >>> core >>> 2010-08-28 21:28:54 [4145] [0] INFO: Total WDP messages: received 0, sent >>> 0 >>> 2010-08-28 21:28:54 [4145] [0] INFO: Total SMS messages: received 0, sent >>> 0 >>> >>> >>> >>> -----Original Message----- >>> From: Nikos Balkanas <[email protected]> >>> To: [email protected]; Zak <[email protected]> >>> Sent: Sun, Aug 29, 2010 1:24 am >>> Subject: Re: Nokia N73 >>> >>> Please repost same logs at maximum detail. >>> >>> BR, >>> Nikos >>> ----- Original Message ----- From: Zak >>> To: [email protected] >>> Sent: Saturday, August 28, 2010 11:43 PM >>> Subject: Nokia N73 >>> >>> Hi All, >>> >>> I have a Nokia N73 that I could use to send SMS with minicom and also >>> managed to get the init string using wvdial. >>> >>> But not been able to use kannel to get it send or receive SMS. >>> >>> The log from kannel is below and it just keeps on openning and closing >>> device. >>> 2010-08-28 21:28:41 [4145] [6] INFO: AT2[modem]: opening device >>> 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: Logging in >>> 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: init device >>> 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: speed set to 460800 >>> 2010-08-28 21:28:43 [4145] [6] INFO: AT2[modem]: AT SMSC successfully >>> opened. >>> 2010-08-28 21:28:45 [4145] [6] INFO: AT2[modem]: Closing device >>> 2010-08-28 21:28:45 [4145] [6] ERROR: AT2[modem]: Couldn't connect >>> (retrying in 10 seconds). >>> >>> My modem config is: >>> >>> group = modems >>> id = Nokia >>> name = "Nokia" >>> detect-string = "Nokia Mobile Phones" >>> detect-string2 = "N93" >>> need-sleep = true >>> init-string="ATZ" >>> enable-mms = true >>> >>> and SMSC >>> >>> group = smsc >>> smsc = at >>> smsc-id = modem >>> modemtype = Nokia >>> device = /dev/ttyACM0 >>> speed = 460800 >>> sim-buffering = true >>> keepalive = 180 >>> idle-timeout = 160 >>> denied-prefix = "633;213;286;200;633;8001;277" >>> log-file = "/usr/local/kannel/logs/modem.log" >>> log-level=1 >>> >>> My wvdialconf file generated: >>> >>> [Dialer Defaults] >>> Modem = /dev/ttyACM0 >>> Baud = 460800 >>> Init1 = ATZ >>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>> ISDN = 0 >>> Modem Type = USB Modem >>> ; Phone = <Target Phone Number> >>> ; Username = <Your Login Name> >>> ; Password = <Your Password> >>> >>> Any help appreciated. >>> >>> Thanks, >>> >>> Zak >>> >> >> >
