Please include modems.conf in your configuration file, as described in UG.
BR,
Nikos
----- Original Message -----
From: "Martin" <[email protected]>
To: <[email protected]>
Sent: Wednesday, October 06, 2010 6:59 PM
Subject: AW: Siemens TC35i built in coM.sat ISDN Plus 2
Hi!
The main problem is that kannel or bearerbox is asking for the modem
definitions which I don’t have
Logfile bearerbox.log:
2010-10-06 17:42:07 [3517] [6] DEBUG: AT2[/dev/ttyS1]: device opened
2010-10-06 17:42:07 [3517] [6] INFO: AT2[/dev/ttyS1]: speed set to 19200
2010-10-06 17:42:07 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ^M
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> AT^M
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> AT&F^M
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ATE0^M
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ATI^M
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- coM.s.a.t. ISDN
Plus, Version 4.3.5
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 17:42:09 [3517] [6] PANIC: Where are the modem definitions ?!?!
2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox(gw_panic+0x101)
[0x80c60f1]
2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x8064ffb]
2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x806b3d5]
2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x80bd3b0]
kannel.conf:
group = smsc
smsc = at
modemtype = auto
device = /dev/ttyS1
speed = 19200
I know from the manufacture that I can send a sms via terminal with
at$smssend=<channel>,”<number>”,”<text>”<enter>
for example: at$smssend=1,”+43660303030”,”Hello here I am!”
regards
Martin
-----Ursprόngliche Nachricht-----
Von: Alvaro Cornejo [mailto:[email protected]]
Gesendet: Mittwoch, 06. Oktober 2010 16:56
An: Martin
Cc: [email protected]
Betreff: Re: Siemens TC35i built in coM.sat ISDN Plus 2
Kannel uses "drivers" to talk to smsc's. The main drivers it has is
SMPP and AT commands. If your modem suports it you just need to
configure kannel with the specific driver for your equipment.
The TC35 is(was?) a serial modem. So you should be able to connect to
it with the AT driver. However I don't know how do you phisically
conect to the device. Kannel AT driver uses dev/ttyxxx for defining
the output physical port; therefore you need to verify that your OS
does map each modem to a dev/ttyxxx sp you can configure that device
in kannel.
Hope helps
Alvaro
|---------------------------------------------------------------------------
--------------------------------------|
Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Wed, Oct 6, 2010 at 6:04 AM, Martin <[email protected]> wrote:
Hello!
I΄ve a little problem to get kannel work on my debian.
I΄ve a coM.sat ISDN Plus 2 which have two TC35i built in, I only wanna use
channel 1 with one sim card. I΄ve tested the comsat device with the
software
originally shipped with and especially sms works fine. So now I don’t have
any idea how I can get it to work with kannel – maybe someone of you can
help me!
German information about the comsat device can be found at
http://www.comsat.de/DE/GSM-Gateway/ISDN/ISDN-Plus-2-Kanal.htm
Regards Martin
