Hi! Thank you for your help, I created the modems.conf and I setup the config but it seems that the TC35 won't work because there is a manager for the two TC35i in the box and it handle the AT commands to the specified channel so I think it's very hard for me to get the box running because my linux skills are medium but hardware skill especially for SMSC are nearly zero. With minicom a can "talk" to the gateway but that doesn't help me. If someone else have any idea which can help me please send it :)
Logfile: 2010-10-06 18:24:45 [5363] [6] INFO: AT2[/dev/ttyS1]: opening device 2010-10-06 18:24:45 [5363] [6] DEBUG: AT2[/dev/ttyS1]: device opened 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: device opened 2010-10-06 18:24:46 [5363] [6] INFO: AT2[/dev/ttyS1]: init device 2010-10-06 18:24:46 [5363] [6] INFO: AT2[/dev/ttyS1]: speed set to 19200 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> ATZ^M 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT^M 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT&F^M 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> ATE0^M 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT\Q3^M 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CPIN?^M 2010-10-06 18:24:47 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK 2010-10-06 18:24:56 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- ERROR 2010-10-06 18:24:56 [5363] [6] ERROR: AT2[/dev/ttyS1]: Generic error: ERROR 2010-10-06 18:24:56 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CPIN?^M 2010-10-06 18:24:57 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK 2010-10-06 18:24:57 [5363] [6] ERROR: AT2[/dev/ttyS1]: Opening failed. Terminating 2010-10-06 18:24:57 [5363] [6] INFO: AT2[/dev/ttyS1]: closing device On this comsat device I dont need a PIN because its already configured so the comsat device "manager" setup the two Siemens modems so I can talk to them without any need of a PIN or something like that. Regards Martin -----Ursprüngliche Nachricht----- Von: Alvaro Cornejo [mailto:[email protected]] Gesendet: Mittwoch, 06. Oktober 2010 18:14 An: Martin Cc: [email protected] Betreff: Re: Siemens TC35i built in coM.sat ISDN Plus 2 Search the lists for an available siemens modem definition. There is also an example in the source code. You should add it to your kannel config file. Regarding the command from the manufacturer, Kannel does not support it. It uses standard AT commands. You should check if your modem supports it. if not you will have to develop your own driver. Regards Alvaro |--------------------------------------------------------------------------- --------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com On Wed, Oct 6, 2010 at 10:59 AM, Martin <[email protected]> wrote: > Hi! > The main problem is that kannel or bearerbox is asking for the modem > definitions which I dont have > > Logfile bearerbox.log: > 2010-10-06 17:42:07 [3517] [6] DEBUG: AT2[/dev/ttyS1]: device opened > 2010-10-06 17:42:07 [3517] [6] INFO: AT2[/dev/ttyS1]: speed set to 19200 > 2010-10-06 17:42:07 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ^M > 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> AT^M > 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> AT&F^M > 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ATE0^M > 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ATI^M > 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- coM.s.a.t. ISDN > Plus, Version 4.3.5 > 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 17:42:09 [3517] [6] PANIC: Where are the modem definitions ?!?! > 2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox(gw_panic+0x101) > [0x80c60f1] > 2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x8064ffb] > 2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x806b3d5] > 2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x80bd3b0] > > kannel.conf: > group = smsc > smsc = at > modemtype = auto > device = /dev/ttyS1 > speed = 19200 > > I know from the manufacture that I can send a sms via terminal with > at$smssend=<channel>,<number>,<text><enter> > > for example: at$smssend=1,+43660303030,Hello here I am! > > regards > Martin > > > -----Ursprüngliche Nachricht----- > Von: Alvaro Cornejo [mailto:[email protected]] > Gesendet: Mittwoch, 06. Oktober 2010 16:56 > An: Martin > Cc: [email protected] > Betreff: Re: Siemens TC35i built in coM.sat ISDN Plus 2 > > Kannel uses "drivers" to talk to smsc's. The main drivers it has is > SMPP and AT commands. If your modem suports it you just need to > configure kannel with the specific driver for your equipment. > > The TC35 is(was?) a serial modem. So you should be able to connect to > it with the AT driver. However I don't know how do you phisically > conect to the device. Kannel AT driver uses dev/ttyxxx for defining > the output physical port; therefore you need to verify that your OS > does map each modem to a dev/ttyxxx sp you can configure that device > in kannel. > > Hope helps > > Alvaro > > > |--------------------------------------------------------------------------- > --------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > SMS y GPRS online > Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com > > > > On Wed, Oct 6, 2010 at 6:04 AM, Martin <[email protected]> wrote: >> Hello! >> >> >> >> I´ve a little problem to get kannel work on my debian. >> >> I´ve a coM.sat ISDN Plus 2 which have two TC35i built in, I only wanna use >> channel 1 with one sim card. I´ve tested the comsat device with the > software >> originally shipped with and especially sms works fine. So now I dont have >> any idea how I can get it to work with kannel maybe someone of you can >> help me! >> >> >> >> German information about the comsat device can be found at >> http://www.comsat.de/DE/GSM-Gateway/ISDN/ISDN-Plus-2-Kanal.htm >> >> >> >> Regards Martin >> >> > > >
