Martin For the error you get with the modem use CMEE=1 or 2 to have the modem display detailed error message.
About smsbox not showing/running: kannel is composed of 3 programs: bearerbox, smsbox and wapbox. All 3 uses the same config file but need to be run separately: bearerbox path/kannel.conf [A must. must be the first to be executed] smsbox. path/kannel.conf [http interface. needs bearerbox running] wapbox path/kannel.conf [only needed for wap messaging. Needs bearerbox running] Check the manual for running options and details Regards Alvaro |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com On Wed, Oct 6, 2010 at 3:48 PM, Martin <[email protected]> wrote: > Thanks you very much, Alvaro Cornejo, for the hint about the PIN which is > now disabled and I think I've configured nearly everything I need. > But if I understand kannel correct I should be able to connect to the > sendsms-port via browser (IE, FF, ...) > But the port won't be opened when I look with netstat on the kannel host I > only see > admin-port = 13000 and smsbox-port = 13011 tcp and 9200 and 9201 as udp are > open > > Logfile: > 2010-10-06 22:17:39 [3242] [6] INFO: AT2[/dev/ttyS1]: opening device > 2010-10-06 22:17:39 [3242] [6] DEBUG: AT2[/dev/ttyS1]: device opened > 2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: device opened > 2010-10-06 22:17:40 [3242] [6] INFO: AT2[/dev/ttyS1]: init device > 2010-10-06 22:17:40 [3242] [6] INFO: AT2[/dev/ttyS1]: speed set to 19200 > 2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> ATZ^M > 2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> AT^M > 2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> AT&F^M > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> ATE0^M > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> AT\Q3^M > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CMGF=0^M > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CSMS=?^M > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> > AT+CNMI=1,2,0,1,1^M > 2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK > 2010-10-06 22:17:41 [3242] [6] INFO: AT2[/dev/ttyS1]: AT SMSC successfully > opened. > 2010-10-06 22:17:51 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- ERROR > 2010-10-06 22:17:51 [3242] [6] ERROR: AT2[/dev/ttyS1]: Generic error: ERROR > > Kannel.conf > > group = core > admin-port = 13000 > admin-password = pwd > admin-deny-ip = "" > admin-allow-ip = "*.*.*.*" > smsbox-port = 13011 > wdp-interface-name = "*" > log-file = "/var/log/kannel/bearerbox.log" > box-deny-ip = "" > box-allow-ip = "*.*.*.*" > > group = smsc > smsc = at > modemtype = siemens-tc35 > device = /dev/ttyS1 > speed = 19200 > > group = smsbox > bearerbox-host = localhost > sendsms-port = 13013 > sendsms-chars = "0123456789 " > access-log = "kannel.access" > log-file = "smsbox.log" > log-level = 0 > > group = sendsms-user > username = sms > password = pwd4sms > > group = modems > id = siemens_tc35 > name = "Siemens TC35" > detect-string = "coM" > init-string = "AT+CNMI=1,2,0,1,1" > speed = 19200 > no-pin = true > enable-hwhs = "AT\\Q3" > need-sleep = true > > regards > Martin > > -----Ursprüngliche Nachricht----- > Von: Alvaro Cornejo [mailto:[email protected]] > Gesendet: Mittwoch, 06. Oktober 2010 19:30 > An: Martin > Cc: [email protected] > Betreff: Re: Siemens TC35i built in coM.sat ISDN Plus 2 > > By your logs, it seems kannel can communicate with one of your modems > directly. > > Check userguide. There is a config parameter to disable the use of the PIN. > > As it seems you are connecting directly to one of the modems test to > set a the pin value in kannel config. > > Hope helps > > Regards > > Alvaro > > |--------------------------------------------------------------------------- > --------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > SMS y GPRS online > Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com > > > > On Wed, Oct 6, 2010 at 11:48 AM, Martin <[email protected]> wrote: >> Hi! >> >> Thank you for your help, I created the modems.conf and I setup the config >> but it seems that the TC35 won't work because there is a manager for the > two >> TC35i in the box and it handle the AT commands to the specified channel so > I >> think it's very hard for me to get the box running because my linux skills >> are medium but hardware skill especially for SMSC are nearly zero. With >> minicom a can "talk" to the gateway but that doesn't help me. >> If someone else have any idea which can help me please send it :) >> >> Logfile: >> 2010-10-06 18:24:45 [5363] [6] INFO: AT2[/dev/ttyS1]: opening device >> 2010-10-06 18:24:45 [5363] [6] DEBUG: AT2[/dev/ttyS1]: device opened >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: device opened >> 2010-10-06 18:24:46 [5363] [6] INFO: AT2[/dev/ttyS1]: init device >> 2010-10-06 18:24:46 [5363] [6] INFO: AT2[/dev/ttyS1]: speed set to 19200 >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> ATZ^M >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT^M >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT&F^M >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> ATE0^M >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT\Q3^M >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >> 2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CPIN?^M >> 2010-10-06 18:24:47 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >> 2010-10-06 18:24:56 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- ERROR >> 2010-10-06 18:24:56 [5363] [6] ERROR: AT2[/dev/ttyS1]: Generic error: > ERROR >> 2010-10-06 18:24:56 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CPIN?^M >> 2010-10-06 18:24:57 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >> 2010-10-06 18:24:57 [5363] [6] ERROR: AT2[/dev/ttyS1]: Opening failed. >> Terminating >> 2010-10-06 18:24:57 [5363] [6] INFO: AT2[/dev/ttyS1]: closing device >> >> On this comsat device I don’t need a PIN because its already configured so >> the comsat device "manager" setup the two Siemens modems so I can talk to >> them without any need of a PIN or something like that. >> >> Regards Martin >> >> >> >> -----Ursprüngliche Nachricht----- >> Von: Alvaro Cornejo [mailto:[email protected]] >> Gesendet: Mittwoch, 06. Oktober 2010 18:14 >> An: Martin >> Cc: [email protected] >> Betreff: Re: Siemens TC35i built in coM.sat ISDN Plus 2 >> >> Search the lists for an available siemens modem definition. There is >> also an example in the source code. You should add it to your kannel >> config file. >> >> Regarding the command from the manufacturer, Kannel does not support >> it. It uses standard AT commands. You should check if your modem >> supports it. if not you will have to develop your own driver. >> >> Regards >> >> Alvaro >> >> >> > |--------------------------------------------------------------------------- >> --------------------------------------| >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >> celular y Nextel >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >> SMS y GPRS online >> Visitenos en www.perusms.NET www.smsglobal.com.mx y >> www.pravcom.com >> >> >> >> On Wed, Oct 6, 2010 at 10:59 AM, Martin <[email protected]> wrote: >>> Hi! >>> The main problem is that kannel or bearerbox is asking for the modem >>> definitions which I don’t have >>> >>> Logfile bearerbox.log: >>> 2010-10-06 17:42:07 [3517] [6] DEBUG: AT2[/dev/ttyS1]: device opened >>> 2010-10-06 17:42:07 [3517] [6] INFO: AT2[/dev/ttyS1]: speed set to 19200 >>> 2010-10-06 17:42:07 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ^M >>> 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> AT^M >>> 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >>> 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> AT&F^M >>> 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >>> 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ATE0^M >>> 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >>> 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ATI^M >>> 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- coM.s.a.t. > ISDN >>> Plus, Version 4.3.5 >>> 2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK >>> 2010-10-06 17:42:09 [3517] [6] PANIC: Where are the modem definitions > ?!?! >>> 2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox(gw_panic+0x101) >>> [0x80c60f1] >>> 2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x8064ffb] >>> 2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x806b3d5] >>> 2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x80bd3b0] >>> >>> kannel.conf: >>> group = smsc >>> smsc = at >>> modemtype = auto >>> device = /dev/ttyS1 >>> speed = 19200 >>> >>> I know from the manufacture that I can send a sms via terminal with >>> at$smssend=<channel>,”<number>”,”<text>”<enter> >>> >>> for example: at$smssend=1,”+43660303030”,”Hello here I am!” >>> >>> regards >>> Martin >>> >>> >>> -----Ursprüngliche Nachricht----- >>> Von: Alvaro Cornejo [mailto:[email protected]] >>> Gesendet: Mittwoch, 06. Oktober 2010 16:56 >>> An: Martin >>> Cc: [email protected] >>> Betreff: Re: Siemens TC35i built in coM.sat ISDN Plus 2 >>> >>> Kannel uses "drivers" to talk to smsc's. The main drivers it has is >>> SMPP and AT commands. If your modem suports it you just need to >>> configure kannel with the specific driver for your equipment. >>> >>> The TC35 is(was?) a serial modem. So you should be able to connect to >>> it with the AT driver. However I don't know how do you phisically >>> conect to the device. Kannel AT driver uses dev/ttyxxx for defining >>> the output physical port; therefore you need to verify that your OS >>> does map each modem to a dev/ttyxxx sp you can configure that device >>> in kannel. >>> >>> Hope helps >>> >>> Alvaro >>> >>> >>> >> > |--------------------------------------------------------------------------- >>> --------------------------------------| >>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >>> celular y Nextel >>> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >>> SMS y GPRS online >>> Visitenos en www.perusms.NET www.smsglobal.com.mx y >>> www.pravcom.com >>> >>> >>> >>> On Wed, Oct 6, 2010 at 6:04 AM, Martin <[email protected]> wrote: >>>> Hello! >>>> >>>> >>>> >>>> I´ve a little problem to get kannel work on my debian. >>>> >>>> I´ve a coM.sat ISDN Plus 2 which have two TC35i built in, I only wanna >> use >>>> channel 1 with one sim card. I´ve tested the comsat device with the >>> software >>>> originally shipped with and especially sms works fine. So now I don’t >> have >>>> any idea how I can get it to work with kannel – maybe someone of you can >>>> help me! >>>> >>>> >>>> >>>> German information about the comsat device can be found at >>>> http://www.comsat.de/DE/GSM-Gateway/ISDN/ISDN-Plus-2-Kanal.htm >>>> >>>> >>>> >>>> Regards Martin >>>> >>>> >>> >>> >>> >> >> >> > >
