Hi, with NULL MODEL cable ( not "crossover' ;-) ) root@work1:/home/mickael# wvdialconf Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://open.nit.ca/wiki/?WvDial If you still have problems, send mail to <[email protected]>. root@work1:/home/mickael# Mickael 2011/2/16 Alvaro Cornejo <[email protected]> > Did you test wvdialconf commad what did you got? > > Are you talking about an ethernet crossover cable? you should use a > NULL MODEM cable since it is a serial device. > > Regards > > Alvaro > > |-----------------------------------------------------------------------------------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > SMS y GPRS online > Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com > > > > On Wed, Feb 16, 2011 at 12:34 PM, becoco <[email protected]> wrote: > > Hello, > > I tried to a crosserover cable... does not functions them :-( > > > > 2011/2/15 Alvaro Cornejo <[email protected]> > >> > >> Hi > >> > >> try with > >> > >> # wvdialconfig > >> > >> This will search for all active ports and test different speeds. If it > >> does not found anything, it might be a problem with the cable or the > >> modem itself. > >> > >> Hope helps > >> > >> Alvaro > >> > >> > |-----------------------------------------------------------------------------------------------------------------| > >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > >> celular y Nextel > >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > >> SMS y GPRS online > >> Visitenos en www.perusms.NET www.smsglobal.com.mx y > >> www.pravcom.com > >> > >> > >> > >> On Tue, Feb 15, 2011 at 4:31 PM, becoco <[email protected]> wrote: > >> > Hello Alvaro, > >> > > >> > With ttyS1 | ttyS2 | ttsyS3 i have: > >> > > >> > 2011-02-15 17:52:00 [2495] [6] INFO: AT2[/dev/ttyS1]: trying to use > >> > speed > >> > <9600> from modem definition > >> > 2011-02-15 17:52:00 [2495] [6] INFO: AT2[/dev/ttyS1]: opening device > >> > 2011-02-15 17:52:00 [2495] [6] DEBUG: AT2[/dev/ttyS1]: device opened. > >> > Telnet > >> > mode = 0 > >> > 2011-02-15 17:52:00 [2495] [6] ERROR: AT2[/dev/ttyS1]: at_data_link: > >> > fail to > >> > set termios attribute > >> > 2011-02-15 17:52:00 [2495] [6] ERROR: System error 5: Input/output > error > >> > 2011-02-15 17:52:00 [2495] [6] DEBUG: AT2[/dev/ttyS1]: device opened > >> > 2011-02-15 17:52:00 [2495] [6] ERROR: AT2[/dev/ttyS1]: at_data_link: > >> > fail to > >> > set termios attribute > >> > 2011-02-15 17:52:00 [2495] [6] ERROR: System error 5: Input/output > error > >> > 2011-02-15 17:52:00 [2495] [6] INFO: AT2[/dev/ttyS1]: speed set to > 9600 > >> > 2011-02-15 17:52:00 [2495] [6] DEBUG: AT2[/dev/ttyS1]: --> ^M > >> > 2011-02-15 17:52:00 [2495] [6] ERROR: AT2[/dev/ttyS1]: Couldnot write > to > >> > device. > >> > 2011-02-15 17:52:00 [2495] [6] ERROR: System error 5: Input/output > error > >> > > >> > so I think it ttyS0, the motherboard has more than 1 port R232... > >> > > >> > My cable is new... I buy a cable DB9 type "extension" (female side > >> > motherboard, Nokia male side) it's correct ?? > >> > > >> > Mickael > >> > > >> > 2011/2/15 Alvaro Cornejo <[email protected]> > >> >> > >> >> There is no answer from the modem to kannel... maybe your modem is > >> >> connected to a port different from /dev/ttyS0... or you are using the > >> >> wrong cable... > >> >> > >> >> Also try with different speeds or use wvdial to find out the correct > >> >> port > >> >> config > >> >> > >> >> Regards > >> >> > >> >> > >> >> > >> >> > |-----------------------------------------------------------------------------------------------------------------| > >> >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde > cualquier > >> >> celular y Nextel > >> >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias > via > >> >> SMS y GPRS online > >> >> Visitenos en www.perusms.NET www.smsglobal.com.mx y > >> >> www.pravcom.com > >> >> > >> >> > >> >> > >> >> On Tue, Feb 15, 2011 at 12:44 PM, becoco <[email protected]> wrote: > >> >> > Hi all, > >> >> > I can not connect the Nokia 22 has kannel :-( > >> >> > Here's my config : > >> >> > > >> >> > # modem > >> >> > group = smsc > >> >> > smsc = at > >> >> > modemtype = premicell > >> >> > device = /dev/ttyS0 > >> >> > > >> >> > group = modems > >> >> > id = premicell > >> >> > name = Premicell > >> >> > detect-string = "PREMICEL" > >> >> > no-pin = true > >> >> > no-smsc = true > >> >> > > >> >> > My log: > >> >> > > >> >> > 2011-02-15 17:57:57 [3040] [0] INFO: > >> >> > ---------------------------------------- > >> >> > 2011-02-15 17:57:57 [3040] [0] INFO: Kannel bearerbox II version > >> >> > 1.4.3 > >> >> > starting > >> >> > 2011-02-15 17:57:57 [3040] [0] INFO: MAIN: Start-up done, entering > >> >> > mainloop > >> >> > 2011-02-15 17:57:57 [3040] [0] DEBUG: AT2[/dev/ttyS0]: start called > >> >> > 2011-02-15 17:57:57 [3040] [9] DEBUG: Thread 9 > >> >> > (gw/bb_udp.c:udp_sender) > >> >> > maps > >> >> > to pid 3040. > >> >> > 2011-02-15 17:57:57 [3040] [10] DEBUG: Thread 10 > >> >> > (gw/bb_udp.c:udp_receiver) > >> >> > maps to pid 3040. > >> >> > 2011-02-15 17:57:57 [3040] [8] DEBUG: Thread 8 > >> >> > (gw/bb_udp.c:udp_receiver) > >> >> > maps to pid 3040. > >> >> > 2011-02-15 17:57:57 [3040] [11] DEBUG: Thread 11 > >> >> > (gw/bb_udp.c:udp_sender) > >> >> > maps to pid 3040. > >> >> > 2011-02-15 17:57:57 [3040] [7] DEBUG: Thread 7 > >> >> > (gw/bb_smscconn.c:sms_router) > >> >> > maps to pid 3040. > >> >> > 2011-02-15 17:57:57 [3040] [12] DEBUG: Thread 12 > >> >> > (gw/bb_boxc.c:wdp_to_wapboxes) maps to pid 3040. > >> >> > 2011-02-15 17:57:57 [3040] [13] DEBUG: Thread 13 > >> >> > (gw/bb_boxc.c:wapboxc_run) > >> >> > maps to pid 3040. > >> >> > 2011-02-15 17:57:57 [3040] [14] DEBUG: Thread 14 > >> >> > (gw/bearerbox.c:wdp_router) > >> >> > maps to pid 3040. > >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: Thread 6 > >> >> > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 3040. > >> >> > 2011-02-15 17:57:57 [3040] [6] INFO: AT2[/dev/ttyS0]: trying to use > >> >> > speed > >> >> > <9600> from modem definition > >> >> > 2011-02-15 17:57:57 [3040] [6] INFO: AT2[/dev/ttyS0]: opening > device > >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: AT2[/dev/ttyS0]: device > opened. > >> >> > Telnet > >> >> > mode = 0 > >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: AT2[/dev/ttyS0]: device > opened > >> >> > 2011-02-15 17:57:57 [3040] [6] INFO: AT2[/dev/ttyS0]: speed set to > >> >> > 9600 > >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M > >> >> > 2011-02-15 17:57:58 [3040] [13] INFO: Client connected from > >> >> > <127.0.0.1> > >> >> > 2011-02-15 17:57:58 [3040] [13] DEBUG: Started thread 15 > >> >> > (gw/bb_boxc.c:function) > >> >> > 2011-02-15 17:57:58 [3040] [15] DEBUG: Thread 15 > >> >> > (gw/bb_boxc.c:function) > >> >> > maps to pid 3040. > >> >> > 2011-02-15 17:57:58 [3040] [15] DEBUG: setting up systems for new > >> >> > wapbox > >> >> > 2011-02-15 17:57:58 [3040] [15] DEBUG: Started thread 16 > >> >> > (gw/bb_boxc.c:boxc_sender) > >> >> > 2011-02-15 17:57:58 [3040] [16] DEBUG: Thread 16 > >> >> > (gw/bb_boxc.c:boxc_sender) > >> >> > maps to pid 3040. > >> >> > 2011-02-15 17:57:58 [3040] [5] INFO: Client connected from > >> >> > <127.0.0.1> > >> >> > 2011-02-15 17:57:58 [3040] [5] DEBUG: Started thread 17 > >> >> > (gw/bb_boxc.c:function) > >> >> > 2011-02-15 17:57:58 [3040] [17] DEBUG: Thread 17 > >> >> > (gw/bb_boxc.c:function) > >> >> > maps to pid 3040. > >> >> > 2011-02-15 17:57:58 [3040] [17] DEBUG: Started thread 18 > >> >> > (gw/bb_boxc.c:boxc_sender) > >> >> > 2011-02-15 17:57:58 [3040] [18] DEBUG: Thread 18 > >> >> > (gw/bb_boxc.c:boxc_sender) > >> >> > maps to pid 3040. > >> >> > 2011-02-15 17:57:59 [3040] [2] DEBUG: HTTP: Creating HTTPClient for > >> >> > `192.168.1.4'. > >> >> > 2011-02-15 17:57:59 [3040] [2] DEBUG: HTTP: Created HTTPClient area > >> >> > 0x91a62f0. > >> >> > 2011-02-15 17:57:59 [3040] [3] DEBUG: HTTP: Resetting HTTPClient > for > >> >> > `192.168.1.4'. > >> >> > 2011-02-15 17:58:59 [3040] [1] DEBUG: Timeout for fd:52 appeares. > >> >> > 2011-02-15 17:58:59 [3040] [1] DEBUG: HTTP: Destroying HTTPClient > >> >> > area > >> >> > 0x91a62f0. > >> >> > > >> >> > > >> >> > my status page: > >> >> > > >> >> > SMSC connections: > >> >> > unknown AT2[/dev/ttyS0] (connecting, rcvd 0, sent 0, failed > 0, > >> >> > queued > >> >> > 0 msgs) > >> >> > > >> >> > > >> >> > Please help, > >> >> > Mickael > >> > > >> > > > > > >
