Hi! I have new information. It should be connected with a standard cable, but you must activate the "*data mode*".
see : http://www.mail-archive.com/[email protected]/msg00507.html using the *3282# in handset > to turn the modem AT mode(RS232). I want to save the modem in RS232 > mode. > > I can not change the configuration for the modem to start in "data" and not in a "voice". You need a RJ11 cable (trunk) to DB9/RS232 (PC) that it is impossible to buy ... Mickael. 2011/2/17 Alvaro Cornejo <[email protected]> > Seems your modem is not correctly connected to the kannel box > > as is a serial modem, it shouldn't be a driver issue like if it was a > usb modem. The only thing mitght be the cable or your modem does not > support serial connections... > > have you tried in another machine? windows/linux? > > > > |-----------------------------------------------------------------------------------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > SMS y GPRS online > Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com > > > > On Wed, Feb 16, 2011 at 5:18 PM, becoco <[email protected]> wrote: > > Hi, > > with NULL MODEL cable ( not "crossover' ;-) ) > > > > root@work1:/home/mickael# wvdialconf > > Editing `/etc/wvdial.conf'. > > > > Scanning your serial ports for a modem. > > > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > > Modem Port Scan<*1>: S1 S2 S3 > > > > > > Sorry, no modem was detected! Is it in use by another program? > > Did you configure it properly with setserial? > > > > Please read the FAQ at http://open.nit.ca/wiki/?WvDial > > > > If you still have problems, send mail to <[email protected]>. > > root@work1:/home/mickael# > > > > Mickael > > > > > > 2011/2/16 Alvaro Cornejo <[email protected]> > >> > >> Did you test wvdialconf commad what did you got? > >> > >> Are you talking about an ethernet crossover cable? you should use a > >> NULL MODEM cable since it is a serial device. > >> > >> Regards > >> > >> Alvaro > >> > >> > |-----------------------------------------------------------------------------------------------------------------| > >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > >> celular y Nextel > >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > >> SMS y GPRS online > >> Visitenos en www.perusms.NET www.smsglobal.com.mx y > >> www.pravcom.com > >> > >> > >> > >> On Wed, Feb 16, 2011 at 12:34 PM, becoco <[email protected]> wrote: > >> > Hello, > >> > I tried to a crosserover cable... does not functions them :-( > >> > > >> > 2011/2/15 Alvaro Cornejo <[email protected]> > >> >> > >> >> Hi > >> >> > >> >> try with > >> >> > >> >> # wvdialconfig > >> >> > >> >> This will search for all active ports and test different speeds. If > it > >> >> does not found anything, it might be a problem with the cable or the > >> >> modem itself. > >> >> > >> >> Hope helps > >> >> > >> >> Alvaro > >> >> > >> >> > >> >> > |-----------------------------------------------------------------------------------------------------------------| > >> >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde > cualquier > >> >> celular y Nextel > >> >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias > via > >> >> SMS y GPRS online > >> >> Visitenos en www.perusms.NET www.smsglobal.com.mx y > >> >> www.pravcom.com > >> >> > >> >> > >> >> > >> >> On Tue, Feb 15, 2011 at 4:31 PM, becoco <[email protected]> wrote: > >> >> > Hello Alvaro, > >> >> > > >> >> > With ttyS1 | ttyS2 | ttsyS3 i have: > >> >> > > >> >> > 2011-02-15 17:52:00 [2495] [6] INFO: AT2[/dev/ttyS1]: trying to use > >> >> > speed > >> >> > <9600> from modem definition > >> >> > 2011-02-15 17:52:00 [2495] [6] INFO: AT2[/dev/ttyS1]: opening > device > >> >> > 2011-02-15 17:52:00 [2495] [6] DEBUG: AT2[/dev/ttyS1]: device > opened. > >> >> > Telnet > >> >> > mode = 0 > >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: AT2[/dev/ttyS1]: > at_data_link: > >> >> > fail to > >> >> > set termios attribute > >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: System error 5: Input/output > >> >> > error > >> >> > 2011-02-15 17:52:00 [2495] [6] DEBUG: AT2[/dev/ttyS1]: device > opened > >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: AT2[/dev/ttyS1]: > at_data_link: > >> >> > fail to > >> >> > set termios attribute > >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: System error 5: Input/output > >> >> > error > >> >> > 2011-02-15 17:52:00 [2495] [6] INFO: AT2[/dev/ttyS1]: speed set to > >> >> > 9600 > >> >> > 2011-02-15 17:52:00 [2495] [6] DEBUG: AT2[/dev/ttyS1]: --> ^M > >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: AT2[/dev/ttyS1]: Couldnot > write > >> >> > to > >> >> > device. > >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: System error 5: Input/output > >> >> > error > >> >> > > >> >> > so I think it ttyS0, the motherboard has more than 1 port R232... > >> >> > > >> >> > My cable is new... I buy a cable DB9 type "extension" (female side > >> >> > motherboard, Nokia male side) it's correct ?? > >> >> > > >> >> > Mickael > >> >> > > >> >> > 2011/2/15 Alvaro Cornejo <[email protected]> > >> >> >> > >> >> >> There is no answer from the modem to kannel... maybe your modem is > >> >> >> connected to a port different from /dev/ttyS0... or you are using > >> >> >> the > >> >> >> wrong cable... > >> >> >> > >> >> >> Also try with different speeds or use wvdial to find out the > correct > >> >> >> port > >> >> >> config > >> >> >> > >> >> >> Regards > >> >> >> > >> >> >> > >> >> >> > >> >> >> > >> >> >> > |-----------------------------------------------------------------------------------------------------------------| > >> >> >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde > >> >> >> cualquier > >> >> >> celular y Nextel > >> >> >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias > >> >> >> via > >> >> >> SMS y GPRS online > >> >> >> Visitenos en www.perusms.NET www.smsglobal.com.mx y > >> >> >> www.pravcom.com > >> >> >> > >> >> >> > >> >> >> > >> >> >> On Tue, Feb 15, 2011 at 12:44 PM, becoco <[email protected]> > wrote: > >> >> >> > Hi all, > >> >> >> > I can not connect the Nokia 22 has kannel :-( > >> >> >> > Here's my config : > >> >> >> > > >> >> >> > # modem > >> >> >> > group = smsc > >> >> >> > smsc = at > >> >> >> > modemtype = premicell > >> >> >> > device = /dev/ttyS0 > >> >> >> > > >> >> >> > group = modems > >> >> >> > id = premicell > >> >> >> > name = Premicell > >> >> >> > detect-string = "PREMICEL" > >> >> >> > no-pin = true > >> >> >> > no-smsc = true > >> >> >> > > >> >> >> > My log: > >> >> >> > > >> >> >> > 2011-02-15 17:57:57 [3040] [0] INFO: > >> >> >> > ---------------------------------------- > >> >> >> > 2011-02-15 17:57:57 [3040] [0] INFO: Kannel bearerbox II version > >> >> >> > 1.4.3 > >> >> >> > starting > >> >> >> > 2011-02-15 17:57:57 [3040] [0] INFO: MAIN: Start-up done, > entering > >> >> >> > mainloop > >> >> >> > 2011-02-15 17:57:57 [3040] [0] DEBUG: AT2[/dev/ttyS0]: start > >> >> >> > called > >> >> >> > 2011-02-15 17:57:57 [3040] [9] DEBUG: Thread 9 > >> >> >> > (gw/bb_udp.c:udp_sender) > >> >> >> > maps > >> >> >> > to pid 3040. > >> >> >> > 2011-02-15 17:57:57 [3040] [10] DEBUG: Thread 10 > >> >> >> > (gw/bb_udp.c:udp_receiver) > >> >> >> > maps to pid 3040. > >> >> >> > 2011-02-15 17:57:57 [3040] [8] DEBUG: Thread 8 > >> >> >> > (gw/bb_udp.c:udp_receiver) > >> >> >> > maps to pid 3040. > >> >> >> > 2011-02-15 17:57:57 [3040] [11] DEBUG: Thread 11 > >> >> >> > (gw/bb_udp.c:udp_sender) > >> >> >> > maps to pid 3040. > >> >> >> > 2011-02-15 17:57:57 [3040] [7] DEBUG: Thread 7 > >> >> >> > (gw/bb_smscconn.c:sms_router) > >> >> >> > maps to pid 3040. > >> >> >> > 2011-02-15 17:57:57 [3040] [12] DEBUG: Thread 12 > >> >> >> > (gw/bb_boxc.c:wdp_to_wapboxes) maps to pid 3040. > >> >> >> > 2011-02-15 17:57:57 [3040] [13] DEBUG: Thread 13 > >> >> >> > (gw/bb_boxc.c:wapboxc_run) > >> >> >> > maps to pid 3040. > >> >> >> > 2011-02-15 17:57:57 [3040] [14] DEBUG: Thread 14 > >> >> >> > (gw/bearerbox.c:wdp_router) > >> >> >> > maps to pid 3040. > >> >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: Thread 6 > >> >> >> > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 3040. > >> >> >> > 2011-02-15 17:57:57 [3040] [6] INFO: AT2[/dev/ttyS0]: trying to > >> >> >> > use > >> >> >> > speed > >> >> >> > <9600> from modem definition > >> >> >> > 2011-02-15 17:57:57 [3040] [6] INFO: AT2[/dev/ttyS0]: opening > >> >> >> > device > >> >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: AT2[/dev/ttyS0]: device > >> >> >> > opened. > >> >> >> > Telnet > >> >> >> > mode = 0 > >> >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: AT2[/dev/ttyS0]: device > >> >> >> > opened > >> >> >> > 2011-02-15 17:57:57 [3040] [6] INFO: AT2[/dev/ttyS0]: speed set > to > >> >> >> > 9600 > >> >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M > >> >> >> > 2011-02-15 17:57:58 [3040] [13] INFO: Client connected from > >> >> >> > <127.0.0.1> > >> >> >> > 2011-02-15 17:57:58 [3040] [13] DEBUG: Started thread 15 > >> >> >> > (gw/bb_boxc.c:function) > >> >> >> > 2011-02-15 17:57:58 [3040] [15] DEBUG: Thread 15 > >> >> >> > (gw/bb_boxc.c:function) > >> >> >> > maps to pid 3040. > >> >> >> > 2011-02-15 17:57:58 [3040] [15] DEBUG: setting up systems for > new > >> >> >> > wapbox > >> >> >> > 2011-02-15 17:57:58 [3040] [15] DEBUG: Started thread 16 > >> >> >> > (gw/bb_boxc.c:boxc_sender) > >> >> >> > 2011-02-15 17:57:58 [3040] [16] DEBUG: Thread 16 > >> >> >> > (gw/bb_boxc.c:boxc_sender) > >> >> >> > maps to pid 3040. > >> >> >> > 2011-02-15 17:57:58 [3040] [5] INFO: Client connected from > >> >> >> > <127.0.0.1> > >> >> >> > 2011-02-15 17:57:58 [3040] [5] DEBUG: Started thread 17 > >> >> >> > (gw/bb_boxc.c:function) > >> >> >> > 2011-02-15 17:57:58 [3040] [17] DEBUG: Thread 17 > >> >> >> > (gw/bb_boxc.c:function) > >> >> >> > maps to pid 3040. > >> >> >> > 2011-02-15 17:57:58 [3040] [17] DEBUG: Started thread 18 > >> >> >> > (gw/bb_boxc.c:boxc_sender) > >> >> >> > 2011-02-15 17:57:58 [3040] [18] DEBUG: Thread 18 > >> >> >> > (gw/bb_boxc.c:boxc_sender) > >> >> >> > maps to pid 3040. > >> >> >> > 2011-02-15 17:57:59 [3040] [2] DEBUG: HTTP: Creating HTTPClient > >> >> >> > for > >> >> >> > `192.168.1.4'. > >> >> >> > 2011-02-15 17:57:59 [3040] [2] DEBUG: HTTP: Created HTTPClient > >> >> >> > area > >> >> >> > 0x91a62f0. > >> >> >> > 2011-02-15 17:57:59 [3040] [3] DEBUG: HTTP: Resetting HTTPClient > >> >> >> > for > >> >> >> > `192.168.1.4'. > >> >> >> > 2011-02-15 17:58:59 [3040] [1] DEBUG: Timeout for fd:52 > appeares. > >> >> >> > 2011-02-15 17:58:59 [3040] [1] DEBUG: HTTP: Destroying > HTTPClient > >> >> >> > area > >> >> >> > 0x91a62f0. > >> >> >> > > >> >> >> > > >> >> >> > my status page: > >> >> >> > > >> >> >> > SMSC connections: > >> >> >> > unknown AT2[/dev/ttyS0] (connecting, rcvd 0, sent 0, > failed > >> >> >> > 0, > >> >> >> > queued > >> >> >> > 0 msgs) > >> >> >> > > >> >> >> > > >> >> >> > Please help, > >> >> >> > Mickael > >> >> > > >> >> > > >> > > >> > > > > > >
