Seems your modem is not correctly connected to the kannel box as is a serial modem, it shouldn't be a driver issue like if it was a usb modem. The only thing mitght be the cable or your modem does not support serial connections...
have you tried in another machine? windows/linux? |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com On Wed, Feb 16, 2011 at 5:18 PM, becoco <[email protected]> wrote: > Hi, > with NULL MODEL cable ( not "crossover' ;-) ) > > root@work1:/home/mickael# wvdialconf > Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > Modem Port Scan<*1>: S1 S2 S3 > > > Sorry, no modem was detected! Is it in use by another program? > Did you configure it properly with setserial? > > Please read the FAQ at http://open.nit.ca/wiki/?WvDial > > If you still have problems, send mail to <[email protected]>. > root@work1:/home/mickael# > > Mickael > > > 2011/2/16 Alvaro Cornejo <[email protected]> >> >> Did you test wvdialconf commad what did you got? >> >> Are you talking about an ethernet crossover cable? you should use a >> NULL MODEM cable since it is a serial device. >> >> Regards >> >> Alvaro >> >> |-----------------------------------------------------------------------------------------------------------------| >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >> celular y Nextel >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >> SMS y GPRS online >> Visitenos en www.perusms.NET www.smsglobal.com.mx y >> www.pravcom.com >> >> >> >> On Wed, Feb 16, 2011 at 12:34 PM, becoco <[email protected]> wrote: >> > Hello, >> > I tried to a crosserover cable... does not functions them :-( >> > >> > 2011/2/15 Alvaro Cornejo <[email protected]> >> >> >> >> Hi >> >> >> >> try with >> >> >> >> # wvdialconfig >> >> >> >> This will search for all active ports and test different speeds. If it >> >> does not found anything, it might be a problem with the cable or the >> >> modem itself. >> >> >> >> Hope helps >> >> >> >> Alvaro >> >> >> >> >> >> |-----------------------------------------------------------------------------------------------------------------| >> >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >> >> celular y Nextel >> >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >> >> SMS y GPRS online >> >> Visitenos en www.perusms.NET www.smsglobal.com.mx y >> >> www.pravcom.com >> >> >> >> >> >> >> >> On Tue, Feb 15, 2011 at 4:31 PM, becoco <[email protected]> wrote: >> >> > Hello Alvaro, >> >> > >> >> > With ttyS1 | ttyS2 | ttsyS3 i have: >> >> > >> >> > 2011-02-15 17:52:00 [2495] [6] INFO: AT2[/dev/ttyS1]: trying to use >> >> > speed >> >> > <9600> from modem definition >> >> > 2011-02-15 17:52:00 [2495] [6] INFO: AT2[/dev/ttyS1]: opening device >> >> > 2011-02-15 17:52:00 [2495] [6] DEBUG: AT2[/dev/ttyS1]: device opened. >> >> > Telnet >> >> > mode = 0 >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: AT2[/dev/ttyS1]: at_data_link: >> >> > fail to >> >> > set termios attribute >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: System error 5: Input/output >> >> > error >> >> > 2011-02-15 17:52:00 [2495] [6] DEBUG: AT2[/dev/ttyS1]: device opened >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: AT2[/dev/ttyS1]: at_data_link: >> >> > fail to >> >> > set termios attribute >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: System error 5: Input/output >> >> > error >> >> > 2011-02-15 17:52:00 [2495] [6] INFO: AT2[/dev/ttyS1]: speed set to >> >> > 9600 >> >> > 2011-02-15 17:52:00 [2495] [6] DEBUG: AT2[/dev/ttyS1]: --> ^M >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: AT2[/dev/ttyS1]: Couldnot write >> >> > to >> >> > device. >> >> > 2011-02-15 17:52:00 [2495] [6] ERROR: System error 5: Input/output >> >> > error >> >> > >> >> > so I think it ttyS0, the motherboard has more than 1 port R232... >> >> > >> >> > My cable is new... I buy a cable DB9 type "extension" (female side >> >> > motherboard, Nokia male side) it's correct ?? >> >> > >> >> > Mickael >> >> > >> >> > 2011/2/15 Alvaro Cornejo <[email protected]> >> >> >> >> >> >> There is no answer from the modem to kannel... maybe your modem is >> >> >> connected to a port different from /dev/ttyS0... or you are using >> >> >> the >> >> >> wrong cable... >> >> >> >> >> >> Also try with different speeds or use wvdial to find out the correct >> >> >> port >> >> >> config >> >> >> >> >> >> Regards >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> |-----------------------------------------------------------------------------------------------------------------| >> >> >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde >> >> >> cualquier >> >> >> celular y Nextel >> >> >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias >> >> >> via >> >> >> SMS y GPRS online >> >> >> Visitenos en www.perusms.NET www.smsglobal.com.mx y >> >> >> www.pravcom.com >> >> >> >> >> >> >> >> >> >> >> >> On Tue, Feb 15, 2011 at 12:44 PM, becoco <[email protected]> wrote: >> >> >> > Hi all, >> >> >> > I can not connect the Nokia 22 has kannel :-( >> >> >> > Here's my config : >> >> >> > >> >> >> > # modem >> >> >> > group = smsc >> >> >> > smsc = at >> >> >> > modemtype = premicell >> >> >> > device = /dev/ttyS0 >> >> >> > >> >> >> > group = modems >> >> >> > id = premicell >> >> >> > name = Premicell >> >> >> > detect-string = "PREMICEL" >> >> >> > no-pin = true >> >> >> > no-smsc = true >> >> >> > >> >> >> > My log: >> >> >> > >> >> >> > 2011-02-15 17:57:57 [3040] [0] INFO: >> >> >> > ---------------------------------------- >> >> >> > 2011-02-15 17:57:57 [3040] [0] INFO: Kannel bearerbox II version >> >> >> > 1.4.3 >> >> >> > starting >> >> >> > 2011-02-15 17:57:57 [3040] [0] INFO: MAIN: Start-up done, entering >> >> >> > mainloop >> >> >> > 2011-02-15 17:57:57 [3040] [0] DEBUG: AT2[/dev/ttyS0]: start >> >> >> > called >> >> >> > 2011-02-15 17:57:57 [3040] [9] DEBUG: Thread 9 >> >> >> > (gw/bb_udp.c:udp_sender) >> >> >> > maps >> >> >> > to pid 3040. >> >> >> > 2011-02-15 17:57:57 [3040] [10] DEBUG: Thread 10 >> >> >> > (gw/bb_udp.c:udp_receiver) >> >> >> > maps to pid 3040. >> >> >> > 2011-02-15 17:57:57 [3040] [8] DEBUG: Thread 8 >> >> >> > (gw/bb_udp.c:udp_receiver) >> >> >> > maps to pid 3040. >> >> >> > 2011-02-15 17:57:57 [3040] [11] DEBUG: Thread 11 >> >> >> > (gw/bb_udp.c:udp_sender) >> >> >> > maps to pid 3040. >> >> >> > 2011-02-15 17:57:57 [3040] [7] DEBUG: Thread 7 >> >> >> > (gw/bb_smscconn.c:sms_router) >> >> >> > maps to pid 3040. >> >> >> > 2011-02-15 17:57:57 [3040] [12] DEBUG: Thread 12 >> >> >> > (gw/bb_boxc.c:wdp_to_wapboxes) maps to pid 3040. >> >> >> > 2011-02-15 17:57:57 [3040] [13] DEBUG: Thread 13 >> >> >> > (gw/bb_boxc.c:wapboxc_run) >> >> >> > maps to pid 3040. >> >> >> > 2011-02-15 17:57:57 [3040] [14] DEBUG: Thread 14 >> >> >> > (gw/bearerbox.c:wdp_router) >> >> >> > maps to pid 3040. >> >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: Thread 6 >> >> >> > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 3040. >> >> >> > 2011-02-15 17:57:57 [3040] [6] INFO: AT2[/dev/ttyS0]: trying to >> >> >> > use >> >> >> > speed >> >> >> > <9600> from modem definition >> >> >> > 2011-02-15 17:57:57 [3040] [6] INFO: AT2[/dev/ttyS0]: opening >> >> >> > device >> >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: AT2[/dev/ttyS0]: device >> >> >> > opened. >> >> >> > Telnet >> >> >> > mode = 0 >> >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: AT2[/dev/ttyS0]: device >> >> >> > opened >> >> >> > 2011-02-15 17:57:57 [3040] [6] INFO: AT2[/dev/ttyS0]: speed set to >> >> >> > 9600 >> >> >> > 2011-02-15 17:57:57 [3040] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M >> >> >> > 2011-02-15 17:57:58 [3040] [13] INFO: Client connected from >> >> >> > <127.0.0.1> >> >> >> > 2011-02-15 17:57:58 [3040] [13] DEBUG: Started thread 15 >> >> >> > (gw/bb_boxc.c:function) >> >> >> > 2011-02-15 17:57:58 [3040] [15] DEBUG: Thread 15 >> >> >> > (gw/bb_boxc.c:function) >> >> >> > maps to pid 3040. >> >> >> > 2011-02-15 17:57:58 [3040] [15] DEBUG: setting up systems for new >> >> >> > wapbox >> >> >> > 2011-02-15 17:57:58 [3040] [15] DEBUG: Started thread 16 >> >> >> > (gw/bb_boxc.c:boxc_sender) >> >> >> > 2011-02-15 17:57:58 [3040] [16] DEBUG: Thread 16 >> >> >> > (gw/bb_boxc.c:boxc_sender) >> >> >> > maps to pid 3040. >> >> >> > 2011-02-15 17:57:58 [3040] [5] INFO: Client connected from >> >> >> > <127.0.0.1> >> >> >> > 2011-02-15 17:57:58 [3040] [5] DEBUG: Started thread 17 >> >> >> > (gw/bb_boxc.c:function) >> >> >> > 2011-02-15 17:57:58 [3040] [17] DEBUG: Thread 17 >> >> >> > (gw/bb_boxc.c:function) >> >> >> > maps to pid 3040. >> >> >> > 2011-02-15 17:57:58 [3040] [17] DEBUG: Started thread 18 >> >> >> > (gw/bb_boxc.c:boxc_sender) >> >> >> > 2011-02-15 17:57:58 [3040] [18] DEBUG: Thread 18 >> >> >> > (gw/bb_boxc.c:boxc_sender) >> >> >> > maps to pid 3040. >> >> >> > 2011-02-15 17:57:59 [3040] [2] DEBUG: HTTP: Creating HTTPClient >> >> >> > for >> >> >> > `192.168.1.4'. >> >> >> > 2011-02-15 17:57:59 [3040] [2] DEBUG: HTTP: Created HTTPClient >> >> >> > area >> >> >> > 0x91a62f0. >> >> >> > 2011-02-15 17:57:59 [3040] [3] DEBUG: HTTP: Resetting HTTPClient >> >> >> > for >> >> >> > `192.168.1.4'. >> >> >> > 2011-02-15 17:58:59 [3040] [1] DEBUG: Timeout for fd:52 appeares. >> >> >> > 2011-02-15 17:58:59 [3040] [1] DEBUG: HTTP: Destroying HTTPClient >> >> >> > area >> >> >> > 0x91a62f0. >> >> >> > >> >> >> > >> >> >> > my status page: >> >> >> > >> >> >> > SMSC connections: >> >> >> > unknown AT2[/dev/ttyS0] (connecting, rcvd 0, sent 0, failed >> >> >> > 0, >> >> >> > queued >> >> >> > 0 msgs) >> >> >> > >> >> >> > >> >> >> > Please help, >> >> >> > Mickael >> >> > >> >> > >> > >> > > >
