Hi Rene,
The command "AT+CMGF=0" gives me an "OK" message. Regards, Joey ________________________________ From: Rene Kluwen [mailto:[email protected]] Sent: Friday, May 25, 2012 12:58 PM To: Joey Rampersad; 'Alvaro Cornejo' Cc: [email protected] Subject: RE: SMSC Reject Is the modem initialized with AT+CMGF=0? Or does that line give an error message? From: Joey Rampersad [mailto:[email protected]] Sent: Friday, 25 May, 2012 18:25 To: Alvaro Cornejo; Rene Kluwen Cc: [email protected] Subject: RE: SMSC Reject Hi Alvaro, I have set my modem log to debug and got the following error messages occurring (This is just a summary): 1. 2012-05-08 09:06:42 [615] [6] ERROR: AT2[SMS1]: could not decode PDU to a message. 2. 2012-05-25 08:01:58 [621] [6] ERROR: AT2[SMS1]: got +CMT but waiting for next line timed out 3. 2012-05-25 08:09:17 [621] [6] ERROR: AT2[SMS1]: Generic error: ERROR 4. 2012-05-25 11:31:34 [621] [6] ERROR: AT2[SMS1]: got +CMT but pdu_extract failed 5. 2012-05-25 11:31:34 [621] [6] ERROR: AT2[SMS1]: CMTI notification received, but no message found in memory! 6. 2012-05-25 11:31:34 [621] [6] ERROR: System error 1: Operation not permitted Error message number 3 ("Generic error: ERROR") occur the most and I believe this is the message I get when the SMSC rejects messages. This is my config: group = smsc smsc = at smsc-id = SMS1 modemtype = wavecom device=/dev/ttyS1 speed = 115200 group = modems id = wavecom name = Wavecom detect-string = "WAVECOM" Any help would be greatly appreciated. Regards Joey -----Original Message----- From: Alvaro Cornejo [mailto:[email protected]] Sent: Friday, May 04, 2012 5:39 PM To: Rene Kluwen Cc: Joey Rampersad; [email protected] Subject: Re: SMSC Reject Hi Never tried. I use the following setup and never had a problem with the modem rejecting the messages. Kannel had always followed modem speed... Maybe when using message-storage=ME. group = smsc smsc = at smsc-id = mo4 modemtype = "Enfora" speed = 115200 log-level = 0 log-file = "/var/log/kannel/x2p6_mo4.log" allowed-smsc-id = mo4;mo sim-buffering = true keepalive = 60 max-error-count = 8 group = modems id = Enfora name = Enfora detect-string = "Enfora " init-string = AT+CNMI=2,1,2,1,0; +CMEE=2; +CSAS; +CGMR message-storage = SM keepalive-cmd = AT+CSQ;+CMEE=2;+CSCS="8859-1" reset-string = AT$RESET need-sleep = true Else a log might show if the error comes from his carrier and not the modem... Joey: can you set your modem log to debug and post it here? Regards Alvaro |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com On Fri, May 4, 2012 at 4:06 PM, Rene Kluwen <[email protected]> wrote: > Just a question. Is it possible to set the throughput config option for smsc > = at? > > == Rene > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf > Of Alvaro Cornejo > Sent: Friday, 04 May, 2012 21:03 > To: Joey Rampersad > Cc: [email protected] > Subject: Re: SMSC Reject > > Hi > > A gsm modem is usually not able to send more than about 1msg each 5-8 > sec. so I assume your modem is storing messages in its internal > memory. Once it is full it start rejecting messages. So you should > give some time to the modem to send sms to carrier before submitting > more messages. > > Hope helps > > Alvaro > > > > |--------------------------------------------------------------------------- > --------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > SMS y GPRS online > Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com > > > On Fri, May 4, 2012 at 1:43 PM, Joey Rampersad > <[email protected]> wrote: >> Hi, does anyone know if Kannel has a limit to the number of messages it >> sends per minute or am I restricted by my SMSC? >> >> >> >> My problem: >> >> >> >> While Kannel receives 6 messages per minute and sends them out, after a >> while the SMSC (A Multi-Tech MultiModem) starts returning "16: smsc > reject" >> and after I reboot the Kannel system messages starts going out again and > the >> SMSC returns "8: smsc submit". > > >
