I added as shown in the configuration section of modems below. The same generic errors i get from bearerbox... # Huawei E220 #It should be changed to work for your mobile group = modems id = huawei_e220 name = "Huawei_E220" detect-string = "huawei" #init-string = "ATZ" #init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" init-string = "AT+CMEE=1" #init-string = "AT+CNMI=1,2,0,0,1" #init-string = "AT+CNMI=2,1,2,2,0" message-storage=sm speed=9600
> Date: Mon, 25 Jun 2012 12:35:13 -0500 > Subject: Re: Huawei E220 Generic error: ERROR - Initialization of device > failed. > From: [email protected] > To: [email protected] > CC: [email protected] > > can you add "+CMEE=1" or "+CMEE=2" to your modem init string? It might > give you more detail on "generic error" message. > > Regards > > Alvaro > > On 6/25/12, vouk voukam voukam <[email protected]> wrote: > > > > I gave full access to USB01 chmod 777 /dev/ttyUSB0 and to /devttyUSB1The > > same error occurs > >> Date: Mon, 25 Jun 2012 10:39:49 -0500 > >> Subject: Re: Huawei E220 Generic error: ERROR - Initialization of device > >> failed. > >> From: [email protected] > >> To: [email protected] > >> CC: [email protected] > >> > >> check read/write permissions for kannel user into /dev/ttyUSB01 > >> > >> Regards > >> > >> Alvaro > >> > >> On 6/25/12, vouk voukam voukam <[email protected]> wrote: > >> > > >> > I want to setup Kannel in my Ubuntu machine. I have a Huawei e220 modem > >> > which is equipped with a SIM card and i have tested through minicom. It > >> > can > >> > successfully reads and sends SMS messages to phone numbers.This is my > >> > configuration: > >> > > >> > group = core admin-port = 13002 smsbox-port = 13003 > >> > admin-password = bar box-deny-ip = "*.*.*.*" box-allow-ip = > >> > "127.0.0.1" group = smsc smsc = at modemtype = huawei > >> > device > >> > = /dev/ttyUSB1 my-number = number sms-center = number #SIM Number > >> > my-number = number #SIM Number log-level = 1 group = > >> > modems > >> > id = huawei_e220 name = "Huawei_E220" detect-string = "huawei" > >> > init-string = "ATZ" init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 > >> > +FCLASS=0" > >> > message-storage=sm speed=9600 group = smsbox > >> > bearerbox-host > >> > = 127.0.0.1 sendsms-port = 13013 global-sender = numberThe > >> > init-strings have been taken from /etc/wvdial.confwhen i am starting > >> > bearerbox it seems that it is not starting correctly: > >> > 2012-06-25 16:56:36 [8531] [6] ERROR: AT2[Huawei-e220]: Initialization > >> > of > >> > device failed.2012-06-25 16:56:36 [8531] [6] INFO: AT2[Huawei-e220]: > >> > Closing > >> > device2012-06-25 16:56:36 [8531] [6] ERROR: AT2[Huawei-e220]: Couldn't > >> > connect (retrying in 10 seconds).2012-06-25 16:56:46 [8531] [6] INFO: > >> > AT2[Huawei-e220]: opening device2012-06-25 16:56:46 [8531] [6] INFO: > >> > AT2[Huawei-e220]: Logging in2012-06-25 16:56:46 [8531] [6] INFO: > >> > AT2[Huawei-e220]: init device2012-06-25 16:56:46 [8531] [6] INFO: > >> > AT2[Huawei-e220]: speed set to 1152002012-06-25 16:56:47 [8531] [6] > >> > ERROR: > >> > AT2[Huawei-e220]: Generic error: ERROR2012-06-25 16:56:47 [8531] [6] > >> > ERROR: > >> > AT2[Huawei-e220]: Initialization of device failed.2012-06-25 16:56:47 > >> > [8531] > >> > [6] INFO: AT2[Huawei-e220]: Closing device2012-06-25 16:56:47 [8531] > >> > [6] > >> > ERROR: AT2[Huawei-e220]: Couldn't connect (retrying in 10 > >> > seconds).2012-06-25 16:56:57 [8531] [6] INFO: AT2[Huawei-e220]: opening > >> > device2012-06-25 16:56:57 [8531] [6] INFO: AT2[Huawei-e220]: Logging > >> > in2012-06-25 16:56:58 [8531] [6] INFO: AT2[Huawei-e220]: init > >> > device2012-06-25 16:56:58 [8531] [6] INFO: AT2[Huawei-e220]: speed set > >> > to > >> > 1152002012-06-25 16:56:58 [8531] [6] ERROR: AT2[Huawei-e220]: Generic > >> > error: > >> > ERROR2012-06-25 16:56:58 [8531] [6] ERROR: AT2[Huawei-e220]: > >> > Initialization > >> > of device failed.2012-06-25 16:56:58 [8531] [6] INFO: AT2[Huawei-e220]: > >> > Closing device2012-06-25 16:56:58 [8531] [6] ERROR: AT2[Huawei-e220]: > >> > Couldn't connect (retrying in 10 seconds).2012-06-25 16:57:08 [8531] > >> > [6] > >> > INFO: AT2[Huawei-e220]: opening device2012-06-25 16:57:08 [8531] [6] > >> > INFO: > >> > AT2[Huawei-e220]: Logging in2012-06-25 16:57:09 [8531] [6] INFO: > >> > AT2[Huawei-e220]: init device2012-06-25 16:57:09 [8531] [6] INFO: > >> > AT2[Huawei-e220]: speed set to 1152002012-06-25 16:57:10 [8531] [6] > >> > ERROR: > >> > AT2[Huawei-e220]: Generic error: ERROR2012-06-25 16:57:10 [8531] [6] > >> > ERROR: > >> > AT2[Huawei-e220]: Initialization of device failed.2012-06-25 16:57:10 > >> > [8531] > >> > [6] INFO: AT2[Huawei-e220]: Closing device2012-06-25 16:57:10 [8531] > >> > [6] > >> > ERROR: AT2[Huawei-e220]: Couldn't connect (retrying in 10 > >> > seconds).2012-06-25 16:57:20 [8531] [6] INFO: AT2[Huawei-e220]: opening > >> > device2012-06-25 16:57:20 [8531] [6] INFO: AT2[Huawei-e220]: Logging > >> > in2012-06-25 16:57:20 [8531] [6] INFO: AT2[Huawei-e220]: init > >> > device2012-06-25 16:57:20 [8531] [6] INFO: AT2[Huawei-e220]: speed set > >> > to > >> > 1152002012-06-25 16:57:21 [8531] [6] ERROR: AT2[Huawei-e220]: Generic > >> > error: > >> > ERROR > >> > What am i doing wrong with the conf? > >> > > >> > > >> > >> > >> -- > >> |-----------------------------------------------------------------------------------------------------------------| > >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > >> celular y Nextel > >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > >> SMS y GPRS online > >> Visitenos en www.perusms.NET www.smsglobal.com.mx y > >> www.pravcom.com > > > > > -- > |-----------------------------------------------------------------------------------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > SMS y GPRS online > Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com
