Can you set log level to debug? ie = 0? So we can have more details on the problem?
Regards Alvaro On 6/25/12, vouk voukam voukam <[email protected]> wrote: > > I added as shown in the configuration section of modems below. The same > generic errors i get from bearerbox... > # Huawei E220 #It should be changed to work for your mobile group = modems > id = huawei_e220 name = "Huawei_E220" detect-string = "huawei" #init-string > = "ATZ" #init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" init-string = > "AT+CMEE=1" #init-string = "AT+CNMI=1,2,0,0,1" #init-string = > "AT+CNMI=2,1,2,2,0" message-storage=sm speed=9600 > >> Date: Mon, 25 Jun 2012 12:35:13 -0500 >> Subject: Re: Huawei E220 Generic error: ERROR - Initialization of device >> failed. >> From: [email protected] >> To: [email protected] >> CC: [email protected] >> >> can you add "+CMEE=1" or "+CMEE=2" to your modem init string? It might >> give you more detail on "generic error" message. >> >> Regards >> >> Alvaro >> >> On 6/25/12, vouk voukam voukam <[email protected]> wrote: >> > >> > I gave full access to USB01 chmod 777 /dev/ttyUSB0 and to >> > /devttyUSB1The >> > same error occurs >> >> Date: Mon, 25 Jun 2012 10:39:49 -0500 >> >> Subject: Re: Huawei E220 Generic error: ERROR - Initialization of >> >> device >> >> failed. >> >> From: [email protected] >> >> To: [email protected] >> >> CC: [email protected] >> >> >> >> check read/write permissions for kannel user into /dev/ttyUSB01 >> >> >> >> Regards >> >> >> >> Alvaro >> >> >> >> On 6/25/12, vouk voukam voukam <[email protected]> wrote: >> >> > >> >> > I want to setup Kannel in my Ubuntu machine. I have a Huawei e220 >> >> > modem >> >> > which is equipped with a SIM card and i have tested through minicom. >> >> > It >> >> > can >> >> > successfully reads and sends SMS messages to phone numbers.This is >> >> > my >> >> > configuration: >> >> > >> >> > group = core admin-port = 13002 smsbox-port = 13003 >> >> > admin-password = bar box-deny-ip = "*.*.*.*" box-allow-ip = >> >> > "127.0.0.1" group = smsc smsc = at modemtype = huawei >> >> > device >> >> > = /dev/ttyUSB1 my-number = number sms-center = number #SIM >> >> > Number >> >> > my-number = number #SIM Number log-level = 1 group = >> >> > modems >> >> > id = huawei_e220 name = "Huawei_E220" detect-string = "huawei" >> >> > init-string = "ATZ" init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 >> >> > +FCLASS=0" >> >> > message-storage=sm speed=9600 group = smsbox >> >> > bearerbox-host >> >> > = 127.0.0.1 sendsms-port = 13013 global-sender = numberThe >> >> > init-strings have been taken from /etc/wvdial.confwhen i am starting >> >> > bearerbox it seems that it is not starting correctly: >> >> > 2012-06-25 16:56:36 [8531] [6] ERROR: AT2[Huawei-e220]: >> >> > Initialization >> >> > of >> >> > device failed.2012-06-25 16:56:36 [8531] [6] INFO: AT2[Huawei-e220]: >> >> > Closing >> >> > device2012-06-25 16:56:36 [8531] [6] ERROR: AT2[Huawei-e220]: >> >> > Couldn't >> >> > connect (retrying in 10 seconds).2012-06-25 16:56:46 [8531] [6] >> >> > INFO: >> >> > AT2[Huawei-e220]: opening device2012-06-25 16:56:46 [8531] [6] INFO: >> >> > AT2[Huawei-e220]: Logging in2012-06-25 16:56:46 [8531] [6] INFO: >> >> > AT2[Huawei-e220]: init device2012-06-25 16:56:46 [8531] [6] INFO: >> >> > AT2[Huawei-e220]: speed set to 1152002012-06-25 16:56:47 [8531] [6] >> >> > ERROR: >> >> > AT2[Huawei-e220]: Generic error: ERROR2012-06-25 16:56:47 [8531] [6] >> >> > ERROR: >> >> > AT2[Huawei-e220]: Initialization of device failed.2012-06-25 >> >> > 16:56:47 >> >> > [8531] >> >> > [6] INFO: AT2[Huawei-e220]: Closing device2012-06-25 16:56:47 [8531] >> >> > [6] >> >> > ERROR: AT2[Huawei-e220]: Couldn't connect (retrying in 10 >> >> > seconds).2012-06-25 16:56:57 [8531] [6] INFO: AT2[Huawei-e220]: >> >> > opening >> >> > device2012-06-25 16:56:57 [8531] [6] INFO: AT2[Huawei-e220]: Logging >> >> > in2012-06-25 16:56:58 [8531] [6] INFO: AT2[Huawei-e220]: init >> >> > device2012-06-25 16:56:58 [8531] [6] INFO: AT2[Huawei-e220]: speed >> >> > set >> >> > to >> >> > 1152002012-06-25 16:56:58 [8531] [6] ERROR: AT2[Huawei-e220]: >> >> > Generic >> >> > error: >> >> > ERROR2012-06-25 16:56:58 [8531] [6] ERROR: AT2[Huawei-e220]: >> >> > Initialization >> >> > of device failed.2012-06-25 16:56:58 [8531] [6] INFO: >> >> > AT2[Huawei-e220]: >> >> > Closing device2012-06-25 16:56:58 [8531] [6] ERROR: >> >> > AT2[Huawei-e220]: >> >> > Couldn't connect (retrying in 10 seconds).2012-06-25 16:57:08 [8531] >> >> > [6] >> >> > INFO: AT2[Huawei-e220]: opening device2012-06-25 16:57:08 [8531] [6] >> >> > INFO: >> >> > AT2[Huawei-e220]: Logging in2012-06-25 16:57:09 [8531] [6] INFO: >> >> > AT2[Huawei-e220]: init device2012-06-25 16:57:09 [8531] [6] INFO: >> >> > AT2[Huawei-e220]: speed set to 1152002012-06-25 16:57:10 [8531] [6] >> >> > ERROR: >> >> > AT2[Huawei-e220]: Generic error: ERROR2012-06-25 16:57:10 [8531] [6] >> >> > ERROR: >> >> > AT2[Huawei-e220]: Initialization of device failed.2012-06-25 >> >> > 16:57:10 >> >> > [8531] >> >> > [6] INFO: AT2[Huawei-e220]: Closing device2012-06-25 16:57:10 [8531] >> >> > [6] >> >> > ERROR: AT2[Huawei-e220]: Couldn't connect (retrying in 10 >> >> > seconds).2012-06-25 16:57:20 [8531] [6] INFO: AT2[Huawei-e220]: >> >> > opening >> >> > device2012-06-25 16:57:20 [8531] [6] INFO: AT2[Huawei-e220]: Logging >> >> > in2012-06-25 16:57:20 [8531] [6] INFO: AT2[Huawei-e220]: init >> >> > device2012-06-25 16:57:20 [8531] [6] INFO: AT2[Huawei-e220]: speed >> >> > set >> >> > to >> >> > 1152002012-06-25 16:57:21 [8531] [6] ERROR: AT2[Huawei-e220]: >> >> > Generic >> >> > error: >> >> > ERROR >> >> > What am i doing wrong with the conf? >> >> > >> >> > >> >> >> >> >> >> -- >> >> |-----------------------------------------------------------------------------------------------------------------| >> >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >> >> celular y Nextel >> >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >> >> SMS y GPRS online >> >> Visitenos en www.perusms.NET www.smsglobal.com.mx y >> >> www.pravcom.com >> > >> >> >> -- >> |-----------------------------------------------------------------------------------------------------------------| >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >> celular y Nextel >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >> SMS y GPRS online >> Visitenos en www.perusms.NET www.smsglobal.com.mx y >> www.pravcom.com > -- |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com
