Hi Tapan, Unfortunately, the provider has not been very helpful in troubleshooting, I have only been provided with a screenshot proving his point that there are two connections to their SMSC. I was wondering if I am the only one whose bearerbox establishes two TCP connections to the SMSC verified under lsof -i. If so, follows is my kannel conf for group smsc maybe there is something i am missing
group = smsc smsc = smpp smsc-id = conn1 allowed-smsc-id = conn1 host = xxx.xxx.xxx.xxx port = xxxx receive-port = xxxx smsc-username = XXXX smsc-password = XXXX system-type = 'VMA' interface-version = 34 msg-id-type = 0 transceiver-mode = 1 reconnect-delay = 20 enquire-link-interval = 30 On Mon, Oct 15, 2012 at 3:39 PM, Tapan Kumar Thapa < [email protected]> wrote: > Hello Eric, > > Kindly don't forget to add users mailing list in your future quires. > > No, If you are connected as transceiver=false than you will not be able to > receive sms. > > Can you cross check with your SMPP provider if they have allowed you to > bind as transmitter? > > Or If they have given you two sessions one as TX and second as RX than i > will suggest appropriate connection strings. > > Kindly check. > > Regards > Tapan Thapa > > On Mon, Oct 15, 2012 at 6:04 PM, Eric Beda <[email protected]> wrote: > >> Hi Tapan, >> Yes, I have tried that,,,, it works, and via lsof -i I notice there is >> only one connection to the SMSC, but in such a mode, will I he able to >> receive SMS's ?? >> >> Regards >> >> >> On Mon, Oct 15, 2012 at 3:29 PM, Tapan Kumar Thapa < >> [email protected]> wrote: >> >>> Hello, >>> >>> Have you tried binding as Transmitter only. >>> >>> transceiver-mode=false >>> >>> Regards >>> Tapan Thapa >>> >>> >>> On Mon, Oct 15, 2012 at 5:56 PM, Eric Beda <[email protected]>wrote: >>> >>>> Hi all, >>>> >>>> I have come up with an unfortunate problem. I had a working kannel >>>> configuration with an operators SMSC, everything was working fine, then >>>> lately they say that I am connecting to there interface using two >>>> interfaces. They have now limited me to one, and my kannel logs receive an >>>> error >>>> >>>> SMSC rejected login to receive code 0x0000000d (bind failed) >>>> >>>> I have configured kannel as a transceiver via transceiver-mode=true. I >>>> have asked them to undue the interface limit whilst I re-configure my >>>> setup. >>>> >>>> I checked out the connections to my server via lsof -i .... I noticed >>>> is that bearerbox under transceiver-mode initiates two connections to SMSC, >>>> which I suspect the mobile operator treats as two interfaces. So my >>>> question is how do I get kannel to connect to SMSC via one TCP connection >>>> in transceiver mode >>>> >>>> Hope will get help >>>> >>>> Regards >>>> >>> >>> >> >
