Hi, Yes removing receive-port did the trick,,, thanks alot,,,,
Regards On Mon, Oct 15, 2012 at 3:51 PM, spameden <[email protected]> wrote: > Try changing system-type to > > system-type = "NULL" > > also you don't need receive-port = xxxx with transceiver-mode turned on, > you can remove it. > > > 2012/10/15 spameden <[email protected]> > >> I'm using multiple SMSC links with transceiver mode enabled. >> >> Only 1 connection established to the SMSC for each SMSC. >> >> What's kannel version you're on? >> >> >> >> 2012/10/15 Eric Beda <[email protected]> >> >>> Hi Tapan, >>> >>> Unfortunately, the provider has not been very helpful in >>> troubleshooting, I have only been provided with a screenshot proving his >>> point that there are two connections to their SMSC. I was wondering if I am >>> the only one whose bearerbox establishes two TCP connections to the SMSC >>> verified under lsof -i. If so, follows is my kannel conf for group smsc >>> maybe there is something i am missing >>> >>> group = smsc >>> smsc = smpp >>> smsc-id = conn1 >>> allowed-smsc-id = conn1 >>> host = xxx.xxx.xxx.xxx >>> port = xxxx >>> receive-port = xxxx >>> smsc-username = XXXX >>> smsc-password = XXXX >>> system-type = 'VMA' >>> interface-version = 34 >>> msg-id-type = 0 >>> transceiver-mode = 1 >>> reconnect-delay = 20 >>> enquire-link-interval = 30 >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> On Mon, Oct 15, 2012 at 3:39 PM, Tapan Kumar Thapa < >>> [email protected]> wrote: >>> >>>> Hello Eric, >>>> >>>> Kindly don't forget to add users mailing list in your future quires. >>>> >>>> No, If you are connected as transceiver=false than you will not be able >>>> to receive sms. >>>> >>>> Can you cross check with your SMPP provider if they have allowed you to >>>> bind as transmitter? >>>> >>>> Or If they have given you two sessions one as TX and second as RX than >>>> i will suggest appropriate connection strings. >>>> >>>> Kindly check. >>>> >>>> Regards >>>> Tapan Thapa >>>> >>>> On Mon, Oct 15, 2012 at 6:04 PM, Eric Beda <[email protected]>wrote: >>>> >>>>> Hi Tapan, >>>>> Yes, I have tried that,,,, it works, and via lsof -i I notice there is >>>>> only one connection to the SMSC, but in such a mode, will I he able to >>>>> receive SMS's ?? >>>>> >>>>> Regards >>>>> >>>>> >>>>> On Mon, Oct 15, 2012 at 3:29 PM, Tapan Kumar Thapa < >>>>> [email protected]> wrote: >>>>> >>>>>> Hello, >>>>>> >>>>>> Have you tried binding as Transmitter only. >>>>>> >>>>>> transceiver-mode=false >>>>>> >>>>>> Regards >>>>>> Tapan Thapa >>>>>> >>>>>> >>>>>> On Mon, Oct 15, 2012 at 5:56 PM, Eric Beda <[email protected]>wrote: >>>>>> >>>>>>> Hi all, >>>>>>> >>>>>>> I have come up with an unfortunate problem. I had a working kannel >>>>>>> configuration with an operators SMSC, everything was working fine, then >>>>>>> lately they say that I am connecting to there interface using two >>>>>>> interfaces. They have now limited me to one, and my kannel logs receive >>>>>>> an >>>>>>> error >>>>>>> >>>>>>> SMSC rejected login to receive code 0x0000000d (bind failed) >>>>>>> >>>>>>> I have configured kannel as a transceiver via transceiver-mode=true. >>>>>>> I have asked them to undue the interface limit whilst I re-configure my >>>>>>> setup. >>>>>>> >>>>>>> I checked out the connections to my server via lsof -i .... I >>>>>>> noticed is that bearerbox under transceiver-mode initiates two >>>>>>> connections >>>>>>> to SMSC, which I suspect the mobile operator treats as two interfaces. >>>>>>> So >>>>>>> my question is how do I get kannel to connect to SMSC via one TCP >>>>>>> connection in transceiver mode >>>>>>> >>>>>>> Hope will get help >>>>>>> >>>>>>> Regards >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >
