Hi
CNMI command depends on the modem. I use CNMI=2,1,2,1,0 with enfora
modems. Maybe this command is miss configured and hungs the modem
waiting for a reply from kannel. Try not using it and set
sim-buffering= true. This will make kannel look for MO instead of
modem sending MO to kannel. Also set message-store to SM so MO are
stored on SIM.
You can also try barring incomming calls with at+clck. There was
another command that hungs incomming calls at first ring but didn´t
remember it.
Google a little for info on how to configure both commands
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.com
On Wed, Jan 8, 2014 at 4:32 PM, Vinicio Cruz <[email protected]> wrote:
> Sorry Alvaro I didn't explain my self well, CMEE (2 not supported) and CNMI
> no problem at all... I was asking about the CGSMS setting to Circuit
> Switched (conf 1). By the way which CNMI conf do you use?
>
> I already set CGSMS to 1 and I'll wait for a batch to monitor if there is a
> behavior change. About the service center is properly configured as a mobile
> phone and the same used in regular phones.
>
> By the way this problem also happens when an unsolicited code RING appears,
> it gives me the felling that could happen with any unsolicited code while
> sending messages because them got in the middle when kannel is waiting for
> the sms sent response.
>
> I have noticed that when the SMSC is sending messages and I shutdown kannel
> via HTTP or command line the modems don't respond any more even thru Minicom
> AT commands, it seems like the modem stays in busy mode (CME error 515)
> forever and don't respond. I have checked for firmware update with the
> provider but no success, modem are a little old, 6 years ago, they are
> MTCBA-G-F2 model based on Wavecom Q2426B.
>
> -----Original Message-----
> From: Alvaro Cornejo [mailto:[email protected]]
> Sent: Wednesday, January 08, 2014 2:28 PM
> To: Vinicio Cruz
> Cc: users
> Subject: Re: Modem stops working after receiving an SMS while sending
>
> Hi Vinicio
>
> CMEE+1 is for vebosing errors. You might try =2 for more verbose but
> not all modems support it
> CNMI is for telling the modem to forward MO (incomming msg) to the serial
> port. ie kannel. Maybe fine tunning CNMI help? check each of its parameter.
> CGSMS is for specifiyng the sms center your modem will use. Use CGSMS?
> to get available options. command AT+CSCA will allow you to set the center
> number. This info is provided by your operator an is usually loaded at
> registration. You can check this number (usualy a mobile
> number) on any phone as "service center" under sms config.
>
> If modem didn't answer to minicom it might be a issue with the firmware of
> the modem that locks out after an MO. Check with manufacturer if there is an
> update.
>
> Hope helps.
>
> Alvaro
>
> |---------------------------------------------------------------------------
> --------------------------------------|
> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
> celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones
> 2 vias via SMS y GPRS online
> Visitenos en www.perusms.com
>
>
> On Wed, Jan 8, 2014 at 3:10 PM, Vinicio Cruz <[email protected]> wrote:
>> Hi Alvaro, thanks for your help.
>>
>> I asked for the CGSMS conf in the modem and in fact it is 1, anyway
>> I'll try your recommendation... the actual init string is:
>> "AT+CMEE=1;+CNMI=1,2,0,1,0" , can you explain me a little about the
>> setting 1?.
>>
>> No problems with the SIM it's a postpaid bulk plan with no limitations.
>>
>> Yes, I tried to connect to the modem with minicom after the error but
>> can't send any AT commands, looking to the modem's led (LS) indicates
>> that it is connected to the network.
>>
>> Regards.
>>
>> -----Original Message-----
>> From: Alvaro Cornejo [mailto:[email protected]]
>> Sent: Wednesday, January 08, 2014 1:29 PM
>> To: Vinicio Cruz
>> Cc: users
>> Subject: Re: Modem stops working after receiving an SMS while sending
>>
>> Hi
>>
>> Can you try to use AT+CGSMS=1 on the init string?
>>
>> Also, I assume your SIM is active and has enough funds.
>>
>> Have you tested in a minicom session sending manual commands? What
>> about your modem loosing network registration? Try AT+CREG?. it should
>> say something like CREG:1
>>
>> Regards
>>
>> Alvaro
>> |---------------------------------------------------------------------
>> |------
>> --------------------------------------|
>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
>> celular y Nextel en el Perú, México y en mas de 180 paises. Use
>> aplicaciones
>> 2 vias via SMS y GPRS online
>> Visitenos en www.perusms.com
>>
>>
>> On Wed, Jan 8, 2014 at 2:11 PM, Vinicio Cruz <[email protected]>
> wrote:
>>> Hello everyone and happy new year!.
>>>
>>>
>>>
>>> I’m having problems receiving messages and I wonder if someone has
>>> have the same problem or could help, here is the symptom: the modem
>>> is sending messages (>50 SMS) and at the time it receives a message,
>>> after that it gives some errors +CME ERROR 515 (according to my
>>> documentation: Please wait, init or command processing in progress.),
>>> after that error it tries to send messages but gets stock retrying.
>>> The worst part is that the modem does not respond any more until I
>>> turn it off, I tried to send AT commands via minicom but no response
>>> at
>> all.
>>>
>>>
>>>
>>> Elements used:
>>>
>>> OS: Linux SUSE
>>>
>>> Kannel: 1.4.1
>>>
>>> Modem: Multitech MultiModem GPRS (serial)
>>>
>>>
>>>
>>> This the part of the log where the error occurs:
>>>
>>>
>>>
>>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMGS:
>>> 66
>>>
>>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- OK
>>>
>>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) -
>>> send command status: 0 - retries: 2
>>>
>>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:03 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>
>>> 2014-01-08 11:44:03 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: 1 - retries: 2
>>>
>>> 2014-01-08 11:44:03 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> 0011000881755534290000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE16
>>> F
>>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDFF
>>> 0
>>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC6
>>> F
>>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3E
>>> D
>>> 3010
>>>
>>> 2014-01-08 11:44:05 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z
>>>
>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>
>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMGS:
>>> 67
>>>
>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- OK
>>>
>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) -
>>> send command status: 0 - retries: 2
>>>
>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>
>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: 1 - retries: 2
>>>
>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> 0011000881859750320000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE16
>>> F
>>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDFF
>>> 0
>>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC6
>>> F
>>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3E
>>> D
>>> 3010
>>>
>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z
>>>
>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMT:
>>> ,26
>>>
>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: <--
>>> 06910562909984040B910552039872F300004110801175444A074779789C0ECF01
>>>
>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: received
>>> message from SMSC: +5026099948
>>>
>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: Numeric
>>> sender
>>> (international) <+50253089273>
>>>
>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: User data
>>> length read as (7)
>>>
>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: Udh
>>> decoding done
>>> len=7 udhi=0 udhlen=0 udh=''
>>>
>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CNMA^M
>>>
>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>
>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
> ERROR:
>>> 515
>>>
>>> 2014-01-08 11:44:14 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error:
>>> +CME ERROR: 515
>>>
>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) -
>>> send command status: -1 - retries: 2
>>>
>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <--
>>>
>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
> ERROR:
>>> 515
>>>
>>> 2014-01-08 11:44:14 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error:
>>> +CME ERROR: 515
>>>
>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 1
>>>
>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: <--
>>>
>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
> ERROR:
>>> 515
>>>
>>> 2014-01-08 11:44:15 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error:
>>> +CME ERROR: 515
>>>
>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 0
>>>
>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: <--
>>>
>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
> ERROR:
>>> 515
>>>
>>> 2014-01-08 11:44:16 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error:
>>> +CME ERROR: 515
>>>
>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 2
>>>
>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: <--
>>>
>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
> ERROR:
>>> 515
>>>
>>> 2014-01-08 11:44:16 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error:
>>> +CME ERROR: 515
>>>
>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 1
>>>
>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:17 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>
>>> 2014-01-08 11:44:17 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: 1 - retries: 0
>>>
>>> 2014-01-08 11:44:17 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> 0011000881757680900000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE16
>>> F
>>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDFF
>>> 0
>>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC6
>>> F
>>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3E
>>> D
>>> 3010
>>>
>>> 2014-01-08 11:44:19 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z
>>>
>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMGS:
>>> 68
>>>
>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- OK
>>>
>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) -
>>> send command status: 0 - retries: 0
>>>
>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>
>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: 1 - retries: 2
>>>
>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> 0011000881750169220000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE16
>>> F
>>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDFF
>>> 0
>>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC6
>>> F
>>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3E
>>> D
>>> 3010
>>>
>>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z
>>>
>>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>
>>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
> ERROR:
>>> 515
>>>
>>> 2014-01-08 11:44:23 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error:
>>> +CME ERROR: 515
>>>
>>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) -
>>> send command status: -1 - retries: 2
>>>
>>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:30 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 1
>>>
>>> 2014-01-08 11:44:30 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:36 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 0
>>>
>>> 2014-01-08 11:44:36 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:44:36 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:42 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 2
>>>
>>> 2014-01-08 11:44:42 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:48 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 1
>>>
>>> 2014-01-08 11:44:48 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:44:54 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 0
>>>
>>> 2014-01-08 11:44:54 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:44:54 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:45:00 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 2
>>>
>>> 2014-01-08 11:45:00 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:45:06 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 1
>>>
>>> 2014-01-08 11:45:06 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:45:12 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 0
>>>
>>> 2014-01-08 11:45:12 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:45:12 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:45:18 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 2
>>>
>>> 2014-01-08 11:45:18 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:45:24 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 1
>>>
>>> 2014-01-08 11:45:24 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:45:30 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 0
>>>
>>> 2014-01-08 11:45:30 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:45:30 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:45:36 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 2
>>>
>>> 2014-01-08 11:45:36 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:45:42 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 1
>>>
>>> 2014-01-08 11:45:42 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:45:48 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 0
>>>
>>> 2014-01-08 11:45:48 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:45:48 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:45:54 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 2
>>>
>>> 2014-01-08 11:45:54 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:46:00 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 1
>>>
>>> 2014-01-08 11:46:00 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:46:06 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 0
>>>
>>> 2014-01-08 11:46:06 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:46:06 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:46:12 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 2
>>>
>>> 2014-01-08 11:46:12 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:46:18 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 1
>>>
>>> 2014-01-08 11:46:18 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:46:24 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 0
>>>
>>> 2014-01-08 11:46:24 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>> TP-Validity-Period: 5 minutes
>>>
>>> 2014-01-08 11:46:24 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:46:30 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 2
>>>
>>> 2014-01-08 11:46:30 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:46:36 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 1
>>>
>>> 2014-01-08 11:46:36 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>> AT+CMGS=141^M
>>>
>>> 2014-01-08 11:46:42 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>> send command status: -1 - retries: 0
>>>
>>>
>>>
>>> Hope some one can help, regards.
>>>
>>>
>>>
>>> Vinicio Cruz
>>>
>>> Moviclub
>>>
>>>
>>
>
