Thanks Alvaro, I'll try this settings tomorrow, just one question: you say to suppress the CNMI conf and use the sim-buffering and message-storage instead?.
About the CLCK I tried to use it but got the error "+CME ERROR: 30 No Network Service", it seems that the operator don't allow it. I'll inform about the result of the recommendations you gave me, by the way adding the +CGSMS=1 dind't help, the problem continued... Regards. -----Original Message----- From: Alvaro Cornejo [mailto:[email protected]] Sent: Wednesday, January 08, 2014 6:36 PM To: Vinicio Cruz Cc: users Subject: Re: Modem stops working after receiving an SMS while sending Hi CNMI command depends on the modem. I use CNMI=2,1,2,1,0 with enfora modems. Maybe this command is miss configured and hungs the modem waiting for a reply from kannel. Try not using it and set sim-buffering= true. This will make kannel look for MO instead of modem sending MO to kannel. Also set message-store to SM so MO are stored on SIM. You can also try barring incomming calls with at+clck. There was another command that hungs incomming calls at first ring but didn´t remember it. Google a little for info on how to configure both commands Regards Alvaro |--------------------------------------------------------------------------- --------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.com On Wed, Jan 8, 2014 at 4:32 PM, Vinicio Cruz <[email protected]> wrote: > Sorry Alvaro I didn't explain my self well, CMEE (2 not supported) and > CNMI no problem at all... I was asking about the CGSMS setting to > Circuit Switched (conf 1). By the way which CNMI conf do you use? > > I already set CGSMS to 1 and I'll wait for a batch to monitor if there > is a behavior change. About the service center is properly configured > as a mobile phone and the same used in regular phones. > > By the way this problem also happens when an unsolicited code RING > appears, it gives me the felling that could happen with any > unsolicited code while sending messages because them got in the middle > when kannel is waiting for the sms sent response. > > I have noticed that when the SMSC is sending messages and I shutdown > kannel via HTTP or command line the modems don't respond any more even > thru Minicom AT commands, it seems like the modem stays in busy mode > (CME error 515) forever and don't respond. I have checked for firmware > update with the provider but no success, modem are a little old, 6 > years ago, they are > MTCBA-G-F2 model based on Wavecom Q2426B. > > -----Original Message----- > From: Alvaro Cornejo [mailto:[email protected]] > Sent: Wednesday, January 08, 2014 2:28 PM > To: Vinicio Cruz > Cc: users > Subject: Re: Modem stops working after receiving an SMS while sending > > Hi Vinicio > > CMEE+1 is for vebosing errors. You might try =2 for more verbose but > not all modems support it > CNMI is for telling the modem to forward MO (incomming msg) to the > serial port. ie kannel. Maybe fine tunning CNMI help? check each of its parameter. > CGSMS is for specifiyng the sms center your modem will use. Use CGSMS? > to get available options. command AT+CSCA will allow you to set the > center number. This info is provided by your operator an is usually > loaded at registration. You can check this number (usualy a mobile > number) on any phone as "service center" under sms config. > > If modem didn't answer to minicom it might be a issue with the > firmware of the modem that locks out after an MO. Check with > manufacturer if there is an update. > > Hope helps. > > Alvaro > > |--------------------------------------------------------------------- > |------ > --------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel en el Perú, México y en mas de 180 paises. Use > aplicaciones > 2 vias via SMS y GPRS online > Visitenos en www.perusms.com > > > On Wed, Jan 8, 2014 at 3:10 PM, Vinicio Cruz <[email protected]> wrote: >> Hi Alvaro, thanks for your help. >> >> I asked for the CGSMS conf in the modem and in fact it is 1, anyway >> I'll try your recommendation... the actual init string is: >> "AT+CMEE=1;+CNMI=1,2,0,1,0" , can you explain me a little about the >> setting 1?. >> >> No problems with the SIM it's a postpaid bulk plan with no limitations. >> >> Yes, I tried to connect to the modem with minicom after the error but >> can't send any AT commands, looking to the modem's led (LS) indicates >> that it is connected to the network. >> >> Regards. >> >> -----Original Message----- >> From: Alvaro Cornejo [mailto:[email protected]] >> Sent: Wednesday, January 08, 2014 1:29 PM >> To: Vinicio Cruz >> Cc: users >> Subject: Re: Modem stops working after receiving an SMS while sending >> >> Hi >> >> Can you try to use AT+CGSMS=1 on the init string? >> >> Also, I assume your SIM is active and has enough funds. >> >> Have you tested in a minicom session sending manual commands? What >> about your modem loosing network registration? Try AT+CREG?. it >> should say something like CREG:1 >> >> Regards >> >> Alvaro >> |-------------------------------------------------------------------- >> |- >> |------ >> --------------------------------------| >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde >> cualquier celular y Nextel en el Perú, México y en mas de 180 paises. >> Use aplicaciones >> 2 vias via SMS y GPRS online >> Visitenos en www.perusms.com >> >> >> On Wed, Jan 8, 2014 at 2:11 PM, Vinicio Cruz <[email protected]> > wrote: >>> Hello everyone and happy new year!. >>> >>> >>> >>> Im having problems receiving messages and I wonder if someone has >>> have the same problem or could help, here is the symptom: the modem >>> is sending messages (>50 SMS) and at the time it receives a message, >>> after that it gives some errors +CME ERROR 515 (according to my >>> documentation: Please wait, init or command processing in >>> progress.), after that error it tries to send messages but gets stock retrying. >>> The worst part is that the modem does not respond any more until I >>> turn it off, I tried to send AT commands via minicom but no response >>> at >> all. >>> >>> >>> >>> Elements used: >>> >>> OS: Linux SUSE >>> >>> Kannel: 1.4.1 >>> >>> Modem: Multitech MultiModem GPRS (serial) >>> >>> >>> >>> This the part of the log where the error occurs: >>> >>> >>> >>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMGS: >>> 66 >>> >>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- OK >>> >>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) - >>> send command status: 0 - retries: 2 >>> >>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:03 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- > >>> >>> 2014-01-08 11:44:03 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: 1 - retries: 2 >>> >>> 2014-01-08 11:44:03 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> 0011000881755534290000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE1 >>> 6 >>> F >>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDF >>> F >>> 0 >>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC >>> 6 >>> F >>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3 >>> E >>> D >>> 3010 >>> >>> 2014-01-08 11:44:05 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z >>> >>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- > >>> >>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMGS: >>> 67 >>> >>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- OK >>> >>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) - >>> send command status: 0 - retries: 2 >>> >>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- > >>> >>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: 1 - retries: 2 >>> >>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> 0011000881859750320000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE1 >>> 6 >>> F >>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDF >>> F >>> 0 >>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC >>> 6 >>> F >>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3 >>> E >>> D >>> 3010 >>> >>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z >>> >>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMT: >>> ,26 >>> >>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >>> 06910562909984040B910552039872F300004110801175444A074779789C0ECF01 >>> >>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: received >>> message from SMSC: +5026099948 >>> >>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: Numeric >>> sender >>> (international) <+50253089273> >>> >>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: User data >>> length read as (7) >>> >>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: Udh >>> decoding done >>> len=7 udhi=0 udhlen=0 udh='' >>> >>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CNMA^M >>> >>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- > >>> >>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME > ERROR: >>> 515 >>> >>> 2014-01-08 11:44:14 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error: >>> +CME ERROR: 515 >>> >>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) - >>> send command status: -1 - retries: 2 >>> >>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >>> >>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME > ERROR: >>> 515 >>> >>> 2014-01-08 11:44:14 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error: >>> +CME ERROR: 515 >>> >>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 1 >>> >>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >>> >>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME > ERROR: >>> 515 >>> >>> 2014-01-08 11:44:15 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error: >>> +CME ERROR: 515 >>> >>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 0 >>> >>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >>> >>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME > ERROR: >>> 515 >>> >>> 2014-01-08 11:44:16 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error: >>> +CME ERROR: 515 >>> >>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 2 >>> >>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >>> >>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME > ERROR: >>> 515 >>> >>> 2014-01-08 11:44:16 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error: >>> +CME ERROR: 515 >>> >>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 1 >>> >>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:17 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- > >>> >>> 2014-01-08 11:44:17 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: 1 - retries: 0 >>> >>> 2014-01-08 11:44:17 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> 0011000881757680900000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE1 >>> 6 >>> F >>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDF >>> F >>> 0 >>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC >>> 6 >>> F >>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3 >>> E >>> D >>> 3010 >>> >>> 2014-01-08 11:44:19 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z >>> >>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMGS: >>> 68 >>> >>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- OK >>> >>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) - >>> send command status: 0 - retries: 0 >>> >>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- > >>> >>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: 1 - retries: 2 >>> >>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> 0011000881750169220000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE1 >>> 6 >>> F >>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDF >>> F >>> 0 >>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC >>> 6 >>> F >>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3 >>> E >>> D >>> 3010 >>> >>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z >>> >>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- > >>> >>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME > ERROR: >>> 515 >>> >>> 2014-01-08 11:44:23 [17559] [15] ERROR: AT2[rack-5-telca]: Generic error: >>> +CME ERROR: 515 >>> >>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) - >>> send command status: -1 - retries: 2 >>> >>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:30 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 1 >>> >>> 2014-01-08 11:44:30 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:36 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 0 >>> >>> 2014-01-08 11:44:36 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:44:36 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:42 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 2 >>> >>> 2014-01-08 11:44:42 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:48 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 1 >>> >>> 2014-01-08 11:44:48 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:44:54 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 0 >>> >>> 2014-01-08 11:44:54 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:44:54 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:45:00 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 2 >>> >>> 2014-01-08 11:45:00 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:45:06 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 1 >>> >>> 2014-01-08 11:45:06 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:45:12 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 0 >>> >>> 2014-01-08 11:45:12 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:45:12 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:45:18 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 2 >>> >>> 2014-01-08 11:45:18 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:45:24 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 1 >>> >>> 2014-01-08 11:45:24 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:45:30 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 0 >>> >>> 2014-01-08 11:45:30 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:45:30 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:45:36 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 2 >>> >>> 2014-01-08 11:45:36 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:45:42 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 1 >>> >>> 2014-01-08 11:45:42 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:45:48 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 0 >>> >>> 2014-01-08 11:45:48 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:45:48 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:45:54 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 2 >>> >>> 2014-01-08 11:45:54 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:46:00 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 1 >>> >>> 2014-01-08 11:46:00 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:46:06 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 0 >>> >>> 2014-01-08 11:46:06 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:46:06 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:46:12 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 2 >>> >>> 2014-01-08 11:46:12 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:46:18 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 1 >>> >>> 2014-01-08 11:46:18 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:46:24 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 0 >>> >>> 2014-01-08 11:46:24 [17559] [15] DEBUG: AT2[rack-5-telca]: >>> TP-Validity-Period: 5 minutes >>> >>> 2014-01-08 11:46:24 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:46:30 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 2 >>> >>> 2014-01-08 11:46:30 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:46:36 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 1 >>> >>> 2014-01-08 11:46:36 [17559] [15] DEBUG: AT2[rack-5-telca]: --> >>> AT+CMGS=141^M >>> >>> 2014-01-08 11:46:42 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS - >>> send command status: -1 - retries: 0 >>> >>> >>> >>> Hope some one can help, regards. >>> >>> >>> >>> Vinicio Cruz >>> >>> Moviclub >>> >>> >> >
