Yes, remove cnmi and use sim-buffering and message-store.

This way kannel will NOT receive any notification of inc sms but
kannel will query modem for messages.

Regards

Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
              Visitenos en www.perusms.com


On Wed, Jan 8, 2014 at 8:00 PM, Vinicio Cruz <[email protected]> wrote:
> Thanks Alvaro, I'll try this settings tomorrow, just one question: you say
> to suppress the CNMI conf and use the sim-buffering and message-storage
> instead?.
>
> About the CLCK I tried to use it but got the error "+CME ERROR: 30 No
> Network Service", it seems that the operator don't allow it.
>
> I'll inform about the result of the recommendations you gave me, by the way
> adding the +CGSMS=1 dind't help, the problem continued...
>
> Regards.
>
> -----Original Message-----
> From: Alvaro Cornejo [mailto:[email protected]]
> Sent: Wednesday, January 08, 2014 6:36 PM
> To: Vinicio Cruz
> Cc: users
> Subject: Re: Modem stops working after receiving an SMS while sending
>
> Hi
>
> CNMI command depends on the modem. I use CNMI=2,1,2,1,0 with enfora modems.
> Maybe this command is miss configured and hungs the modem waiting for a
> reply from kannel. Try not using it and set sim-buffering= true. This will
> make kannel look for MO instead of modem sending MO to kannel. Also set
> message-store to SM so MO are stored on SIM.
>
> You can also try barring incomming calls with at+clck. There was another
> command that hungs incomming calls at first ring but didn´t remember it.
>
> Google a little for info on how to configure both commands
>
> Regards
>
> Alvaro
> |---------------------------------------------------------------------------
> --------------------------------------|
> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
> celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones
> 2 vias via SMS y GPRS online
>               Visitenos en www.perusms.com
>
>
> On Wed, Jan 8, 2014 at 4:32 PM, Vinicio Cruz <[email protected]> wrote:
>> Sorry Alvaro I didn't explain my self well, CMEE (2 not supported) and
>> CNMI no problem at all... I was asking about the CGSMS setting to
>> Circuit Switched (conf 1). By the way which CNMI conf do you use?
>>
>> I already set CGSMS to 1 and I'll wait for a batch to monitor if there
>> is a behavior change. About the service center is properly configured
>> as a mobile phone and the same used in regular phones.
>>
>> By the way this problem also happens when an unsolicited code RING
>> appears, it gives me the felling that could happen with any
>> unsolicited code while sending messages because them got in the middle
>> when kannel is waiting for the sms sent response.
>>
>> I have noticed that when the SMSC is sending messages and I shutdown
>> kannel via HTTP or command line the modems don't respond any more even
>> thru Minicom AT commands, it seems like the modem stays in busy mode
>> (CME error 515) forever and don't respond. I have checked for firmware
>> update with the provider but no success, modem are a little old, 6
>> years ago, they are
>> MTCBA-G-F2 model based on Wavecom Q2426B.
>>
>> -----Original Message-----
>> From: Alvaro Cornejo [mailto:[email protected]]
>> Sent: Wednesday, January 08, 2014 2:28 PM
>> To: Vinicio Cruz
>> Cc: users
>> Subject: Re: Modem stops working after receiving an SMS while sending
>>
>> Hi Vinicio
>>
>> CMEE+1 is for vebosing errors. You might try =2 for more verbose but
>> not all modems support it
>> CNMI is for telling the modem to forward MO (incomming msg) to the
>> serial port. ie kannel. Maybe fine tunning CNMI help? check each of its
> parameter.
>> CGSMS is for specifiyng the sms center your modem will use. Use CGSMS?
>> to get available options. command AT+CSCA will allow you to set the
>> center number. This info is provided by your operator an is usually
>> loaded at registration. You can check this number (usualy a mobile
>> number) on any phone as "service center" under sms config.
>>
>> If modem didn't answer to minicom it might be a issue with the
>> firmware of the modem that locks out after an MO. Check with
>> manufacturer if there is an update.
>>
>> Hope helps.
>>
>> Alvaro
>>
>> |---------------------------------------------------------------------
>> |------
>> --------------------------------------|
>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
>> celular y Nextel en el Perú, México y en mas de 180 paises. Use
>> aplicaciones
>> 2 vias via SMS y GPRS online
>>               Visitenos en www.perusms.com
>>
>>
>> On Wed, Jan 8, 2014 at 3:10 PM, Vinicio Cruz <[email protected]>
> wrote:
>>> Hi Alvaro, thanks for your help.
>>>
>>> I asked for the CGSMS conf in the modem and in fact it is 1, anyway
>>> I'll try your recommendation...  the actual init string is:
>>> "AT+CMEE=1;+CNMI=1,2,0,1,0" , can you explain me a little about the
>>> setting 1?.
>>>
>>> No problems with the SIM it's a postpaid bulk plan with no limitations.
>>>
>>> Yes, I tried to connect to the modem with minicom after the error but
>>> can't send any AT commands, looking to the modem's led (LS) indicates
>>> that it is connected to the network.
>>>
>>> Regards.
>>>
>>> -----Original Message-----
>>> From: Alvaro Cornejo [mailto:[email protected]]
>>> Sent: Wednesday, January 08, 2014 1:29 PM
>>> To: Vinicio Cruz
>>> Cc: users
>>> Subject: Re: Modem stops working after receiving an SMS while sending
>>>
>>> Hi
>>>
>>> Can you try to use AT+CGSMS=1 on the init string?
>>>
>>> Also, I assume your SIM is active and has enough funds.
>>>
>>> Have you tested in a minicom session sending manual commands? What
>>> about your modem loosing network registration? Try AT+CREG?. it
>>> should say something like CREG:1
>>>
>>> Regards
>>>
>>> Alvaro
>>> |--------------------------------------------------------------------
>>> |-
>>> |------
>>> --------------------------------------|
>>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde
>>> cualquier celular y Nextel en el Perú, México y en mas de 180 paises.
>>> Use aplicaciones
>>> 2 vias via SMS y GPRS online
>>>               Visitenos en www.perusms.com
>>>
>>>
>>> On Wed, Jan 8, 2014 at 2:11 PM, Vinicio Cruz <[email protected]>
>> wrote:
>>>> Hello everyone and happy new year!.
>>>>
>>>>
>>>>
>>>> I’m having problems receiving messages and I wonder if someone has
>>>> have the same problem or could help, here is the symptom: the modem
>>>> is sending messages (>50 SMS) and at the time it receives a message,
>>>> after that it gives some errors +CME ERROR 515 (according to my
>>>> documentation: Please wait, init or command processing in
>>>> progress.), after that error it tries to send messages but gets stock
> retrying.
>>>> The worst part is that the modem does not respond any more until I
>>>> turn it off, I tried to send AT commands via minicom but no response
>>>> at
>>> all.
>>>>
>>>>
>>>>
>>>> Elements used:
>>>>
>>>>   OS: Linux SUSE
>>>>
>>>>   Kannel: 1.4.1
>>>>
>>>>   Modem: Multitech MultiModem GPRS (serial)
>>>>
>>>>
>>>>
>>>> This the part of the log where the error occurs:
>>>>
>>>>
>>>>
>>>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMGS:
>>>> 66
>>>>
>>>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- OK
>>>>
>>>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) -
>>>> send command status: 0 -  retries: 2
>>>>
>>>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:44:02 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:03 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>>
>>>> 2014-01-08 11:44:03 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: 1 - retries: 2
>>>>
>>>> 2014-01-08 11:44:03 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> 0011000881755534290000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE1
>>>> 6
>>>> F
>>>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDF
>>>> F
>>>> 0
>>>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC
>>>> 6
>>>> F
>>>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3
>>>> E
>>>> D
>>>> 3010
>>>>
>>>> 2014-01-08 11:44:05 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z
>>>>
>>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>>
>>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMGS:
>>>> 67
>>>>
>>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- OK
>>>>
>>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) -
>>>> send command status: 0 -  retries: 2
>>>>
>>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>>
>>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: 1 - retries: 2
>>>>
>>>> 2014-01-08 11:44:10 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> 0011000881859750320000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE1
>>>> 6
>>>> F
>>>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDF
>>>> F
>>>> 0
>>>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC
>>>> 6
>>>> F
>>>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3
>>>> E
>>>> D
>>>> 3010
>>>>
>>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z
>>>>
>>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMT:
>>>> ,26
>>>>
>>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: <--
>>>> 06910562909984040B910552039872F300004110801175444A074779789C0ECF01
>>>>
>>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: received
>>>> message from SMSC: +5026099948
>>>>
>>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: Numeric
>>>> sender
>>>> (international) <+50253089273>
>>>>
>>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: User data
>>>> length read as (7)
>>>>
>>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: Udh
>>>> decoding done
>>>> len=7 udhi=0 udhlen=0 udh=''
>>>>
>>>> 2014-01-08 11:44:13 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CNMA^M
>>>>
>>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>>
>>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
>> ERROR:
>>>> 515
>>>>
>>>> 2014-01-08 11:44:14 [17559] [15] ERROR: AT2[rack-5-telca]: Generic
> error:
>>>> +CME ERROR: 515
>>>>
>>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) -
>>>> send command status: -1 -  retries: 2
>>>>
>>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <--
>>>>
>>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
>> ERROR:
>>>> 515
>>>>
>>>> 2014-01-08 11:44:14 [17559] [15] ERROR: AT2[rack-5-telca]: Generic
> error:
>>>> +CME ERROR: 515
>>>>
>>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 1
>>>>
>>>> 2014-01-08 11:44:14 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: <--
>>>>
>>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
>> ERROR:
>>>> 515
>>>>
>>>> 2014-01-08 11:44:15 [17559] [15] ERROR: AT2[rack-5-telca]: Generic
> error:
>>>> +CME ERROR: 515
>>>>
>>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 0
>>>>
>>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:15 [17559] [15] DEBUG: AT2[rack-5-telca]: <--
>>>>
>>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
>> ERROR:
>>>> 515
>>>>
>>>> 2014-01-08 11:44:16 [17559] [15] ERROR: AT2[rack-5-telca]: Generic
> error:
>>>> +CME ERROR: 515
>>>>
>>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 2
>>>>
>>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: <--
>>>>
>>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
>> ERROR:
>>>> 515
>>>>
>>>> 2014-01-08 11:44:16 [17559] [15] ERROR: AT2[rack-5-telca]: Generic
> error:
>>>> +CME ERROR: 515
>>>>
>>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 1
>>>>
>>>> 2014-01-08 11:44:16 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:17 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>>
>>>> 2014-01-08 11:44:17 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: 1 - retries: 0
>>>>
>>>> 2014-01-08 11:44:17 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> 0011000881757680900000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE1
>>>> 6
>>>> F
>>>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDF
>>>> F
>>>> 0
>>>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC
>>>> 6
>>>> F
>>>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3
>>>> E
>>>> D
>>>> 3010
>>>>
>>>> 2014-01-08 11:44:19 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z
>>>>
>>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CMGS:
>>>> 68
>>>>
>>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- OK
>>>>
>>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) -
>>>> send command status: 0 -  retries: 0
>>>>
>>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>>
>>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: 1 - retries: 2
>>>>
>>>> 2014-01-08 11:44:20 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> 0011000881750169220000009341A8F4492CEAA86510390CAABBC3A0B33CEC06BDE1
>>>> 6
>>>> F
>>>> 39BDEE4E93C364103C2C0F83D2EEF4381D9683CA6C50B8FF068DDF6E50990D82CBDF
>>>> F
>>>> 0
>>>> F73C4D7F8346319630A80C4A41C422085A9C3E5DD0B73C5E2F83CA7378591E96B3DC
>>>> 6
>>>> F
>>>> 10B9AC2E83E0E179580E6A87E720723A3C7781A0422C4836C3D95A371A0CE662B2C3
>>>> E
>>>> D
>>>> 3010
>>>>
>>>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: --> ^Z
>>>>
>>>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- >
>>>>
>>>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: <-- +CME
>> ERROR:
>>>> 515
>>>>
>>>> 2014-01-08 11:44:23 [17559] [15] ERROR: AT2[rack-5-telca]: Generic
> error:
>>>> +CME ERROR: 515
>>>>
>>>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: (MSG) -
>>>> send command status: -1 -  retries: 2
>>>>
>>>> 2014-01-08 11:44:23 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:30 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 1
>>>>
>>>> 2014-01-08 11:44:30 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:36 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 0
>>>>
>>>> 2014-01-08 11:44:36 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:44:36 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:42 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 2
>>>>
>>>> 2014-01-08 11:44:42 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:48 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 1
>>>>
>>>> 2014-01-08 11:44:48 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:44:54 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 0
>>>>
>>>> 2014-01-08 11:44:54 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:44:54 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:45:00 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 2
>>>>
>>>> 2014-01-08 11:45:00 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:45:06 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 1
>>>>
>>>> 2014-01-08 11:45:06 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:45:12 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 0
>>>>
>>>> 2014-01-08 11:45:12 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:45:12 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:45:18 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 2
>>>>
>>>> 2014-01-08 11:45:18 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:45:24 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 1
>>>>
>>>> 2014-01-08 11:45:24 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:45:30 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 0
>>>>
>>>> 2014-01-08 11:45:30 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:45:30 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:45:36 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 2
>>>>
>>>> 2014-01-08 11:45:36 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:45:42 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 1
>>>>
>>>> 2014-01-08 11:45:42 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:45:48 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 0
>>>>
>>>> 2014-01-08 11:45:48 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:45:48 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:45:54 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 2
>>>>
>>>> 2014-01-08 11:45:54 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:46:00 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 1
>>>>
>>>> 2014-01-08 11:46:00 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:46:06 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 0
>>>>
>>>> 2014-01-08 11:46:06 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:46:06 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:46:12 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 2
>>>>
>>>> 2014-01-08 11:46:12 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:46:18 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 1
>>>>
>>>> 2014-01-08 11:46:18 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:46:24 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 0
>>>>
>>>> 2014-01-08 11:46:24 [17559] [15] DEBUG: AT2[rack-5-telca]:
>>>> TP-Validity-Period: 5 minutes
>>>>
>>>> 2014-01-08 11:46:24 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:46:30 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 2
>>>>
>>>> 2014-01-08 11:46:30 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:46:36 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 1
>>>>
>>>> 2014-01-08 11:46:36 [17559] [15] DEBUG: AT2[rack-5-telca]: -->
>>>> AT+CMGS=141^M
>>>>
>>>> 2014-01-08 11:46:42 [17559] [15] DEBUG: AT2[rack-5-telca]: CMGS -
>>>> send command status: -1 - retries: 0
>>>>
>>>>
>>>>
>>>> Hope some one can help, regards.
>>>>
>>>>
>>>>
>>>> Vinicio Cruz
>>>>
>>>> Moviclub
>>>>
>>>>
>>>
>>
>

Reply via email to