On 11/18/2014 01:20 PM, Sebastian Fohler wrote: > I've checked those configs again. > My debug level is at 4 which is supposed to be debug, and I listed all > modules in the debug modules list, which are proposed in the > configuration remark. > I guess I'm definitly in the highest level of debugging possible. > Still not enough information which is being logged. > > So what do I do now? > > On 16.11.2014 22:46, Sebastian Fohler wrote: >> Hi Nigel, >> >> I thought I already did, are you sure there is some level missing? >> I pasted my config as well, can you see some missing debug level or >> debug module? >> >> Thanks >> Sebastian >> >> On 15.11.2014 15:31, Nigel Kukard wrote: >>> Check your config file for logging options, enable all of them. -N
What I am not seeing in your logs is policy resolutions, make sure you're logging that and that you have a policy setup. Without any policy resolution information, you cannot see if any policies are being matched and subsequently if Amavis should even be used. Regardless of any subsequent messages you get, we need to take this on first, make sure your policies are resolving right, then check that the Amavis module is being used, and then check the results of that. -N _______________________________________________ Users mailing list [email protected] http://lists.policyd.org/mailman/listinfo/users_lists.policyd.org
