Glad to hear you got it working. :)
The Chromebook is quite an awesome ARM laptop. I'm hoping to get
one of the new ones (8 cores and 4GB of RAM) in the near future.
It should make a serious dent in the EL7 (((re)re)re) build time. ;)
Gordan
On 2014-06-12 16:32, Ian Perkins wrote:
Well, that was easy... it took me longer to figure out that the right
arrow key corresponded to F2...
On Thu, Jun 12, 2014 at 11:28 AM, Gordan Bobic <[email protected]>
wrote:
On 2014-06-12 16:18, Ian Perkins wrote:
I'm working on a Samsung Chromebook and I expect I have fat
fingered
something, as the system begins to boot, but hangs after
"Starting
console mouse services [OK]".
Are you sure this isn't the standard issue of no getty running
on tty1? Try Alt-F2, it might just drop you on the login prompt.
Are you running off external media or have you configured it
to run off built in MMC flash? If you are running from external
media check:
/etc/init/start-ttys.conf
/etc/sysconfig/init
for the ACTIVE_CONSOLES configuration. I usually change it
to disable getty on tty1 so the boot messages get preserved
for any debugging that may be required.
Is there a way to bypass init and drop to single user mode? I
think
there have been some changes since the wiki entry was written.
Firmware version is Google_Snow.2695.117.0
Possibly. The newer firmwares dropped the /boot/vmlinuz-3.4.0
file, but all that means is that you need to specify the raw
kernel partition as the kernel source to the vbutil_kernel
command. I am not aware of any other relevant changes.
Gordan
_______________________________________________
users mailing list
[email protected]
http://lists.redsleeve.org/mailman/listinfo/users [1]
--
Thanks,
Ian M Perkins
Links:
------
[1] http://lists.redsleeve.org/mailman/listinfo/users
_______________________________________________
users mailing list
[email protected]
http://lists.redsleeve.org/mailman/listinfo/users
_______________________________________________
users mailing list
[email protected]
http://lists.redsleeve.org/mailman/listinfo/users
