Hi all, sorry for the delay. 1. Re: bouncing CPUs - if I start a load on just 1 CPU, e.g. with "md5sum /dev/zero", CPU2 and CPU3 are activated and they stay up as long as that load is there. They seem to get activated depending on the load of the box; this is definitely not the case with Fedora (they stay up all the time) so I will have a look at the modules as you suggest Gordon. Doesn't seem to be a real problem though, apart from the irritating error messages - RSEL can use all 4 CPUs if it needs to. Makes "top" confusing though :-)
2. OK thanks, doing the initial yum update then installing openssh-server works fine. 3. Al, that link is definitely OK now, and it was when I posted it, but I did follow it after your email and got what you did - I guess their website must have been down. I see that Odroid hardware is now available in US from http://ameridroid.com/; they are available in Europe from a couple of distributors. Probably better/cheaper than shipping directly from Hardkernel which was a bit of a pain. Gordon - how do I create the WIki page - or do you have to do it? Thanks everyone! Andy On 1 November 2014 22:54, Al Hopper <[email protected]> wrote: > Hi Andy, > > Attached is a screen shot of what I see on that harkernel.com URL you > posted. > > Regards, > > On Fri, Oct 31, 2014 at 3:55 PM, Andy Moorhouse <[email protected]> > wrote: > >> Hello, >> >> I've started to experiment with RSEL on my Odroid U3: >> http://hardkernel.com/main/products/prdt_info.php >> >> Is anyone else using this board? There is no Wiki for it. I would be >> happy to write one, if useful - basically I flashed the official Odroid >> Fedora 20, then did what seems to be the "usual" thing of copying >> /lib/modules & /lib/firmware. >> >> One problem straight away is that CPU2 and CPU3 are continually being >> started up and shutdown. I get dmesg errors about them, like this: >> CPU2: Booted secondary processor >> CPU3: Booted secondary processor >> ... a few seconds >> CPU2: Shutdown >> CPU3: Shutdown >> >> I know the hardware is OK as it is fine with the official Fedora & Ubuntu >> images. Any ideas? >> >> Also - I would like to be able to ssh onto my RSEL Odroid, but yum >> install openssh-server fails with broken dependencies (installed >> telnet-server & started xinetd to allow me to get on to copy & paste this!): >> >> Error: Package: openssh-server-5.3p1-52.el6.2.armv5tel (rsel6) >> >> Requires: openssh = 5.3p1-52.el6.2 >> >> Installed: openssh-5.3p1-84.1.el6.armv5tel (installed) >> >> openssh = 5.3p1-84.1.el6 >> >> Available: openssh-5.3p1-52.el6.2.armv5tel (rsel6) >> >> openssh = 5.3p1-52.el6.2 >> Many thanks for any help, I like the RSEL project and hope it continues! >> Andy >> >> _______________________________________________ >> users mailing list >> [email protected] >> http://lists.redsleeve.org/mailman/listinfo/users >> >> > > > -- > Al Hopper > > _______________________________________________ > users mailing list > [email protected] > http://lists.redsleeve.org/mailman/listinfo/users > >
_______________________________________________ users mailing list [email protected] http://lists.redsleeve.org/mailman/listinfo/users
