That is an image version 2 for the original R-Pi. I don't think anybody has cooked up a new image for the Pi 2. I imagine you will need to at least replace the kernel and adjust the boot loader settings to boot the different kernel image.
On 02/14/2015 10:11 AM, Maulvi Bakar wrote:
Hello I got the Raspberry Pi 2 and after dd-flashing the 'raspi-v2-redsleeve-cli-0.6.img.xz' image successfully to a MicroSD card, the device stucks at the colourfu boot-up screen. The Red LED was on, the Green LED was also on but for a brief second or so before switching off and remain so. Any help is very much appreciate. Regards Maulvi On Sun, Dec 21, 2014 at 6:23 AM, Jacco Ligthart <[email protected] <mailto:[email protected]>> wrote: Hi All, Today I got my Raspberry model B+. It did not directly play nice with the 0.5 image, no video out. I remembered I saw something regarding this on the raspberry firmware git commits, so I tried a new kernel: that worked! I found this a good reason for a new image: raspi-v2-redsleeve-cli-0.6.img.xz which can of course be downloaded from here: http://cdn.opensxce.org/redsleeve/el6/rootfs/ Enjoy, Jacco _______________________________________________ users mailing list [email protected] <mailto:[email protected]> http://lists.redsleeve.org/mailman/listinfo/users _______________________________________________ users mailing list [email protected] http://lists.redsleeve.org/mailman/listinfo/users
_______________________________________________ users mailing list [email protected] http://lists.redsleeve.org/mailman/listinfo/users
