Hello Everyone Thank you for the advice all.. Very much appreciated.
I have replaced the contents of the /boot from 'raspi-v2-redsleeve-cli-0.6. img.xz' with those on master.zip and managed to get it to boot! This is what I got - [root@localhost ~]# date;uname -a;uptime;cat /etc/redhat-release Wed Dec 31 19:05:44 EST 1969 Linux localhost 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l armv7l armv7l GNU/Linux 19:05:44 up 5 min, 2 users, load average: 0.31, 0.30, 0.14 Red Sleeve Enterprise Linux release 6 (Leap) [root@localhost ~]# cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 38.40 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 1 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 38.40 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 2 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 38.40 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 3 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 38.40 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : BCM2709 Revision : a21041 Serial : 00000000a7e72f91 It did complain about missing module from /lib/module, I guess I need to fix that too. Anything else that I need to lookout for, all advices are very much appreciated. Regards Maulvi On Sun, Feb 15, 2015 at 12:20 PM, Robert Moskowitz <[email protected]> wrote: > Perhaps follow what I did for armv7 CUbies at: > > http://cdn.opensxce.org/redsleeve/el6/cubieboard2/ > > But instead of the Fedora 19 kernel, look at the work being posted on the > Fedora-arm list to get Fedora 21 working on the Raspberry Pi 2. Take that > kernel, then follow what I did and you could well be on your way. Though > the Fedora 22 beta might even be a better uboot and kernel to work with. > > > > On 02/14/2015 05:43 AM, Jacco Ligthart wrote: > > Hi Maulvi, > > the colourful boot-up screen is (at least at model B(+)) a sign that the > device did not understand the kernel. looking at the official raspi github > I see that model 2 support has been added 12 days ago ( > https://github.com/raspberrypi/firmware/commits/master) > > The kernel on that image is not that new, so I'm not really surprised that > it doesn't work. > > from here I can see two courses of action: > 1) download the latest kernel ( > https://github.com/raspberrypi/firmware/archive/master.zip) and copy the > relevant parts (most stuff under /boot and /modules) to your SD and see if > that boots. > 2) wait a bit :). My Pi model 2 is due to arrive early next week. Work > permitting I will probably update the image with the new kernel somewhere > in the coming 2 two weeks. > > The new kernel is quite a bit newer. It went from a 3.12.x to 3.18.x I > don't yet know the impact of that on the rest of the system. I also read a > bit about "device tree overlays" and some people were a bit confused about > that. > Point being that I'd like your input if you manage to get the new kernel > working. > > Jacco > > On 02/14/2015 11:11 AM, Maulvi Bakar wrote: > > Hello > > I got the Raspberry Pi 2 and after dd-flashing the > 'raspi-v2-redsleeve-cli-0.6.img.xz' image successfully to a MicroSD card, > the device stucks at the colourfu boot-up screen. > > The Red LED was on, the Green LED was also on but for a brief second or > so before switching off and remain so. > > Any help is very much appreciate. > > > Regards > > Maulvi > > > On Sun, Dec 21, 2014 at 6:23 AM, Jacco Ligthart <[email protected]> > wrote: > >> Hi All, >> >> Today I got my Raspberry model B+. It did not directly play nice with >> the 0.5 image, no video out. I remembered I saw something regarding this >> on the raspberry firmware git commits, so I tried a new kernel: that >> worked! >> >> I found this a good reason for a new image: >> raspi-v2-redsleeve-cli-0.6.img.xz >> >> which can of course be downloaded from here: >> http://cdn.opensxce.org/redsleeve/el6/rootfs/ >> >> Enjoy, >> >> Jacco >> _______________________________________________ >> users mailing list >> [email protected] >> http://lists.redsleeve.org/mailman/listinfo/users >> > > > > _______________________________________________ > users mailing > [email protected]http://lists.redsleeve.org/mailman/listinfo/users > > > > > _______________________________________________ > users mailing > [email protected]http://lists.redsleeve.org/mailman/listinfo/users > > > > _______________________________________________ > users mailing list > [email protected] > http://lists.redsleeve.org/mailman/listinfo/users > >
_______________________________________________ users mailing list [email protected] http://lists.redsleeve.org/mailman/listinfo/users
