Perhaps follow what I did for armv7 CUbies at:
http://cdn.opensxce.org/redsleeve/el6/cubieboard2/
But instead of the Fedora 19 kernel, look at the work being posted on
the Fedora-arm list to get Fedora 21 working on the Raspberry Pi 2.
Take that kernel, then follow what I did and you could well be on your
way. Though the Fedora 22 beta might even be a better uboot and kernel
to work with.
On 02/14/2015 05:43 AM, Jacco Ligthart wrote:
Hi Maulvi,
the colourful boot-up screen is (at least at model B(+)) a sign that
the device did not understand the kernel. looking at the official
raspi github I see that model 2 support has been added 12 days ago
(https://github.com/raspberrypi/firmware/commits/master)
The kernel on that image is not that new, so I'm not really surprised
that it doesn't work.
from here I can see two courses of action:
1) download the latest kernel
(https://github.com/raspberrypi/firmware/archive/master.zip) and copy
the relevant parts (most stuff under /boot and /modules) to your SD
and see if that boots.
2) wait a bit :). My Pi model 2 is due to arrive early next week. Work
permitting I will probably update the image with the new kernel
somewhere in the coming 2 two weeks.
The new kernel is quite a bit newer. It went from a 3.12.x to 3.18.x I
don't yet know the impact of that on the rest of the system. I also
read a bit about "device tree overlays" and some people were a bit
confused about that.
Point being that I'd like your input if you manage to get the new
kernel working.
Jacco
On 02/14/2015 11:11 AM, Maulvi Bakar wrote:
Hello
I got the Raspberry Pi 2 and after dd-flashing the
'raspi-v2-redsleeve-cli-0.6.img.xz' image successfully to a MicroSD
card, the device stucks at the colourfu boot-up screen.
The Red LED was on, the Green LED was also on but for a brief second
or so before switching off and remain so.
Any help is very much appreciate.
Regards
Maulvi
On Sun, Dec 21, 2014 at 6:23 AM, Jacco Ligthart <[email protected]
<mailto:[email protected]>> wrote:
Hi All,
Today I got my Raspberry model B+. It did not directly play nice with
the 0.5 image, no video out. I remembered I saw something
regarding this
on the raspberry firmware git commits, so I tried a new kernel:
that worked!
I found this a good reason for a new image:
raspi-v2-redsleeve-cli-0.6.img.xz
which can of course be downloaded from here:
http://cdn.opensxce.org/redsleeve/el6/rootfs/
Enjoy,
Jacco
_______________________________________________
users mailing list
[email protected] <mailto:[email protected]>
http://lists.redsleeve.org/mailman/listinfo/users
_______________________________________________
users mailing list
[email protected]
http://lists.redsleeve.org/mailman/listinfo/users
_______________________________________________
users mailing list
[email protected]
http://lists.redsleeve.org/mailman/listinfo/users
_______________________________________________
users mailing list
[email protected]
http://lists.redsleeve.org/mailman/listinfo/users
