Hi Maulvi, My raspberry2 did not arrive yet :(
however, I made a new kernel rpm. it should in theory also support the model 2. Can you please test ? It can be found here: http://cdn.opensxce.org/redsleeve/el6/raspberrypi/ Jacco On 02/15/2015 06:30 AM, Maulvi Bakar wrote: > Hello Everyone > > Thank you for the advice all.. Very much appreciated. > > I have replaced the contents of the /boot > from 'raspi-v2-redsleeve-cli-0.6.img.xz' with those on master.zip and > managed to get it to boot! This is what I got - > > [root@localhost ~]# date;uname -a;uptime;cat /etc/redhat-release > Wed Dec 31 19:05:44 EST 1969 > Linux localhost 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT > 2015 armv7l armv7l armv7l GNU/Linux > 19:05:44 up 5 min, 2 users, load average: 0.31, 0.30, 0.14 > Red Sleeve Enterprise Linux release 6 (Leap) > [root@localhost ~]# cat /proc/cpuinfo > processor : 0 > model name : ARMv7 Processor rev 5 (v7l) > BogoMIPS : 38.40 > Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 > idiva idivt vfpd32 lpae evtstrm > CPU implementer : 0x41 > CPU architecture: 7 > CPU variant : 0x0 > CPU part : 0xc07 > CPU revision : 5 > > processor : 1 > model name : ARMv7 Processor rev 5 (v7l) > BogoMIPS : 38.40 > Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 > idiva idivt vfpd32 lpae evtstrm > CPU implementer : 0x41 > CPU architecture: 7 > CPU variant : 0x0 > CPU part : 0xc07 > CPU revision : 5 > > processor : 2 > model name : ARMv7 Processor rev 5 (v7l) > BogoMIPS : 38.40 > Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 > idiva idivt vfpd32 lpae evtstrm > CPU implementer : 0x41 > CPU architecture: 7 > CPU variant : 0x0 > CPU part : 0xc07 > CPU revision : 5 > > processor : 3 > model name : ARMv7 Processor rev 5 (v7l) > BogoMIPS : 38.40 > Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 > idiva idivt vfpd32 lpae evtstrm > CPU implementer : 0x41 > CPU architecture: 7 > CPU variant : 0x0 > CPU part : 0xc07 > CPU revision : 5 > > Hardware : BCM2709 > Revision : a21041 > Serial : 00000000a7e72f91 > > It did complain about missing module from /lib/module, I guess I need > to fix that too. > > Anything else that I need to lookout for, all advices are very much > appreciated. > > > Regards > > Maulvi > > On Sun, Feb 15, 2015 at 12:20 PM, Robert Moskowitz > <[email protected] <mailto:[email protected]>> wrote: > > Perhaps follow what I did for armv7 CUbies at: > > http://cdn.opensxce.org/redsleeve/el6/cubieboard2/ > > But instead of the Fedora 19 kernel, look at the work being posted > on the Fedora-arm list to get Fedora 21 working on the Raspberry > Pi 2. Take that kernel, then follow what I did and you could well > be on your way. Though the Fedora 22 beta might even be a better > uboot and kernel to work with. > > > > On 02/14/2015 05:43 AM, Jacco Ligthart wrote: >> Hi Maulvi, >> >> the colourful boot-up screen is (at least at model B(+)) a sign >> that the device did not understand the kernel. looking at the >> official raspi github I see that model 2 support has been added >> 12 days ago (https://github.com/raspberrypi/firmware/commits/master) >> >> The kernel on that image is not that new, so I'm not really >> surprised that it doesn't work. >> >> from here I can see two courses of action: >> 1) download the latest kernel >> (https://github.com/raspberrypi/firmware/archive/master.zip) and >> copy the relevant parts (most stuff under /boot and /modules) to >> your SD and see if that boots. >> 2) wait a bit :). My Pi model 2 is due to arrive early next week. >> Work permitting I will probably update the image with the new >> kernel somewhere in the coming 2 two weeks. >> >> The new kernel is quite a bit newer. It went from a 3.12.x to >> 3.18.x I don't yet know the impact of that on the rest of the >> system. I also read a bit about "device tree overlays" and some >> people were a bit confused about that. >> Point being that I'd like your input if you manage to get the new >> kernel working. >> >> Jacco >> >> On 02/14/2015 11:11 AM, Maulvi Bakar wrote: >>> Hello >>> >>> I got the Raspberry Pi 2 and after dd-flashing the >>> 'raspi-v2-redsleeve-cli-0.6.img.xz' image successfully to a >>> MicroSD card, the device stucks at the colourfu boot-up screen. >>> >>> The Red LED was on, the Green LED was also on but for a brief >>> second or so before switching off and remain so. >>> >>> Any help is very much appreciate. >>> >>> >>> Regards >>> >>> Maulvi >>> >>> >>> On Sun, Dec 21, 2014 at 6:23 AM, Jacco Ligthart >>> <[email protected] <mailto:[email protected]>> wrote: >>> >>> Hi All, >>> >>> Today I got my Raspberry model B+. It did not directly play >>> nice with >>> the 0.5 image, no video out. I remembered I saw something >>> regarding this >>> on the raspberry firmware git commits, so I tried a new >>> kernel: that worked! >>> >>> I found this a good reason for a new image: >>> raspi-v2-redsleeve-cli-0.6.img.xz >>> >>> which can of course be downloaded from here: >>> http://cdn.opensxce.org/redsleeve/el6/rootfs/ >>> >>> Enjoy, >>> >>> Jacco >>> _______________________________________________ >>> users mailing list >>> [email protected] <mailto:[email protected]> >>> http://lists.redsleeve.org/mailman/listinfo/users >>> >>> >>> >>> >>> _______________________________________________ >>> users mailing list >>> [email protected] <mailto:[email protected]> >>> http://lists.redsleeve.org/mailman/listinfo/users >> >> >> >> _______________________________________________ >> users mailing list >> [email protected] <mailto:[email protected]> >> http://lists.redsleeve.org/mailman/listinfo/users > > > _______________________________________________ > users mailing list > [email protected] <mailto:[email protected]> > http://lists.redsleeve.org/mailman/listinfo/users > > > > > _______________________________________________ > users mailing list > [email protected] > http://lists.redsleeve.org/mailman/listinfo/users
_______________________________________________ users mailing list [email protected] http://lists.redsleeve.org/mailman/listinfo/users
