I would just mention that Debian Jessie runs fine on dreamplug. I can check the exact kernel when I get back home later today.
Sent from my iPhone > On 2015/10/21, at 10:20, Gordan Bobic <[email protected]> wrote: > > Figured it out in the end. > > The problem is that ehci-orion driver went from being built into > the kernel in the 3.6.x kernel on F18, to it being built as a > module. But - dracut didn't figure out that the ehci-orion > driver is vital for the usb-storage driver to find anything. > > Solution is to: > > 1) add > add_drivers+="ehci-orion" > to /etc/dracut.conf > > 2) Rebuild the initramfs: > dracut -f -v /boot/initramfs-3.10.90-kirkwood.img 3.10.90-kirkwood > (adjust for your kernel name and version) > > 3) Make uInitrd from the initramfs: > mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 -n initramfs -d > /boot/initramfs-3.10.90-kirkwood.img /boot/uInitrd > (make sure your uImage matches the kernel you are building the uInitrd for) > > Then it all boots fine. > > So, now that the part of working around bugs in Fedora is done, > I might actually be able to get somewhere with getting RedSleeve > to work on this thing... > > Best of all, the mainline 3.10.90 kernel seems to just work and > support all the hardware. And firmware auto-loading works, too. > > The question now is - do we try to stick with 3.10.x LT kernel > for as much hardware as possible, since that is sort of almost > similar to what EL7 ships (don't get me started on the upstream > kernel patches)? Or do we perhaps skip to the the currently > latest LT kernel series (3.18.x)? In theory, later kernels might > allow supporting more devices with a single kernel code base > (only different configs), rather than having 3.10 kernels for > some well supported SoCs like the Kirkwood, and having to > use later LT kernels for other things anyway. > > I can see the pros and cons either way, but I am leaning toward > jumping up to 3.18.x mainline LT kernels. Any opinions on this > from anyone here? > > Gordan > > > >> On 2015-10-20 10:37, Gordan Bobic wrote: >> I left the latest vanilla 3.10.90 kernel building this morning. I'm >> hoping to try it tonight. Fingers crossed that will just work. If the >> firmware loading is still broken (it is also broken on F18 with their >> 3.6.10 kernel) the only workaround I am aware of is to build the >> firmware blobs into the kernel binary. I had to do this with the >> 3.4 kernel for the Samsung Exynos Chromebook. >> Gordan >>> On 2015-10-19 22:59, ioan stan wrote: >>> Thank you, Gordon. >>>> On Oct 20, 2015, at 05:02, Gordan Bobic <[email protected]> wrote: >>>> I'm now looking into getting DreamPlugs running, and I've >>>> hit the same problem. The problem seems to be particularly >>>> related to the 3.10.14 kernel shipping with Fedora, in that >>>> it's usb-storage driver is broken on the DreamPlug - it never >>>> detects any USB storage devices. >>>> The 3.6.10 kernel from the original F18 ARM release works >>>> fine, however. >>>> Additionally, I updated the u-boot on my DP to >>>> 2014.10+dfsg1-5, and that version requires machid to be >>>> set to the GuruPlug's ID (annoyingly): >>>> machid=0xa63 >>>> Presumably the old 2011 firmware had this ID in bdinfo, and >>>> the 3.6 and 3.10 kernels aren't new enough to recognise the >>>> proper DP machid. >>>> Of course, all sorts of other things are broken in the F18 >>>> standard image as well (firmware loading fails for the WiFi >>>> module, courtesy of systemd removing support for udev firmware >>>> loader helpers, and the kernel's module loader being broken >>>> until more recent kernels). >>>> Gordan >>>>> On 2015-09-28 15:01, Gordan Bobic wrote: >>>>> It looks like your initramfs doesn't include the USB disk driver. >>>>> The device nodes aren't there. >>>>> Gordan >>>>>> On 2015-09-28 14:46, ioan stan wrote: >>>>>> Please see below. >>>>>> dracut:/# ls -la >>>>>> total 4 >>>>>> drwxr-xr-x 12 root 0 0 Sep 28 13:41 . >>>>>> drwxr-xr-x 12 root 0 0 Sep 28 13:41 .. >>>>>> -rw-r--r-- 1 root 0 0 Sep 28 13:41 .console_lock >>>>>> lrwxrwxrwx 1 root 0 7 Sep 20 16:37 bin -> usr/bin >>>>>> drwxr-xr-x 9 root 0 2340 Sep 28 13:38 dev >>>>>> drwxr-xr-x 8 root 0 0 Sep 28 13:41 etc >>>>>> lrwxrwxrwx 1 root 0 23 Sep 20 16:38 init -> usr/lib/systemd/systemd >>>>>> lrwxrwxrwx 1 root 0 7 Sep 20 16:37 lib -> usr/lib >>>>>> dr-xr-xr-x 50 root 0 0 Jan 1 1970 proc >>>>>> drwxr-xr-x 2 root 0 0 Sep 20 16:37 root >>>>>> drwxr-xr-x 9 root 0 180 Sep 28 13:41 run >>>>>> lrwxrwxrwx 1 root 0 8 Sep 20 16:37 sbin -> usr/sbin >>>>>> -rwxr-xr-x 1 root 0 3041 Aug 10 01:11 shutdown >>>>>> dr-xr-xr-x 12 root 0 0 Sep 28 13:38 sys >>>>>> drwxr-xr-x 2 root 0 0 Sep 20 16:37 sysroot >>>>>> drwxr-xr-x 2 root 0 0 Sep 20 16:37 tmp >>>>>> drwxr-xr-x 6 root 0 0 Sep 20 16:37 usr >>>>>> drwxr-xr-x 2 root 0 0 Sep 20 16:37 var >>>>>> dracut:/# >>>>>> dracut:/# ls -la dev/ | grep sd >>>>>> dracut:/# >>>>>> dracut:/# >>>>>> dracut:/# ls -la dev/ >>>>>> total 0 >>>>>> drwxr-xr-x 9 root 0 2340 Sep 28 13:38 . >>>>>> drwxr-xr-x 12 root 0 0 Sep 28 13:41 .. >>>>>> crw------- 1 root 0 10, 235 Sep 28 13:38 autofs >>>>>> drwxr-xr-x 2 root 0 200 Sep 28 13:38 block >>>>>> crw------- 1 root 0 10, 234 Sep 28 13:38 btrfs-control >>>>>> drwxr-xr-x 2 root 0 1940 Sep 28 13:38 char >>>>>> crw------- 1 root 0 5, 1 Sep 28 13:44 console >>>>>> crw------- 1 root 0 10, 62 Sep 28 13:38 cpu_dma_latency >>>>>> lrwxrwxrwx 1 root 0 13 Sep 28 13:38 fd -> /proc/self/fd >>>>>> crw-rw-rw- 1 root 0 1, 7 Sep 28 13:38 full >>>>>> crw-rw-rw- 1 root 0 10, 229 Sep 28 13:38 fuse >>>>>> drwxr-xr-x 2 root 0 60 Jan 1 1970 input >>>>>> crw-r--r-- 1 root 0 1, 11 Sep 28 13:38 kmsg >>>>>> srw-rw-rw- 1 root 0 0 Sep 28 13:38 log >>>>>> crw------- 1 root 0 10, 237 Sep 28 13:38 loop-control >>>>>> brw-rw---- 1 root disk 7, 0 Sep 28 13:38 loop0 >>>>>> brw-rw---- 1 root disk 7, 1 Sep 28 13:38 loop1 >>>>>> brw-rw---- 1 root disk 7, 2 Sep 28 13:38 loop2 >>>>>> brw-rw---- 1 root disk 7, 3 Sep 28 13:38 loop3 >>>>>> brw-rw---- 1 root disk 7, 4 Sep 28 13:38 loop4 >>>>>> brw-rw---- 1 root disk 7, 5 Sep 28 13:38 loop5 >>>>>> brw-rw---- 1 root disk 7, 6 Sep 28 13:38 loop6 >>>>>> brw-rw---- 1 root disk 7, 7 Sep 28 13:38 loop7 >>>>>> drwxr-xr-x 2 root 0 60 Jan 1 1970 mapper >>>>>> crw-r----- 1 root kmem 1, 1 Sep 28 13:38 mem >>>>>> crw------- 1 root 0 10, 61 Sep 28 13:38 network_latency >>>>>> crw------- 1 root 0 10, 60 Sep 28 13:38 network_throughput >>>>>> crw-rw-rw- 1 root 0 1, 3 Sep 28 13:38 null >>>>>> crw-r----- 1 root kmem 1, 4 Sep 28 13:38 port >>>>>> crw-rw-rw- 1 root tty 5, 2 Sep 28 13:38 ptmx >>>>>> drwxr-xr-x 2 root 0 0 Jan 1 1970 pts >>>>>> crw-rw-rw- 1 root 0 1, 8 Sep 28 13:38 random >>>>>> drwxr-xr-x 2 root 0 60 Jan 1 1970 raw >>>>>> crw-rw-r-- 1 root 0 10, 59 Sep 28 13:38 rfkill >>>>>> lrwxrwxrwx 1 root 0 4 Sep 28 13:38 rtc -> rtc0 >>>>>> crw------- 1 root 0 254, 0 Sep 28 13:38 rtc0 >>>>>> drwxrwxrwt 2 root 0 40 Sep 28 13:38 shm >>>>>> lrwxrwxrwx 1 root 0 15 Sep 28 13:38 stderr -> /proc/self/fd/2 >>>>>> lrwxrwxrwx 1 root 0 15 Sep 28 13:38 stdin -> /proc/self/fd/0 >>>>>> lrwxrwxrwx 1 root 0 15 Sep 28 13:38 stdout -> /proc/self/fd/1 >>>>>> crw-rw-rw- 1 root tty 5, 0 Sep 28 13:38 tty >>>>>> crw--w---- 1 root tty 4, 0 Sep 28 13:38 tty0 >>>>>> crw--w---- 1 root tty 4, 1 Sep 28 13:38 tty1 >>>>>> crw--w---- 1 root tty 4, 10 Sep 28 13:38 tty10 >>>>>> crw--w---- 1 root tty 4, 11 Sep 28 13:38 tty11 >>>>>> crw--w---- 1 root tty 4, 12 Sep 28 13:38 tty12 >>>>>> crw--w---- 1 root tty 4, 13 Sep 28 13:38 tty13 >>>>>> crw--w---- 1 root tty 4, 14 Sep 28 13:38 tty14 >>>>>> crw--w---- 1 root tty 4, 15 Sep 28 13:38 tty15 >>>>>> crw--w---- 1 root tty 4, 16 Sep 28 13:38 tty16 >>>>>> crw--w---- 1 root tty 4, 17 Sep 28 13:38 tty17 >>>>>> crw--w---- 1 root tty 4, 18 Sep 28 13:38 tty18 >>>>>> crw--w---- 1 root tty 4, 19 Sep 28 13:38 tty19 >>>>>> crw--w---- 1 root tty 4, 2 Sep 28 13:38 tty2 >>>>>> crw--w---- 1 root tty 4, 20 Sep 28 13:38 tty20 >>>>>> crw--w---- 1 root tty 4, 21 Sep 28 13:38 tty21 >>>>>> crw--w---- 1 root tty 4, 22 Sep 28 13:38 tty22 >>>>>> crw--w---- 1 root tty 4, 23 Sep 28 13:38 tty23 >>>>>> crw--w---- 1 root tty 4, 24 Sep 28 13:38 tty24 >>>>>> crw--w---- 1 root tty 4, 25 Sep 28 13:38 tty25 >>>>>> crw--w---- 1 root tty 4, 26 Sep 28 13:38 tty26 >>>>>> crw--w---- 1 root tty 4, 27 Sep 28 13:38 tty27 >>>>>> crw--w---- 1 root tty 4, 28 Sep 28 13:38 tty28 >>>>>> crw--w---- 1 root tty 4, 29 Sep 28 13:38 tty29 >>>>>> crw--w---- 1 root tty 4, 3 Sep 28 13:38 tty3 >>>>>> crw--w---- 1 root tty 4, 30 Sep 28 13:38 tty30 >>>>>> crw--w---- 1 root tty 4, 31 Sep 28 13:38 tty31 >>>>>> crw--w---- 1 root tty 4, 32 Sep 28 13:38 tty32 >>>>>> crw--w---- 1 root tty 4, 33 Sep 28 13:38 tty33 >>>>>> crw--w---- 1 root tty 4, 34 Sep 28 13:38 tty34 >>>>>> crw--w---- 1 root tty 4, 35 Sep 28 13:38 tty35 >>>>>> crw--w---- 1 root tty 4, 36 Sep 28 13:38 tty36 >>>>>> crw--w---- 1 root tty 4, 37 Sep 28 13:38 tty37 >>>>>> crw--w---- 1 root tty 4, 38 Sep 28 13:38 tty38 >>>>>> crw--w---- 1 root tty 4, 39 Sep 28 13:38 tty39 >>>>>> crw--w---- 1 root tty 4, 4 Sep 28 13:38 tty4 >>>>>> crw--w---- 1 root tty 4, 40 Sep 28 13:38 tty40 >>>>>> crw--w---- 1 root tty 4, 41 Sep 28 13:38 tty41 >>>>>> crw--w---- 1 root tty 4, 42 Sep 28 13:38 tty42 >>>>>> crw--w---- 1 root tty 4, 43 Sep 28 13:38 tty43 >>>>>> crw--w---- 1 root tty 4, 44 Sep 28 13:38 tty44 >>>>>> crw--w---- 1 root tty 4, 45 Sep 28 13:38 tty45 >>>>>> crw--w---- 1 root tty 4, 46 Sep 28 13:38 tty46 >>>>>> crw--w---- 1 root tty 4, 47 Sep 28 13:38 tty47 >>>>>> crw--w---- 1 root tty 4, 48 Sep 28 13:38 tty48 >>>>>> crw--w---- 1 root tty 4, 49 Sep 28 13:38 tty49 >>>>>> crw--w---- 1 root tty 4, 5 Sep 28 13:38 tty5 >>>>>> crw--w---- 1 root tty 4, 50 Sep 28 13:38 tty50 >>>>>> crw--w---- 1 root tty 4, 51 Sep 28 13:38 tty51 >>>>>> crw--w---- 1 root tty 4, 52 Sep 28 13:38 tty52 >>>>>> crw--w---- 1 root tty 4, 53 Sep 28 13:38 tty53 >>>>>> crw--w---- 1 root tty 4, 54 Sep 28 13:38 tty54 >>>>>> crw--w---- 1 root tty 4, 55 Sep 28 13:38 tty55 >>>>>> crw--w---- 1 root tty 4, 56 Sep 28 13:38 tty56 >>>>>> crw--w---- 1 root tty 4, 57 Sep 28 13:38 tty57 >>>>>> crw--w---- 1 root tty 4, 58 Sep 28 13:38 tty58 >>>>>> crw--w---- 1 root tty 4, 59 Sep 28 13:38 tty59 >>>>>> crw--w---- 1 root tty 4, 6 Sep 28 13:38 tty6 >>>>>> crw--w---- 1 root tty 4, 60 Sep 28 13:38 tty60 >>>>>> crw--w---- 1 root tty 4, 61 Sep 28 13:38 tty61 >>>>>> crw--w---- 1 root tty 4, 62 Sep 28 13:38 tty62 >>>>>> crw--w---- 1 root tty 4, 63 Sep 28 13:38 tty63 >>>>>> crw--w---- 1 root tty 4, 7 Sep 28 13:38 tty7 >>>>>> crw--w---- 1 root tty 4, 8 Sep 28 13:38 tty8 >>>>>> crw--w---- 1 root tty 4, 9 Sep 28 13:38 tty9 >>>>>> crw-rw---- 1 root dialout 4, 64 Sep 28 13:41 ttyS0 >>>>>> crw-rw---- 1 root dialout 4, 65 Sep 28 13:38 ttyS1 >>>>>> crw-rw---- 1 root dialout 4, 66 Sep 28 13:38 ttyS2 >>>>>> crw-rw---- 1 root dialout 4, 67 Sep 28 13:38 ttyS3 >>>>>> crw-rw-rw- 1 root 0 1, 9 Sep 28 13:38 urandom >>>>>> crw------- 1 root 0 251, 0 Sep 28 13:38 usbmon0 >>>>>> crw-rw---- 1 root tty 7, 0 Sep 28 13:38 vcs >>>>>> crw-rw---- 1 root tty 7, 1 Sep 28 13:38 vcs1 >>>>>> crw-rw---- 1 root tty 7, 128 Sep 28 13:38 vcsa >>>>>> crw-rw---- 1 root tty 7, 129 Sep 28 13:38 vcsa1 >>>>>> crw------- 1 root 0 10, 63 Sep 28 13:38 vga_arbiter >>>>>> crw-rw-rw- 1 root 0 1, 5 Sep 28 13:38 zero >>>>>> dracut:/# >>>>>> -----Original Message----- >>>>>> FROM: Gordan Bobic <[email protected]> >>>>>> Reply-to: [email protected] >>>>>> TO: [email protected] >>>>>> SUBJECT: Re: [RedSleeve-Users] Redsleeve 7.1 - loose ends >>>>>> DATE: Mon, 28 Sep 2015 14:15:17 +0100 >>>>>> What does: >>>>>> ls -la /dev/sd* >>>>>> show from the dracut prompt? >>>>>>> On 2015-09-28 13:28, ioan stan wrote: >>>>>>> I tried the setting below (and also with sda2), the booting stops at >>>>>>> the same step. >>>>>>> bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait >>>>>>> -----Original Message----- >>>>>>> FROM: Gordan Bobic <[email protected]> >>>>>>> Reply-to: [email protected] >>>>>>> TO: [email protected] >>>>>>> SUBJECT: Re: [RedSleeve-Users] Redsleeve 7.1 - loose ends >>>>>>> DATE: Mon, 28 Sep 2015 12:49:21 +0100 >>>>>>> The problem isn't in the uboot settings, it is in the file system >>>>>> you >>>>>>> are >>>>>>> booting off. You are telling the kernel the rootfs is labeled >>>>>>> "rootfs". >>>>>>> Therefore you need to e2label the rootfs file system "rootfs" or it >>>>>>> won't find it. >>>>>>> Alternatively change : >>>>>>>> bootargs=console=ttyS0,115200 root=LABEL=rootfs rootwait >>>>>>> to >>>>>>>> bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait >>>>>>> assuming your rootfs is on sda1. >>>>>>> Gordan >>>>>>>> On 2015-09-28 12:43, Ioan Stan wrote: >>>>>>>> I'm not very proficient with u-boot, but the settings below work >>>>>>> when >>>>>>>> booting F18. >>>>>>>> Marvell>> printenv >>>>>>>> baudrate=115200 >>>>>>>> bootargs=console=ttyS0,115200 root=LABEL=rootfs rootwait >>>>>>>> bootargs_console=console=ttyS0,115200 selinux=0 elevator=deadline >>>>>>>> bootargs_root=rw root=/dev/nfs >>>>>>>> nfsroot=10.1.1.200:/nfsroot/guru,proto=tcp ip=dhcp >>>>>>>> bootcmd=usb start; ${loadImage}; ${loadInitrd} ; bootm 0x6400000 >>>>>>>> 0x7400000 >>>>>>>> bootcmd_tftp=dhcp; set serverip 10.1.1.200; tftpboot 0x6400000 >>>>>>>> sheeva-2.6.39.4-uImage >>>>>>>> bootdelay=3 >>>>>>>> eth1addr=delete >>>>>>>> ethact=egiga0 >>>>>>>> ethaddr=02:50:43:52:a6:2d >>>>>>>> ipaddr=10.1.1.221 >>>>>>>> loadImage=ext2load usb 0:1 0x6400000 uImage >>>>>>>> loadInitrd=ext2load usb 0:1 0x7400000 uInitrd >>>>>>>> serverip=10.1.1.200 >>>>>>>> stderr=serial >>>>>>>> stdin=serial >>>>>>>> stdout=serial >>>>>>>> x_bootargs=console=ttyS0,115200 >>>>>>>> x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs >>>>>>>> x_bootcmd_ethernet=ping 192.168.2.1 >>>>>>>> x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000 >>>>>>>> x_bootcmd_usb=usb start >>>>>>>> Environment size: 873/131068 bytes >>>>>>>> Marvell>> >>>>>>>>> On Sep 28, 2015, at 8:39 PM, Gordan Bobic <[email protected]> >>>>>>>>> wrote: >>>>>>>>> Forgive the obviousness of the question, but did you e2label >>>>>>>>> the rootfs file system? >>>>>>>>> Gordan >>>>>>>>>> On 2015-09-28 12:28, Ioan Stan wrote: >>>>>>>>>> Sorry for my late reply. I get dracut error when trying to boot >>>>>>> from >>>>>>>>>> RSEL 7. Please let me know if you need other info. >>>>>>>>>> U-Boot 2011.12 (Mar 11 2012 - 18:53:15) >>>>>>>>>> Marvell-GuruPlug >>>>>>>>>> SoC: Kirkwood 88F6281_A1 >>>>>>>>>> DRAM: 512 MiB >>>>>>>>>> WARNING: Caches not enabled >>>>>>>>>> NAND: 512 MiB >>>>>>>>>> In: serial >>>>>>>>>> Out: serial >>>>>>>>>> Err: serial >>>>>>>>>> Net: egiga0, egiga1 >>>>>>>>>> 88E1121 Initialized on egiga0 >>>>>>>>>> PHY reset timed out >>>>>>>>>> 88E1121 Initialized on egiga1 >>>>>>>>>> Hit any key to stop autoboot: 0 >>>>>>>>>> (Re)start USB... >>>>>>>>>> USB: Register 10011 NbrPorts 1 >>>>>>>>>> USB EHCI 1.00 >>>>>>>>>> scanning bus for devices... 3 USB Device(s) found >>>>>>>>>> scanning bus for storage devices... 1 Storage Device(s) found >>>>>>>>>> Loading file "uImage" from usb device 0:1 (usbda1) >>>>>>>>>> 3665856 bytes read >>>>>>>>>> Loading file "uInitrd" from usb device 0:1 (usbda1) >>>>>>>>>> 17811253 bytes read >>>>>>>>>> ## Booting kernel from Legacy Image at 06400000 ... >>>>>>>>>> Image Name: 3.10.14-100.fc18.armv5tel.kirkwo >>>>>>>>>> Image Type: ARM Linux Kernel Image (uncompressed) >>>>>>>>>> Data Size: 3665792 Bytes = 3.5 MiB >>>>>>>>>> Load Address: 00008000 >>>>>>>>>> Entry Point: 00008000 >>>>>>>>>> Verifying Checksum ... OK >>>>>>>>>> ## Loading init Ramdisk from Legacy Image at 07400000 ... >>>>>>>>>> Image Name: initramfs >>>>>>>>>> Image Type: ARM Linux RAMDisk Image (uncompressed) >>>>>>>>>> Data Size: 17811189 Bytes = 17 MiB >>>>>>>>>> Load Address: 00000000 >>>>>>>>>> Entry Point: 00000000 >>>>>>>>>> Verifying Checksum ... OK >>>>>>>>>> Loading Kernel Image ... OK >>>>>>>>>> OK >>>>>>>>>> Starting kernel ... >>>>>>>>>> Uncompressing Linux... done, booting the kernel. >>>>>>>>>> [ 0.000000] Booting Linux on physical CPU 0x0 >>>>>>>>>> [ 0.000000] Initializing cgroup subsys cpuset >>>>>>>>>> [ 0.000000] Initializing cgroup subsys cpu >>>>>>>>>> [ 0.000000] Initializing cgroup subsys cpuacct >>>>>>>>>> [ 0.000000] Linux version 3.10.14-100.fc18.armv5tel.kirkwood >>>>>>>>>> ([email protected]) (gcc 3 >>>>>>>>>> [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 >>>>>> (ARMv5TE), >>>>>>>>>> cr=00053977 >>>>>>>>>> [ 0.000000] CPU: VIVT data cache, VIVT instruction cache >>>>>>>>>> [ 0.000000] Machine: Marvell GuruPlug Reference Board >>>>>>>>>> [ 0.000000] Memory policy: ECC disabled, Data cache writeback >>>>>>>>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping >>>>>> on. >>>>>>>>>> Total pages: 130048 >>>>>>>>>> [ 0.000000] Kernel command line: console=ttyS0,115200 >>>>>>>>>> root=LABEL=rootfs rootwait >>>>>>>>>> [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) >>>>>>>>>> [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, >>>>>>>>>> 262144 bytes) >>>>>>>>>> [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, >>>>>>>>>> 131072 bytes) >>>>>>>>>> [ 0.000000] allocated 1048576 bytes of page_cgroup >>>>>>>>>> [ 0.000000] please try 'cgroup_disable=memory' option if you >>>>>> don't >>>>>>>>>> want memory cgroups >>>>>>>>>> [ 0.000000] Memory: 512MB = 512MB total >>>>>>>>>> [ 0.000000] Memory: 493024k/493024k available, 31264k reserved, >>>>>> 0K >>>>>>>>>> highmem >>>>>>>>>> [ 0.000000] Virtual kernel memory layout: >>>>>>>>>> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) >>>>>>>>>> [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) >>>>>>>>>> [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) >>>>>>>>>> [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) >>>>>>>>>> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) >>>>>>>>>> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) >>>>>>>>>> [ 0.000000] .text : 0xc0008000 - 0xc0678cbc (6596 kB) >>>>>>>>>> [ 0.000000] .init : 0xc0679000 - 0xc06d112c ( 353 kB) >>>>>>>>>> [ 0.000000] .data : 0xc06d2000 - 0xc073ffb0 ( 440 kB) >>>>>>>>>> [ 0.000000] .bss : 0xc073ffb0 - 0xc081ac30 ( 876 kB) >>>>>>>>>> [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, >>>>>>>>>> Nodes=1 >>>>>>>>>> [ 0.000000] NR_IRQS:114 >>>>>>>>>> [ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps >>>>>>>>>> every 21474ms >>>>>>>>>> [ 0.000000] Console: colour dummy device 80x30 >>>>>>>>>> [ 2.767292] Calibrating delay loop... 1191.11 BogoMIPS >>>>>>>>>> (lpj=5955584) >>>>>>>>>> [ 2.857166] pid_max: default: 32768 minimum: 301 >>>>>>>>>> [ 2.857335] Security Framework initialized >>>>>>>>>> [ 2.857379] SELinux: Initializing. >>>>>>>>>> [ 2.857686] Mount-cache hash table entries: 512 >>>>>>>>>> [ 2.858360] Initializing cgroup subsys memory >>>>>>>>>> [ 2.858411] Initializing cgroup subsys devices >>>>>>>>>> [ 2.858425] Initializing cgroup subsys freezer >>>>>>>>>> [ 2.858435] Initializing cgroup subsys net_cls >>>>>>>>>> [ 2.858444] Initializing cgroup subsys blkio >>>>>>>>>> [ 2.858453] Initializing cgroup subsys perf_event >>>>>>>>>> [ 2.858597] CPU: Testing write buffer coherency: ok >>>>>>>>>> [ 2.858700] ftrace: allocating 19764 entries in 39 pages >>>>>>>>>> [ 2.888683] Setting up static identity map for 0xc048aed8 - >>>>>>>>>> 0xc048af14 >>>>>>>>>> [ 2.900719] devtmpfs: initialized >>>>>>>>>> [ 2.909222] atomic64 test passed >>>>>>>>>> [ 2.909237] pinctrl core: initialized pinctrl subsystem >>>>>>>>>> [ 2.909686] regulator-dummy: no parameters >>>>>>>>>> [ 2.910062] NET: Registered protocol family 16 >>>>>>>>>> [ 2.910494] DMA: preallocated 256 KiB pool for atomic coherent >>>>>>>>>> allocations >>>>>>>>>> [ 2.911276] Kirkwood: MV88F6281-A1, TCLK=200000000. >>>>>>>>>> [ 2.911304] Feroceon L2: Enabling L2 >>>>>>>>>> [ 2.911341] Feroceon L2: Cache support initialised, in WT >>>>>> override >>>>>>>>>> mode. >>>>>>>>>> [ 2.917315] bio: create slab <bio-0> at 0 >>>>>>>>>> [ 2.917938] vgaarb: loaded >>>>>>>>>> [ 2.918313] SCSI subsystem initialized >>>>>>>>>> [ 2.918706] usbcore: registered new interface driver usbfs >>>>>>>>>> [ 2.918759] usbcore: registered new interface driver hub >>>>>>>>>> [ 2.918865] usbcore: registered new device driver usb >>>>>>>>>> [ 2.919575] NetLabel: Initializing >>>>>>>>>> [ 2.919585] NetLabel: domain hash size = 128 >>>>>>>>>> [ 2.919590] NetLabel: protocols = UNLABELED CIPSOv4 >>>>>>>>>> [ 2.919646] NetLabel: unlabeled traffic allowed by default >>>>>>>>>> [ 2.919739] Switching to clocksource orion_clocksource >>>>>>>>>> [ 2.964353] NET: Registered protocol family 2 >>>>>>>>>> [ 2.965044] TCP established hash table entries: 4096 (order: 3, >>>>>>>>>> 32768 bytes) >>>>>>>>>> [ 2.965144] TCP bind hash table entries: 4096 (order: 2, 16384 >>>>>>>>>> bytes) >>>>>>>>>> [ 2.965195] TCP: Hash tables configured (established 4096 bind >>>>>>>>>> 4096) >>>>>>>>>> [ 2.965252] TCP: reno registered >>>>>>>>>> [ 2.965265] UDP hash table entries: 256 (order: 0, 4096 bytes) >>>>>>>>>> [ 2.965287] UDP-Lite hash table entries: 256 (order: 0, 4096 >>>>>>>>>> bytes) >>>>>>>>>> [ 2.965536] NET: Registered protocol family 1 >>>>>>>>>> [ 2.965770] Unpacking initramfs... >>>>>>>>>> [ 4.505970] Freeing initrd memory: 17388K (c7401000 - c84fc000) >>>>>>>>>> [ 4.506712] audit: initializing netlink socket (disabled) >>>>>>>>>> [ 4.506755] type=2000 audit(1.730:1): initialized >>>>>>>>>> [ 4.649878] VFS: Disk quotas dquot_6.5.2 >>>>>>>>>> [ 4.650069] Dquot-cache hash table entries: 1024 (order 0, 4096 >>>>>>>>>> bytes) >>>>>>>>>> [ 4.651722] msgmni has been set to 996 >>>>>>>>>> [ 4.653977] alg: No test for stdrng (krng) >>>>>>>>>> [ 4.654001] NET: Registered protocol family 38 >>>>>>>>>> [ 4.654094] Block layer SCSI generic (bsg) driver version 0.4 >>>>>>>>>> loaded (major 252) >>>>>>>>>> [ 4.654239] io scheduler noop registered >>>>>>>>>> [ 4.654248] io scheduler deadline registered >>>>>>>>>> [ 4.654438] io scheduler cfq registered (default) >>>>>>>>>> [ 4.654937] mv_xor mv_xor.0: Marvell shared XOR driver >>>>>>>>>> [ 4.689874] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) >>>>>>>>>> [ 4.729871] mv_xor mv_xor.0: Marvell XOR: ( xor fill cpy ) >>>>>>>>>> [ 4.730009] mv_xor mv_xor.1: Marvell shared XOR driver >>>>>>>>>> [ 4.769872] mv_xor mv_xor.1: Marvell XOR: ( xor cpy ) >>>>>>>>>> [ 4.809871] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) >>>>>>>>>> [ 4.810253] Serial: 8250/16550 driver, 4 ports, IRQ sharing >>>>>>>>>> enabled >>>>>>>>>> [ 4.831325] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is >>>>>> a >>>>>>>>>> 16550A >>>>>>>>>> [ 5.341356] console [ttyS0] enabled >>>>>>>>>> [ 5.349314] loop: module loaded >>>>>>>>>> [ 5.353009] libphy: Fixed MDIO Bus: probed >>>>>>>>>> [ 5.357333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) >>>>>>>>>> Driver >>>>>>>>>> [ 5.363908] ehci-pci: EHCI PCI platform driver >>>>>>>>>> [ 5.368426] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) >>>>>> Driver >>>>>>>>>> [ 5.374686] uhci_hcd: USB Universal Host Controller Interface >>>>>>>>>> driver >>>>>>>>>> [ 5.381335] usbcore: registered new interface driver usbserial >>>>>>>>>> [ 5.387229] usbcore: registered new interface driver >>>>>>>>>> usbserial_generic >>>>>>>>>> [ 5.393856] usbserial: USB Serial support registered for generic >>>>>>>>>> [ 5.400134] mousedev: PS/2 mouse device common for all mice >>>>>>>>>> [ 5.406313] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 >>>>>>>>>> [ 5.412714] device-mapper: uevent: version 1.0.3 >>>>>>>>>> [ 5.417700] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) >>>>>>>>>> initialised: [email protected] >>>>>>>>>> [ 5.426260] cpuidle: using governor ladder >>>>>>>>>> [ 5.430392] cpuidle: using governor menu >>>>>>>>>> [ 5.434550] hidraw: raw HID events driver (C) Jiri Kosina >>>>>>>>>> [ 5.440614] usbcore: registered new interface driver usbhid >>>>>>>>>> [ 5.446210] usbhid: USB HID core driver >>>>>>>>>> [ 5.450164] drop_monitor: Initializing network drop monitor >>>>>>>>>> service >>>>>>>>>> [ 5.456781] ip_tables: (C) 2000-2006 Netfilter Core Team >>>>>>>>>> [ 5.462192] TCP: cubic registered >>>>>>>>>> [ 5.465519] Initializing XFRM netlink socket >>>>>>>>>> [ 5.470658] NET: Registered protocol family 10 >>>>>>>>>> [ 5.475820] mip6: Mobile IPv6 >>>>>>>>>> [ 5.478801] NET: Registered protocol family 17 >>>>>>>>>> [ 5.483885] registered taskstats version 1 >>>>>>>>>> [ 5.488343] rtc-mv rtc-mv: setting system clock to 2015-09-27 >>>>>>>>>> 19:57:03 UTC (1443383823) >>>>>>>>>> [ 5.497876] Freeing unused kernel memory: 352K (c0679000 - >>>>>>>>>> c06d1000) >>>>>>>>>> [ 5.528598] systemd[1]: systemd 208 running in system mode. (+PAM >>>>>>>>>> +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTS) >>>>>>>>>> [ 5.541643] systemd[1]: Running in initial RAM disk. >>>>>>>>>> Welcome to RedSleeve Linux 7 (Core) dracut-033-241.el7.5 >>>>>>> (Initramfs)! >>>>>>>>>> [ 5.570158] systemd[1]: No hostname configured. >>>>>>>>>> [ 5.574732] systemd[1]: Set hostname to <localhost>. >>>>>>>>>> [ 5.580294] systemd[1]: Initializing machine ID from random >>>>>>>>>> generator. >>>>>>>>>> [ 5.820021] systemd[1]: Expecting device >>>>>>>>>> dev-disk-by\x2dlabel-rootfs.device... >>>>>>>>>> Expecting device dev-disk-by\x2dlabel-rootfs.device... >>>>>>>>>> [ 5.849927] systemd[1]: Starting -.slice. >>>>>>>>>> [ OK ] Created slice -.slice. >>>>>>>>>> [ 5.869906] systemd[1]: Created slice -.slice. >>>>>>>>>> [ 5.874729] systemd[1]: Starting System Slice. >>>>>>>>>> [ OK ] Created slice System Slice. >>>>>>>>>> [ 5.899902] systemd[1]: Created slice System Slice. >>>>>>>>>> [ 5.905124] systemd[1]: Starting Slices. >>>>>>>>>> [ OK ] Reached target Slices. >>>>>>>>>> [ 5.929891] systemd[1]: Reached target Slices. >>>>>>>>>> [ 5.934655] systemd[1]: Starting Timers. >>>>>>>>>> [ OK ] Reached target Timers. >>>>>>>>>> [ 5.959887] systemd[1]: Reached target Timers. >>>>>>>>>> [ 5.964652] systemd[1]: Starting Journal Socket. >>>>>>>>>> [ OK ] Listening on Journal Socket. >>>>>>>>>> [ 5.989898] systemd[1]: Listening on Journal Socket. >>>>>>>>>> [ 5.995537] systemd[1]: Started dracut ask for additional cmdline >>>>>>>>>> parameters. >>>>>>>>>> [ 6.003884] systemd[1]: Started dracut cmdline hook. >>>>>>>>>> [ 6.010230] systemd[1]: Started dracut pre-udev hook. >>>>>>>>>> [ 6.015601] systemd[1]: Starting Apply Kernel Variables... >>>>>>>>>> Starting Apply Kernel Variables... >>>>>>>>>> [ 6.043113] systemd[1]: Started Load Kernel Modules. >>>>>>>>>> [ 6.048554] systemd[1]: Starting Create list of required static >>>>>>>>>> device nodes for the current kernel... >>>>>>>>>> Starting Create list of required static device nodes...rrent >>>>>>>>>> kernel... >>>>>>>>>> [ 6.092081] systemd[1]: Starting Setup Virtual Console... >>>>>>>>>> Starting Setup Virtual Console... >>>>>>>>>> [ 6.109634] systemd[1]: Starting Journal Service... >>>>>>>>>> Starting Journal Service... >>>>>>>>>> [ OK ] Started Journal Service. >>>>>>>>>> [ 6.150073] systemd[1]: Started Journal Service. >>>>>>>>>> [ OK ] Listening on udev Kernel Socket. >>>>>>>>>> [ OK ] Listening on udev Control Socket. >>>>>>>>>> [ OK ] Reached target Sockets. >>>>>>>>>> [ OK ] Reached target Swap. >>>>>>>>>> [ OK ] Reached target Local File Systems. >>>>>>>>>> [ OK ] Started Apply Kernel Variables. >>>>>>>>>> [ OK ] Started Setup Virtual Console. >>>>>>>>>> [ OK ] Started Create list of required static device nodes >>>>>>>>>> ...current kernel. >>>>>>>>>> Starting Create static device nodes in /dev... >>>>>>>>>> [ OK ] Started Create static device nodes in /dev. >>>>>>>>>> Starting udev Kernel Device Manager... >>>>>>>>>> [ OK [ 6.444780] systemd-udevd[70]: starting version 208 >>>>>>>>>> ] Started udev Kernel Device Manager. >>>>>>>>>> Starting udev Coldplug all Devices... >>>>>>>>>> [ OK ] Started udev Coldplug all Devices. >>>>>>>>>> Starting dracut initqueue hook... >>>>>>>>>> [ OK ] Reached target System Initialization. >>>>>>>>>> Starting Show Plymouth Boot Screen... >>>>>>>>>> Mounting Configuration File System... >>>>>>>>>> [ OK ] Mounted Configuration File System. >>>>>>>>>> [ OK ] Started Show Plymouth Boot Screen. >>>>>>>>>> [ OK ] Reached target Paths. >>>>>>>>>> [ OK ] Reached target Basic System. >>>>>>>>>> [ 6.974377] sata_mv sata_mv.0: cannot get optional clkdev >>>>>>>>>> [ 7.041830] sata_mv sata_mv.0: slots 32 ports 1 >>>>>>>>>> [ 7.132086] scsi0 : sata_mv >>>>>>>>>> [ 7.135215] ata1: SATA max UDMA/133 irq 21 >>>>>>>>>> G[ 7.158580] mvsdio mvsdio: no pins associated >>>>>>>>>> [ 7.199841] mvsdio mvsdio: lacking card detect (fall back to >>>>>>>>>> polling) >>>>>>>>>> [ 7.239248] mmc0: new high speed SDIO card at address 0001 >>>>>>>>>> [ 7.335884] cfg80211: Calling CRDA to update world regulatory >>>>>>>>>> domain >>>>>>>>>> [ 7.349952] libertas_sdio: Libertas SDIO driver >>>>>>>>>> [ 7.354506] libertas_sdio: Copyright Pierre Ossman >>>>>>>>>> [ 7.361833] libertas_sdio: failed to find firmware (-2) >>>>>>>>>> [ 7.479794] ata1: SATA link down (SStatus 0 SControl F300) >>>>>>>>>> dracut-initqueue[85]: Warning: Could not boot. >>>>>>>>>> [ OK ] Mounted Configuration File System. >>>>>>>>>> [ OK ] Started Show Plymouth Boot Screen. >>>>>>>>>> [ OK ] Reached target Paths. >>>>>>>>>> [ OK ] Reached target Basic System. >>>>>>>>>> Gdracut-initqueue[85]: Warning: Could not boot. >>>>>>>>>> dracut-initqueue[85]: Warning: /dev/disk/by-label/rootfs does not >>>>>>>>>> exist >>>>>>>>>> Starting Dracut Emergency Shell... >>>>>>>>>> Warning: /dev/disk/by-label/rootfs does not exist >>>>>>>>>> Generating "/run/initramfs/rdsosreport.txt" >>>>>>>>>> Entering emergency mode. Exit the shell to continue. >>>>>>>>>> Type "journalctl" to view system logs. >>>>>>>>>> You might want to save "/run/initramfs/rdsosreport.txt" to a USB >>>>>>>>>> stick or /boot >>>>>>>>>> after mounting them and attach it to a bug report. >>>>>>>>>> dracut:/# >>>>>>>>>>> On Sep 21, 2015, at 2:34 AM, Jacco Ligthart >>>>>> <[email protected]> >>>>>>>>>>> wrote: >>>>>>>>>>>> On 09/20/15 19:18, Ioan Stan wrote: >>>>>>>>>>>> Hi Jacco, >>>>>>>>>>>> Really appreciated. Before proceeding, I'd like to confirm the >>>>>>>>>>>> steps (assuming similar procedure as for F18 in the link below) >>>>>>>>>>>> 1. xzcat dream* /dev/sdb (if the SD card is sdb; or use dd) >>>>>>>>>>>> 2. Configure u-boot (one that supports ext2) >>>>>>>>>>>> printenv >>>>>>>>>>>> set bootargs 'console=ttyS0,115200 root=LABEL=rootfs rootwait' >>>>>>>>>>>> set loadInitrd 'ext2load usb 1:1 0x7400000 uInitrd' >>>>>>>>>>>> set loadImage 'ext2load usb 1:1 0x6400000 uImage' >>>>>>>>>>>> set bootcmd 'usb start; ${loadImage}; ${loadInitrd} ; bootm >>>>>>>>>>>> 0x6400000 0x7400000' >>>>>>>>>>>> saveenv >>>>>>>>>>>> boot >>>>>>>>>>> yes, that's also how I think it should work. The first partition >>>>>>> in >>>>>>>>>>> the image is an ext2 partition with indeed the files uInitrd and >>>>>>>>>>> uImage. These files come from a kernel-kirkwood of F18. I'm not >>>>>>> sure >>>>>>>>>>> if the uboot things should reference usb if we really boot from >>>>>>> SD, >>>>>>>>>>> but if this works for you right now for F18, it should be >>>>>> similar >>>>>>>>>>> for RSEL7. >>>>>>>>>>> Jacco >>>>> _______________________________________________ >>>>> users mailing list >>>>> [email protected] >>>>> http://lists.redsleeve.org/mailman/listinfo/users >>>> _______________________________________________ >>>> users mailing list >>>> [email protected] >>>> http://lists.redsleeve.org/mailman/listinfo/users >>> _______________________________________________ >>> users mailing list >>> [email protected] >>> http://lists.redsleeve.org/mailman/listinfo/users > > _______________________________________________ > users mailing list > [email protected] > http://lists.redsleeve.org/mailman/listinfo/users _______________________________________________ users mailing list [email protected] http://lists.redsleeve.org/mailman/listinfo/users
