Hello Pierre,
The former isoview() implementation mixed some poor isometrical tuning,
with some unrelated rebounding action.
This is why both types of actions have been split:
* isoview deals only with the isometrical view, in a richer way than
formerly: Please see history sections and compare synopses
https://help.scilab.org/docs/6.0.0/en_US/isoview.html with the former
https://help.scilab.org/docs/5.5.2/en_US/isoview.html
* replot(), whose dedicated action is to rebound axes, has also been
extended a lot in Scilab: Please compare
https://help.scilab.org/docs/6.0.0/en_US/replot.html with the former
https://help.scilab.org/docs/5.5.2/en_US/replot.html
Users were warned about this isoview change for 3 years.
So, the replacement for the former isoview([xmin,xmax,ymin,ymax]) is simply
isoview
replot([xmin,ymin,xmax,ymax])
with extended features with bounds values.
Maybe you think that replot() is not a nice name, not describing the
actual action of replot().
I would definitively agree. But reframing axes has aways been its
dedicated action.
And isoview() wasn't the right name to support (poor) rebounding
features, either
I hope you will appreciate and use recent isoview and replot features,
separately.
Best regards
Samuel
Le 27/02/2020 à 12:18, Perrichon a écrit :
Hello,
I’ve seen that syntax change for the isoview in scilab 6.1.0 :
isoview(gcf(), "on") // Scilab 6.1.0
In that case I must take a new time bounds in Nyquist and positionning
0 dB, 3 dB and so on
In my GUI, I personnaly prefer this fonction in scilab 5.5.2, where I
can fixe limits for the drawing
isoview(-1.0,1.0,-1.0,1.0); // Scilab 5.5.2
So I’ve done a copy of isoview Scilab 5.5.2, call Isoview, and
automaticcaly load at scilab 6.1.0 in the scilab.ini of SCIHOME
I hope this solution will be sustainable
Isoview in GUI - Scilab 5.5.2
Best regards
_______________________________________________
users mailing list
[email protected]
http://lists.scilab.org/mailman/listinfo/users
_______________________________________________
users mailing list
[email protected]
http://lists.scilab.org/mailman/listinfo/users
