Hello Samuel
Its OK. I get exactly the same shape Thanks you so much Pierre P. De : users <[email protected]> De la part de Samuel Gougeon Envoyé : jeudi 27 février 2020 15:35 À : [email protected] Objet : Re: [Scilab-users] Isoview in GUI - Scilab 6.1.0 Hello Pierre, The former isoview() implementation mixed some poor isometrical tuning, with some unrelated rebounding action. This is why both types of actions have been split: * isoview deals only with the isometrical view, in a richer way than formerly: Please see history sections and compare synopses https://help.scilab.org/docs/6.0.0/en_US/isoview.html with the former https://help.scilab.org/docs/5.5.2/en_US/isoview.html * replot(), whose dedicated action is to rebound axes, has also been extended a lot in Scilab: Please compare https://help.scilab.org/docs/6.0.0/en_US/replot.html with the former https://help.scilab.org/docs/5.5.2/en_US/replot.html Users were warned about this isoview change for 3 years. So, the replacement for the former isoview([xmin,xmax,ymin,ymax]) is simply isoview replot([xmin,ymin,xmax,ymax]) with extended features with bounds values. Maybe you think that replot() is not a nice name, not describing the actual action of replot(). I would definitively agree. But reframing axes has aways been its dedicated action. And isoview() wasn't the right name to support (poor) rebounding features, either I hope you will appreciate and use recent isoview and replot features, separately. Best regards Samuel Le 27/02/2020 à 12:18, Perrichon a écrit : Hello, Ive seen that syntax change for the isoview in scilab 6.1.0 : isoview(gcf(), "on") // Scilab 6.1.0 In that case I must take a new time bounds in Nyquist and positionning 0 dB, 3 dB and so on In my GUI, I personnaly prefer this fonction in scilab 5.5.2, where I can fixe limits for the drawing isoview(-1.0,1.0,-1.0,1.0); // Scilab 5.5.2 So Ive done a copy of isoview Scilab 5.5.2, call Isoview, and automaticcaly load at scilab 6.1.0 in the scilab.ini of SCIHOME I hope this solution will be sustainable Isoview in GUI - Scilab 5.5.2 Best regards _______________________________________________ users mailing list [email protected] <mailto:[email protected]> http://lists.scilab.org/mailman/listinfo/users
_______________________________________________ users mailing list [email protected] http://lists.scilab.org/mailman/listinfo/users
