Hi,
thanks for the answer. This is a example-project especially aimed at
setting up the test-envoirnment (JsfUnit + Arquillian) e.g. a
proof-of-concept. Iam quite sure skipping some tests won't work because
the chances are slim that the tests do actually run (no
glassfish-embedded-starting up) and I'm quite positive that the error
occurs in the test-initialization!
I already tried the -X and -e parameters, they don't show me any
error-messages! The last thing i could try is to set -Dmaven.repo.local
to ensure that nothing in my local repository is causing trouble but i
doubt this will help!
Am 03.11.2010 10:12, schrieb Anders Hammar:
Weird. But executing
mvn clean test -X
will give you debug output and should give you some kind of hint what's
wrong.
At least, it will tell you which plugin is running into trouble (I believe
it's the surefire-plugin based on your mail).
You could also try skipping tests to narrow things down. There are several
different ways:
mvn clean test -DskipTests
which will compile the tests but not execute them
mvn clean test -Dmaven.test.skip=true
which will even skip compilation of tests and some other related tasks
Doing "clean" in all steps is just to ensure a full build now when you are
having troubles. You shouldn't do this normally for every execution.
You could also delete your local repo to ensure there's nothing there
causing trouble.
/Anders
On Wed, Nov 3, 2010 at 08:02, Moritz Winter
<[email protected]>wrote:
Hi,
First of all I would like to mention that this is my first post on this
list, I hope that this question is posted in the right place. I have tried
finding a solution for my problem, but it either doesn't exist, or my
limited brain can't manage to figure out how to do it (I strongly hope it is
the latter).
If I call "mvn test" on a project of mine, the last lines show me the
BuildFailureExeception and "Please refer to [..]/target/surefire-reports for
the individual test results."
Problem is, there isn't a directory "surefire-reports" in the target of the
project. Adding -e and -X, trying -Dmaven.test.failure.ignore=true generated
a empty report and -Dsurefire.useFile=false didnt help either. Any
suggestions how to get to the root cause of the error?
Used version is surefire 2.6, but i did try 2.2 - 2.6 and none worked!
Project: http://rapidshare.com/files/428614057/arquillian-example.zip
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
