Hi, The password is cisco if it's default without any spesific config.
-Atle * Scott Yagel <[EMAIL PROTECTED]> [070221 19:41]: > Steve, > > Thanks, this worked really well. I managed to update one of the phones, at > least to a certain point. It downloaded the new image and read at least > part of the configuration file. It is now sitting at the "Phone > Unprovisioned" state. The only problem I have now is that, to complete the > provisioning, I can't seem to get the Network Configuration unlocked. The > old method of hitting **# doesn't seem to work any more. > > Thanks again, > Scott Yagel > PacketCall, Inc. > [EMAIL PROTECTED] > > -----Original Message----- > From: Stephen Varga [mailto:[EMAIL PROTECTED] > Sent: Wednesday, February 21, 2007 11:38 AM > To: [EMAIL PROTECTED] > Cc: [email protected] > Subject: Re: [Users] Cisco 7960 phones > > Scott, > > Put the attached files into your tftp server that the phones are pulling > their configs and image from. You should also have the following image > files in the same tftp server: > > P003-08-2-00.bin > P0S3-08-2-00.loads > P0S3-08-2-00.zip > P003-08-2-00.sbn > P0S3-08-2-00.sb2 > > I have used these files to successfully upgrade phones. > > If you have SIPxxxxxxxxxxxx.cnf file created for the phones, make sure > the image_version line is commented out. > > The biggest problem I have with this version is using that it reads the > dialplan.xml file but it does not work; I am guessing there is a syntax > change but can not been able to find SIP documentation related to the > 8.2 code on Cisco's website. I have been staying with the 7.5 version > of the code because of this problem. > > I found watching which files are being requested by phone a big help in > getting the loads to work properly > > Let me know what happens. > > Steve > > > > _______________________________________________ > Users mailing list > [email protected] > http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
