There is no browser support for these phones. The configuration is
either done manually via the keypad llike you just did or via a text
file that is stored on your tftp server.
You can enable telnet access to the phone, this will allow you to
somethings but not provision it.
Steve
Scott Yagel wrote:
Ok, I figured out how to unlock the config, using the new menu item called (doh!)
"unlock config". One 7960 phone now a functioning SIP phone on the OpenSER.
Last thing to figure out is why I cannot access it by browser.
Thanks again for the help.
Scott Yagel
PacketCall, Inc.
[EMAIL PROTECTED]
-----Original Message-----
From: Stephen Varga [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 21, 2007 11:38 AM
To: [EMAIL PROTECTED]
Cc: [email protected]
Subject: Re: [Users] Cisco 7960 phones
Scott,
Put the attached files into your tftp server that the phones are pulling
their configs and image from. You should also have the following image
files in the same tftp server:
P003-08-2-00.bin
P0S3-08-2-00.loads
P0S3-08-2-00.zip
P003-08-2-00.sbn
P0S3-08-2-00.sb2
I have used these files to successfully upgrade phones.
If you have SIPxxxxxxxxxxxx.cnf file created for the phones, make sure
the image_version line is commented out.
The biggest problem I have with this version is using that it reads the
dialplan.xml file but it does not work; I am guessing there is a syntax
change but can not been able to find SIP documentation related to the
8.2 code on Cisco's website. I have been staying with the 7.5 version
of the code because of this problem.
I found watching which files are being requested by phone a big help in
getting the loads to work properly
Let me know what happens.
Steve
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
