Ok, I figured out how to unlock the config, using the new menu item called (doh!) "unlock config". One 7960 phone now a functioning SIP phone on the OpenSER. Last thing to figure out is why I cannot access it by browser.
Thanks again for the help. Scott Yagel PacketCall, Inc. [EMAIL PROTECTED] >-----Original Message----- >From: Stephen Varga [mailto:[EMAIL PROTECTED] >Sent: Wednesday, February 21, 2007 11:38 AM >To: [EMAIL PROTECTED] >Cc: [email protected] >Subject: Re: [Users] Cisco 7960 phones > >Scott, > >Put the attached files into your tftp server that the phones are pulling >their configs and image from. You should also have the following image >files in the same tftp server: > > P003-08-2-00.bin > P0S3-08-2-00.loads > P0S3-08-2-00.zip > P003-08-2-00.sbn > P0S3-08-2-00.sb2 > >I have used these files to successfully upgrade phones. > >If you have SIPxxxxxxxxxxxx.cnf file created for the phones, make sure >the image_version line is commented out. > >The biggest problem I have with this version is using that it reads the >dialplan.xml file but it does not work; I am guessing there is a syntax >change but can not been able to find SIP documentation related to the >8.2 code on Cisco's website. I have been staying with the 7.5 version >of the code because of this problem. > >I found watching which files are being requested by phone a big help in >getting the loads to work properly > >Let me know what happens. > >Steve >
_______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
