Hello! Ovirt 3.4 here, Windows 2008 R2 installed with virtio-win-0.1-74.iso, worked perfect, no problem encountered.
On Tue, May 6, 2014 at 1:42 PM, Paul.LKW <paul....@gmail.com> wrote: > Hi Daniel: > But poorly is I tried use IDE only and in such setting I even could not > see any hard drive and Windows always asking driver !!! > Disapointed for oVirt !!! > > BR, > Paul.LKW > > > 於 6/5/2014 14:36, Daniel Helgenberger 提到: > > Hello Paul, > > I run both windows server 2008r2/2012r2 in oVirt 3.4 (qemu/kvm for that > matter). > > I can only recommend to try the following procedure in dealing with > virtio-blk and virtio-scsi: > Install Windows on a IDE drive; add a second image virtio-scsi. > After the installation finishes install the driver for the unknown > controller you find in device management with 'update driver' > Shutdown the vm, change the boot disk to virtio-scsi or virtio-blk > respectively and remove the second disk if you like. > > Hope this helps, > > -- > Daniel Helgenberger > m box bewegtbild GmbH > > P: +49/30/2408781-22 > F: +49/30/2408781-10 > ACKERSTR. 19 > D-10115 BERLIN > www.m-box.de www.monkeymen.tv > > Am 05.05.2014 um 17:29 schrieb "Paul.LKW" <paul....@gmail.com>: > > Hi All: > I just even tryied to use IDE only and the Windows 08 server R2 still > could not find any harddisk, what does this bug exists in version 3.4? does > it suitable for production? which one should I report this bug for ? > > Paul.LKW > > > 於 4/5/2014 21:17, Paul.LKW 提到: > > Hi Jooppoor > It should be show me the harddisk drive after the driver installed and > then change back to the installation media disc, but the case is it could > not load the driver correctly I could not see the harddisk drive so even I > change back the media disc should be no meaning? > > Paul.LKW > 於 2014/5/4 下午8:48,"Joop" <jvdw...@xs4all.nl> 寫道: > >> Paul.LKW wrote: >> >>> >>> Hi All: >>> I am new to oVirt and just installed oVirt for a try. >>> Any one could install Win Server 08 R2 with virtio or virtio SCSI from >>> oVirt 3.4? >>> I am already changed the driver during the installation with >>> virtio-win-0.1-74.iso, however I try what ever driver directory for AMD64 >>> it show the device but when I click to select and then click OK, it always >>> say "No new device could be found. Make sure the driver files are correct >>> and located on the driver installation media". >>> Does any other see this issue, and know how to solve? >>> Many thanks >>> >>> Did you change back to your W2K8 iso after loading the driver? >> The installer displays a very misleading message if you don't have your >> iso back in the cdrom after installing the drivers. >> >> Joop >> >> _______________________________________________ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users