Hi,

I seem to have run into a problem setting up ovirt with Fibre Channel storage.

I have a 2MBs SAN and qlogic cards in the nodes.  I used this same setup with 
RHEV about 6 months ago and it just worked, storage was there no problems.  Now 
booting with ovirtnode distro, I am seeing

Sep  9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1: Firmware 
images can be retrieved from: http://ldriver.qlogic.com/firmware/.
Sep  9 08:01:27 localhost kernel: scsi1 : qla2xxx
Sep  9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1: QLogic QLE2460 
- QLogic 4GB FC Single-Port PCI-E HBA for IBM System x.
Sep  9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1: ISP2432: PCIe 
(2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=1 fw=4.00.26 (2).
Sep  9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 
(level, low) -> IRQ 16

I have googled the firmware error and it says some cards need a firmware flash 
and some don't.  These are pretty standard HBAs so I would think they would be 
supported out of the box, but maybe not.  Looking at trying to add the firmware 
looked kind of complex - if I need to do this, does anyone know of a nice and 
easy howto guide on this.  I'm just getting started with ovirt and appreciate  
any help

Thanks

Bill Dossett
Virtualisation Architect

Pitney Bowes - Tech Central
6 Hercules Way, 600 Leavesden Park
Watford, WD25 7GS

Phone (+44) (0)1923 279353 | VOIP: 54739353
Mobile (+44) (0)7775 908612

[email protected]<mailto:[email protected]>
www.pb.com<http://www.pb.com/>

In Engineering? Raise a ticket via Remedy Anywhere 
[HERE<http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx>]
 takes less than a minute


ManageIQ User Guide available 
[HERE<https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf>]

Check out the ManageIQ Blog for recent enhancements and information 
[HERE]<http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx>



________________________________

_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to