On 11.09.2014 12:17, Bill Dossett wrote: > Thanks for responding Daniel. Never mind! > I was wondering and thought the message may be > irrelevant. But yes, it doesn’t appear to be working. When I try to add a > FC > storage domain, no hosts are showing in the drop down box of hosts. I have > loaded the latests ovirtnode (3.4.something…) on two hosts now and neither > are > working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far.
Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. > Also having a lot of issues with configuring the network. I configure > an interface I can ping it, but it shows as unconfigured… on one host I have > added it to the manager and I see the interfaces anyway, but on the second > host > I configure the eth0, I can ping it, it added to the ovirt engine but it > shows > no NICs. Should I be using an earlier version maybe? > > thanks again and best regards. > > > *Bill Dossett* > *Virtualisation Architect* > *Pitney Bowes – Tech Central*** > 6 Hercules Way, 600 Leavesden Park > Watford, WD25 7GS > Phone(+44) (0)1923 279353 | VOIP: 54739353 > Mobile(+44) (0)7775 908612 > [email protected] <mailto:[email protected]> > www.pb.com <http://www.pb.com/> > *In Engineering?**Raise a ticket via Remedy Anywhere [HERE > <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx>]takes > > less than a minute* > > *ManageIQ User Guide available* [*HERE > <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf>*] > *Check out the ManageIQ Blog for recent enhancements and information [HERE] > <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx>* > > On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger > <[email protected] > <mailto:[email protected]>> wrote: > > > Hello Bill, > > > > what are your problems acually? Is fibre channel not working (as expected)? > > > > The log snippet you provided is completly normal and the messages can > > safely be ignored. This is also unrelated to oVirt but rather CentOS (or > > the distro you are running) I suppose. > > > > Cheers! > > > > On 11.09.2014 10:51, Bill Dossett wrote: > >> Hi, > >> > >> I seem to have run into a problem setting up ovirt with Fibre Channel > >> storage. > >> > >> I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup > >> with > >> RHEV about 6 months ago and it just worked, storage was there no problems. > >> Now > >> booting with ovirtnode distro, I am seeing > >> > >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1: Firmware > >> images > >> can be retrieved from: http://ldriver.qlogic.com/firmware/. > >> > >> Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx > >> > >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1: QLogic > >> QLE2460 > >> - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. > >> > >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1: ISP2432: > >> PCIe > >> (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=1 fw=4.00.26 (2). > >> > >> Sep 9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A -> GSI > >> 16 > >> (level, low) -> IRQ 16 > >> > >> I have googled the firmware error and it says some cards need a firmware > >> flash > >> and some don’t. These are pretty standard HBAs so I would think they > >> would be > >> supported out of the box, but maybe not. Looking at trying to add the > >> firmware > >> looked kind of complex – if I need to do this, does anyone know of a nice > >> and > >> easy howto guide on this. I’m just getting started with ovirt and > >> appreciate > >> any help > >> > >> > >> Thanks > >> > >> *Bill Dossett* > >> > >> *Virtualisation Architect* > >> > >> *Pitney Bowes – Tech Central*** > >> > >> 6 Hercules Way, 600 Leavesden Park > >> > >> Watford, WD25 7GS > >> > >> Phone(+44) (0)1923 279353 | VOIP: 54739353 > >> > >> Mobile(+44) (0)7775 908612 > >> > >> [email protected] <mailto:[email protected]> > >> <mailto:[email protected]> > >> > >> www.pb.com <http://www.pb.com> <http://www.pb.com/> > >> > >> *In Engineering?**Raise a ticket via Remedy Anywhere [HERE > >> <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx>]takes > >> > >> > >> less than a minute* > >> > >> *ManageIQ User Guide available*[*HERE > >> <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf>*] > >> > >> *Check out the ManageIQ Blog for recent enhancements and information [HERE] > >> <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx>* > >> > >> > >> -------------------------------------------------------------------------------- > >> > > > > -- > > Daniel Helgenberger > > m box bewegtbild GmbH > > > > P: +49/30/2408781-22 > > F: +49/30/2408781-10 > > > > ACKERSTR. 19 > > D-10115 BERLIN > > > > > > www.m-box.de <http://www.m-box.de> www.monkeymen.tv > > <http://www.monkeymen.tv> > > > > Geschäftsführer: Martin Retschitzegger / Michaela Göllner > > Handeslregister: Amtsgericht Charlottenburg / HRB 112767 > > > > > -------------------------------------------------------------------------------- > -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
