Hi, there is an open bugreport on node that this firmware is missing, this is fixed in master branch:
https://bugzilla.redhat.com/show_bug.cgi?id=1063001 my advice would be to install a plain centos 6.5 and to not use node atm. HTH On 11/09/14 10:51, Bill Dossett wrote: > Hi, > > I seem to have run into a problem setting up ovirt with Fibre Channel storage. > > I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with > RHEV about 6 months ago and it just worked, storage was there no problems. > Now booting with ovirtnode distro, I am seeing > > Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1: Firmware > images can be retrieved from: http://ldriver.qlogic.com/firmware/. > Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx > Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1: QLogic > QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. > Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1: ISP2432: > PCIe (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=1 fw=4.00.26 (2). > Sep 9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 > (level, low) -> IRQ 16 -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
