Hi, according to [1] Fujitsu iRMC should be accessible using IPMI. Now, I looked at logs, but I cannot see any fenceNode exection in vdsm.log. According to engine.log, host Node-02.cracknell.com was used as fence proxy. Are you sure that vdsm.log is from this host?
Thanks Martin [1] https://www.redhat.com/archives/linux-cluster/2010-January/msg00056.html ----- Original Message ----- > From: "Renchu Mathew" <ren...@cracknell.com> > To: "Martin Perina" <mper...@redhat.com> > Cc: users@ovirt.org > Sent: Thursday, January 22, 2015 12:37:51 PM > Subject: RE: [ovirt-users] Power Management config on Ovirt > > Hi Martin, > > Please find attached log files from engine and proxy host. Not sure whether > IPMI or which one can be used. It is Fujitsu iRMC port. I also tried the rsb > but same error. > > Can we configure Power management using Fujitsu iRMC? > > Thanks & Regards > > Renchu Mathew > > -----Original Message----- > From: Martin Perina [mailto:mper...@redhat.com] > Sent: Thursday, January 22, 2015 1:58 PM > To: Renchu Mathew > Cc: users@ovirt.org > Subject: Re: [ovirt-users] Power Management config on Ovirt > > Hi, > > first of all are you sure that Fujitsu PRIMERGY is accessible using IPMI > protocol? If so, could you provide engine.log and also vdsm.log from host > that was used as fencing proxy? You can find out which host is used as a > proxy either in Events tab after you execute the test or in engine.log. > > Thanks > > Martin Perina > > ----- Original Message ----- > > From: "Renchu Mathew" <ren...@cracknell.com> > > To: users@ovirt.org > > Sent: Thursday, January 22, 2015 7:41:43 AM > > Subject: [ovirt-users] Power Management config on Ovirt > > > > > > > > Dear all, > > > > > > > > I am trying to configure power management on ovirt v3.5 > > (ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and using two Fujitsu > > PRIMERGY > > RX2540 M1 as node hypervisor. I used Fujitsu iRMC port on power > > management configuration. The test gives a message “Test failed, > > argument of type ‘NoneType’ is not iterable” as below . Also tried rsb > > type as per redhat document. > > > > > > > > Fence-agents-3.1.5-35.el6_5.4.x86_64 is there on both nodes. Do we > > need to specify anything in Options? > > > > > > > > Please help me. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best Regards > > > > > > > > > > > > Renchu Mathew > > > > > > > > > > > > _______________________________________________ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users