Hi Martin,
Yes. The vdsm host.log is from node-02. I have checked the link and it says we need to install the sever view management agent & net-snmp on the hosts. Do we need to try this? How to install this on node? I used the below irmc admin user. [cid:image001.png@01D03669.DD48B4E0] Regards Renchu Mathew | Sr. IT Administrator CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.com | WEB www.cracknell.com This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please let us know by email reply and delete it from the system. Please note that any views or opinions presented in this email do not necessarily represent those of the company. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The company therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. -----Original Message----- From: Martin Perina [mailto:mper...@redhat.com] Sent: Thursday, January 22, 2015 4:49 PM To: Renchu Mathew Cc: users@ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt Hi, according to [1] Fujitsu iRMC should be accessible using IPMI. Now, I looked at logs, but I cannot see any fenceNode exection in vdsm.log. According to engine.log, host Node-02.cracknell.com was used as fence proxy. Are you sure that vdsm.log is from this host? Thanks Martin [1] https://www.redhat.com/archives/linux-cluster/2010-January/msg00056.html ----- Original Message ----- > From: "Renchu Mathew" <ren...@cracknell.com> > To: "Martin Perina" <mper...@redhat.com> > Cc: users@ovirt.org > Sent: Thursday, January 22, 2015 12:37:51 PM > Subject: RE: [ovirt-users] Power Management config on Ovirt > > Hi Martin, > > Please find attached log files from engine and proxy host. Not sure > whether IPMI or which one can be used. It is Fujitsu iRMC port. I also > tried the rsb but same error. > > Can we configure Power management using Fujitsu iRMC? > > Thanks & Regards > > Renchu Mathew > > -----Original Message----- > From: Martin Perina [mailto:mper...@redhat.com] > Sent: Thursday, January 22, 2015 1:58 PM > To: Renchu Mathew > Cc: users@ovirt.org > Subject: Re: [ovirt-users] Power Management config on Ovirt > > Hi, > > first of all are you sure that Fujitsu PRIMERGY is accessible using > IPMI protocol? If so, could you provide engine.log and also vdsm.log > from host that was used as fencing proxy? You can find out which host > is used as a proxy either in Events tab after you execute the test or in > engine.log. > > Thanks > > Martin Perina > > ----- Original Message ----- > > From: "Renchu Mathew" <ren...@cracknell.com> > > To: users@ovirt.org > > Sent: Thursday, January 22, 2015 7:41:43 AM > > Subject: [ovirt-users] Power Management config on Ovirt > > > > > > > > Dear all, > > > > > > > > I am trying to configure power management on ovirt v3.5 > > (ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and using two Fujitsu > > PRIMERGY > > RX2540 M1 as node hypervisor. I used Fujitsu iRMC port on power > > management configuration. The test gives a message “Test failed, > > argument of type ‘NoneType’ is not iterable” as below . Also tried > > rsb type as per redhat document. > > > > > > > > Fence-agents-3.1.5-35.el6_5.4.x86_64 is there on both nodes. Do we > > need to specify anything in Options? > > > > > > > > Please help me. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best Regards > > > > > > > > > > > > Renchu Mathew > > > > > > > > > > > > _______________________________________________ > > Users mailing list > > Users@ovirt.org<mailto:Users@ovirt.org> > > http://lists.ovirt.org/mailman/listinfo/users > > >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
