> On 03 Jun 2016, at 12:57, Anantha Raghava <[email protected]> > wrote: > > Hello Michal, > > Thanks for quick feed back. > > Windows Guests Agents - Where do I download them from? Not getting the proper > links. Or is to a part of virt-drivers that we use during installation.
Hi Anantha, it’s part of ovirt-guest-tools. See http://lists.ovirt.org/pipermail/users/2016-May/039779.html <http://lists.ovirt.org/pipermail/users/2016-May/039779.html> > > Live migration failure - These are pretty busy VMs if not big. The event does > not show any specific message but just as migration failed. Is the reason > logged somewhere? Please share the log location so that I can check & share > the log for meaningful message and proper screen shots. There should be more details in the events at the bottom of the webadmin page (just make it a bit bigger it may not be te last message) If they are busy VMs then you may have issues migrating them. There is some simple tuning available and it may help. You can increase the maximum downtime in VM properties dialog (500ms by default, you can go up to whatever is feasible for your VM, seconds, tens of seconds) Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you can also tune /etc/vdsm.conf on each host and increase the maximum bandwidth 10 times Thanks, michal > > -- > Thanks & Regards, > > Anantha Raghava > >>> On 03 Jun 2016, at 07:14, Anantha Raghava < >>> <mailto:[email protected]>[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Hi, >>> >>> We have just installed oVirt 3.6 on 3 hosts with storage volumes on Fibre >>> Channel storage box. Every thing is working fine except the following. >>> >>> 1. We have created 15 Virtual Machines all VM with Windows Server 2012 R2 >>> OS. VM properties does not report the Operating System nor it shows the IP >>> and FQDN in the Admin Portal. There is always an exclamation mark that >>> reports about OS being different from the template and timezone issues. We >>> have changed the timezone to Indian Standard Time in both VM and Host, same >>> result continues. We have installed Windows Gues Tools, same result >>> continues. Screen shot is below. >> >> you doesn’t seem to run the guest agent. Make sure the service is started >> and works, then you’ll see IPs and more detailed info about each guest, and >> exclamation marks should go away >> >>> >>> <VMs.PNG> >>> >>> 2. When we manually tried to migrate the VMs from one host to another one, >>> the migration gets initiated, but will eventually fail. >>> >>> Any specific setting missing here or is it a bug. >> >> are they big or busy VMs? What does it fail on? There should be a menaingful >> message even if it’s just a timeout >> >>> >>> Note: >>> >>> All hosts are installed with CentOS 7.2 minimal installation oVirt node is >>> installed and activated. >>> We do not have a DNS in our environment. We have to do with IPs. >> >> as long as engine works with FQDN it’s ok >> >>> We are yet to apply the 3.6.6 patch on Engine and Nodes. >> >> that may help with some of the issues above, so please try to do that >> >> Thanks, >> michal >> >>> We are running a stand alone engine, not a Hosted Engine. >>> -- >>> Thanks & Regards, >>> >>> >>> Anantha Raghava >>> eXza Technology Consulting & Services >>> >>> _______________________________________________ >>> Users mailing list >>> [email protected] <mailto:[email protected]> >>> http://lists.ovirt.org/mailman/listinfo/users >>> <http://lists.ovirt.org/mailman/listinfo/users> >> >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
