> On Jun 7, 2016, at 11:13 PM, Pavel Gashev <[email protected]> wrote: > > It seems guest tools installer is broken at least for Windows 2012 R2. It > installs files into Program Files, but doesn't actually install drivers and > QEMU guest tools. No errors, it reports that everything is ok, but it's not. > oVirt guest tools is installed and work properly. > > Workarounds are the following: > 1. Start Device Manager and make sure all devices have drivers. Install > drivers from «C:\Program Files (x86)\oVirt Guest Tools\drivers» if needed. Do > not install video driver. > 2. Start «C:\Program Files (x86)\oVirt Guest Tools\drivers\qemu-ga-x64.exe» > manually. > 3. Rename «C:\Program Files (x86)\oVirt Guest Tools\drivers\Balloon\2k12R2» > into «…\w2k12R2», otherwise installed balloon service doesn't start. >
Lev: This ^ looks like a regression in the installer - Please have a look :-) Thanks > > From: <[email protected] <mailto:[email protected]>> on behalf of > Anantha Raghava <[email protected] > <mailto:[email protected]>> > Organization: eXza Technology Consulting & Services > Reply-To: "[email protected]" <[email protected]> > Date: Tuesday 7 June 2016 at 20:43 > To: Michal Skrivanek <[email protected]> > Cc: users <[email protected]> > Subject: Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues. > > Hello Michal, > > Guest tools are working and getting all details about guest vm as needed. > > But one thing I didn't understand. What is the relationship between > virtioserial driver and oVirt Guest Service? Without virtio serial driver, > guest services does not start. > > Also, how do we install memory baloon driver? > > Tomorrow morning, I will post about Live Migration events after I attempt it. > -- > > Thanks & Regards, > > Anantha Raghava > > On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote: > > On 03 Jun 2016, at 12:57, Anantha Raghava <[email protected] > <mailto:[email protected]>> wrote: > > Hello Michal, > > Thanks for quick feed back. > > Windows Guests Agents - Where do I download them from? Not getting the proper > links. Or is to a part of virt-drivers that we use during installation. > > Hi Anantha, > it’s part of ovirt-guest-tools. See > http://lists.ovirt.org/pipermail/users/2016-May/039779.html > <http://lists.ovirt.org/pipermail/users/2016-May/039779.html> > > > Live migration failure - These are pretty busy VMs if not big. The event does > not show any specific message but just as migration failed. Is the reason > logged somewhere? Please share the log location so that I can check & share > the log for meaningful message and proper screen shots. > > There should be more details in the events at the bottom of the webadmin page > (just make it a bit bigger it may not be te last message) > If they are busy VMs then you may have issues migrating them. There is some > simple tuning available and it may help. You can increase the maximum > downtime in VM properties dialog (500ms by default, you can go up to whatever > is feasible for your VM, seconds, tens of seconds) > Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you > can also tune /etc/vdsm.conf on each host and increase the maximum bandwidth > 10 times > > Thanks, > michal > > > > -- > Thanks & Regards, > > > > Anantha Raghava > > On 03 Jun 2016, at 07:14, Anantha Raghava <[email protected] > <mailto:[email protected]>> wrote: > > Hi, > > We have just installed oVirt 3.6 on 3 hosts with storage volumes on Fibre > Channel storage box. Every thing is working fine except the following. > > 1. We have created 15 Virtual Machines all VM with Windows Server 2012 R2 OS. > VM properties does not report the Operating System nor it shows the IP and > FQDN in the Admin Portal. There is always an exclamation mark that reports > about OS being different from the template and timezone issues. We have > changed the timezone to Indian Standard Time in both VM and Host, same result > continues. We have installed Windows Gues Tools, same result continues. > Screen shot is below. > > you doesn’t seem to run the guest agent. Make sure the service is started and > works, then you’ll see IPs and more detailed info about each guest, and > exclamation marks should go away > > > > <VMs.PNG> > > 2. When we manually tried to migrate the VMs from one host to another one, > the migration gets initiated, but will eventually fail. > > Any specific setting missing here or is it a bug. > > are they big or busy VMs? What does it fail on? There should be a menaingful > message even if it’s just a timeout > > > > Note: > > All hosts are installed with CentOS 7.2 minimal installation oVirt node is > installed and activated. > We do not have a DNS in our environment. We have to do with IPs. > > as long as engine works with FQDN it’s ok > > > We are yet to apply the 3.6.6 patch on Engine and Nodes. > > that may help with some of the issues above, so please try to do that > > Thanks, > michal > > > We are running a stand alone engine, not a Hosted Engine. > -- > Thanks & Regards, > > > > Anantha Raghava > eXza Technology Consulting & Services > > _______________________________________________ > Users mailing list > [email protected] <mailto:[email protected]> > http://lists.ovirt.org/mailman/listinfo/users > <http://lists.ovirt.org/mailman/listinfo/users> > > > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
