Here is the disk section of my vm,
...
<disk type='block' device='disk'>
<driver name='qemu' type='raw' cache='none' io='native'/>
<source dev='/dev/mapper/vg_01-lv_sys'/>
<target dev='vda' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07'
function='0x0'/>
</disk>
<disk type='block' device='disk'>
<driver name='qemu' type='raw' cache='none' io='native'/>
<source dev='/dev/sdc'/>
<target dev='vdb' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08'
function='0x0'/>
</disk>
...
nelson
----- Original Message -----
From: "Shahar Havivi" <shav...@redhat.com>
To: "Nelson Lameiras" <nelson.lamei...@lyra-network.com>
Cc: "Nisim Simsolo" <nsims...@redhat.com>, users@ovirt.org
Sent: Tuesday, September 20, 2016 8:04:41 AM
Subject: Re: [ovirt-users] can't import vm from KVM host
On 19.09.16 18:11, Nelson Lameiras wrote:
> Well I think I have a rather "classical" environment :
>
> This is the test setup I created (from scratch) in order to simulate future
> migrations (which will be used to migrate our hundreds of vm in production)
>
> On one side, I have a x86_64 centos7.2+KVM hosting one VM with 2 iscsi disks
> :
> 1 LVM block device /dev/mapper/vg_01-lv_sys, using virtio
> 1 block device /dev/sdc, using virtio
>
> on the other side, I have a x86_64 centos 7.2 oVirt cluster (2 hosts, same
> hardware as KVM hosts) installed with 4.0.3 oVirt (hosts and engine) fully
> upgraded to 4.0.4RC1 (hosts and engine)
> Target would be oVirt iscsi Data Domain disk (which is irrelevant because the
> problem I'm describing arises before selecting oVirt target)
>
> I'm using the GUI to test the native import capabilities of oVirt "Import VM"
> When selecting KVM import, putting correct URL data (using either tcp or ssh
> transport), I get a list of VM machines running in the KVM cluster (for this
> exemple, only the one VM described above), but the disk count is always 0.
> Which makes it impossible to import the VM.
>
> I should add that I made the same VM import using "local hard drives" (ie.
> local raw file) and it works as expected, I can see one or multiple disks and
> import them easily to oVirt. The problem seems to manifest itself only when
> importing disks using block devices directly.
>
> Do you need more information from me, or make more tests?
>
> thanks a lot,
> nelson
Can you post the libvirt xml as attachment here (at least the disks sections):
$ virsh -r dumpxml <vmname>
Shahar.
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
